README.en.md · 光光/卧龙 Tiny-M 小辰DIY 修改版

# Voron Tiny-M By 小辰DIY

#### Description
This open source full information file is modified based on Voron Tiny-M 3D printer, with the molding size of 150 * 150 * 180. For the specific machine assembly video, search 小辰DIY at www.bilibili.com

#### Full information includes

1.  MKS installation klipper full information
2.  SW model file: modified model file (with Voron 0/0.1 model file), guide rail positioning part, positioning and punching auxiliary part, assembly profile positioning part
3.  STL printed copies: ab motor, E3D V6 nozzle, gantry, front AB synchronous belt, skirt, hot bed and auxiliary positioning parts
4.  小辰DIY Tiny-M purchase hardware BOM Table + screw purchase + positioning tapping
5.  2040 profile parameter diagram

#### The machine configuration is as follows

1.  Upper computer: Orange Pi zero2
2.  Lower computer: MKS Robin E3D
3.  Hot bed: 100 X 100 mm silica gel heating pad + 150 X 150 X 8 mm aluminum plate + 150 X 150 mm Pei magnetic steel plate

#### Description of modifications

1.  The z-axis zeroing of the official original version adopts the way of touching the mechanical limit on the right side of the hot bed to zero. The modified version removes the mechanical limit and changes it to the photoelectric limit on the left side of the hot bed to zero, and the zeroing height is adjusted by screwing the screw to facilitate adjustment.
2.  E3D V6 remote hot end is adopted, mgn12 and mgn12 extended slider are adopted for X-axis guide rail, and the modified version has been adapted to the extended slider.
3.  The hole depth of hot bed and z-axis guide rail connector does not correspond, and the screw length in the purchase table of adapter screw has been modified.

#### Time and content of updated version

1.  Release v1.0 on May 12, 2022 0 modified version
2.  Release v1.2 on May 14, 2022 Revision 2 revision.Content: fix the height of the adjusting screw in the connection between the hot bed and the z-axis guide rail to make it more unsupported, print and repair v1 In version 0, the E3D V6 nozzle is incorrectly connected with the mgn12 extended slider, which has been perfectly adapted to the mgn12 extended slider

#### Gitee Feature

1.  You can use Readme\_XXX.md to support different languages, such as Readme\_en.md, Readme\_zh.md
2.  Gitee blog [blog.gitee.com](https://blog.gitee.com)
3.  Explore open source project [https://gitee.com/explore](https://gitee.com/explore)
4.  The most valuable open source project [GVP](https://gitee.com/gvp)
5.  The manual of Gitee [https://gitee.com/help](https://gitee.com/help)
6.  The most popular members  [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)

光光/卧龙 Tiny-M 小辰DIY 修改版

简介

发行版

贡献者

近期动态

光光/卧龙 Tiny-M 小辰DIY 修改版 .gitee-modal { width: 500px !important; }

简介

发行版

贡献者

近期动态

搜索帮助

光光/卧龙 Tiny-M 小辰DIY 修改版