Compile

[www]
[1] make

[server]
[2] make

Install

[3] Command 'make install' to install 'boa boa.conf and cgi-bin/ActiveX ...' to rootfs.

Run

[4] After reboot. run 'run_app.sh --sensor ov9710' and then you can use URL 'http://yourtargetip/html/demo.cgi?page=0&stream=0' or 'http://yourtargetip/cgi-bin/view.cgi' to view real-time video. eg:'http://192.168.103.47/cgi-bin/demo.cgi?page=0&stream=0'.Remenber to use IE.
    osd page      : http://192.168.103.47/cgi-bin/demo.cgi?page=3&stream=0
    liveview page : http://192.168.103.47/cgi-bin/demo.cgi?page=0&stream=0
    enc page      : http://192.168.103.47/cgi-bin/demo.cgi?page=1&stream=0
    3A  page      : http://192.168.103.47/cgi-bin/demo.cgi?page=2
    

notice:

[1] if you not install activeX cab please download it from 'http://yourtargetip/activeX/GOKEWeb.cab' and install it.run install.bat in cmd.
[2] please ensure your are the administrator && command 'regsvr32' can be use in your WindowsXP/7.
[3] please install 'ffdshow v1.3.4533 [2014-09-29]','microsoft .net framework 4.0'.

[Log]

The folling is the correct log. please check it.

# run_app.sh --sensor ov2710
dsp: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
img: aaa_fifo2_base malloc c2e60000
Vout notice: vout0:0 probed!
Vout notice: vout1:1 probed!
Vin info: amba_vin_vsync_bind to gpio with 0ns delay!
Vin notice: vin0:0 probed!
>>>>>> DSP LOG ADDR START PHY 0xc0080000 
Vout notice: CVBS:0@1 probed!
Vout notice: DBus-All:1@0 probed!
Vout notice: DBus-LCD:2@1 probed!
Vout notice: HDMI:3@1 probed!
Vin info: OV2710 sensor ID is 0x2710
Vin info: OV2710 init(parallel)
amba_debug_init 248:248.
Use default settings
map_size = 0x300000
nr_item = 3
addr_offset = 0x0 filename = orccode.bin
addr_offset = 0x200000 filename = orcme.bin
addr_offset = 0x2a0000 filename = default_binary.bin
mmap returns 0xb6b3b000
loading /lib/firmware/orccode.bin...addr = 0xb6b3b000, size = 0x19e696
loading /lib/firmware/orcme.bin...addr = 0xb6d3b000, size = 0x36374
loading /lib/firmware/default_binary.bin...addr = 0xb6ddb000, size = 0x40000
===============================
u_code version = 2013/7/19 3.0
===============================
[01/Jan/1970:00:00:39 +0000] boa: server version Boa/0.94.13
[01/Jan/1970:00:00:39 +0000] boa: server built Jan 14 2015 at 12:09:03.
[01/Jan/1970:00:00:39 +0000] boa: starting server pid=102, port 80
# [rtsp]: Z.num[4]init_data.max_stream_num[4],size[4194304][1048576][1048576][1048576]
[rtsp]: ==> bsreader.c bsreader_open():MAX STREAM [4]

[rtsp]: ==> bsreader.c init_iav():
[rtsp]: <== bsreader.c init_iav():
[rtsp]: bsreader_open():line[494]
MAX item num[8]
[rtsp]: bsreader_dispatcher_thread_func():line[332]
->enter bsreader dispatcher main loop
Play this stream using the URL "rtsp://192.168.10.49/stream1"
Play this stream using the URL "rtsp://192.168.10.49/stream2"
Play this stream using the URL "rtsp://192.168.10.49/stream3"
Play this stream using the URL "rtsp://192.168.10.49/stream4"
[INFO] map_size = 0x00300000 
[INFO] nr_item = 3
[INFO] addr_offset = 0x00000000 [INFO] filename = orccode.bin
[INFO] addr_offset = 0x00200000 [INFO] filename = orcme.bin
[INFO] addr_offset = 0x002A0000 [INFO] filename = default_binary.bin
[INFO] mmap returns 0xb68fc000
[INFO] loading /lib/firmware/orccode.bin...[INFO] addr = 0xb68fc000, size = 0x19e696
[INFO] loading /lib/firmware/orcme.bin...[INFO] addr = 0xb6afc000, size = 0x36374
[INFO] loading /lib/firmware/default_binary.bin...[INFO] addr = 0xb6b9c000, size = 0x40000
[INFO] ===============================
[INFO] ucode version = 2013/7/19 3.0
[INFO] ===============================
[INFO] ucode version: 3.0
[INFO] Initialize VIN DONE.
[INFO] Initialize VOUT DONE.
[INFO] Initialize VENC DONE.
[INFO] gadi:ptz thread create OK
******************************
PTZ PROTOCOL SUPPROT:
pelco-d
******************************
[INFO] gadi_vin_open:[mode:65528][1920x1080][frameRate:17083750][source devType:1].
resoluMode:0,frameRate:17083750,mirrorPattern:0,bayerPattern:4,resoluMode:65520,sinkType:1
dptz:0,streamFormat.streamId:0,encodeType:1,width:1920,height:1080,Fps:17066667,flipRotate:0,h264Conf.streamId:0,gopModel:0,gopM:1,gopN:30
idrInterval:1,profilVout info: CVBS-0 switch to mode 65520!
e:0,brcMode:0,cbrAvgBps:4000000,vbrMinbps:1000000,vbrMaxbps:4000000,mjpegConf.streamId:1,quality:5,chromaFormat:0
dptz:0,streamFormat.streamId:1,encodeType:1,width:720,height:480,Fps:20480000,flipRotate:0,h264Conf.streamId:1,gopModel:0,gopM:1,gopN:30
idrInterval:1,profile:0,brcMode:0,cbrAvgBps:4000000,vbrMinbps:1000000,vbrMaxbps:4000000,mjpegConf.streamId:1,quality:5,chromaFormat:0
dptz:0,streamFormat.streamId:2,encodeType:0,width:0,height:0,Fps:0,flipRotate:0,h264Conf.streamId:2,gopModel:0,gopM:1,gopN:30
idrInterval:1,profile:0,brcMode:0,cbrAvgBps:4000000,vbrMinbps:1000000,vbrMaxbps:4000000,mjpegConf.streamId:2,quality:5,chromaFormat:0
dptz:0,streamFormat.streamId:3,encodeType:0,width:0,height:0,Fps:0,flipRotate:0,h264Conf.streamId:3,gopModel:0,gopM:1,gopN:30
idrInterval:1,profile:0,brcMode:0,cbrAvgBps:4000000,vbrMinbps:1000000,vbrMaxbps:4000000,mjpegConf.streamId:3,quality:5,chromaFormat:0
protocolName:pelco-d,addr:1
devName:GOKE-PTZ,presetsCapacity:32
[INFO] gadi_vin_enter_preview:iav device state=0
[INFO] sink 3 is HDMI
[INFO] sink 2 is DBus-LCD
[INFO] sink 1 is DBus-All
[INFO] sink 0 is CVBS
[INFO] vout_get_sink_id: 1 1, return 0
Vin info: amba_vin_vsync_bind to idsp with 0ns delay!
Vin info: amba_vin_vsync_bind to idsp with 0ns delay!
resolution order of streams : 0, 1, 2, 3, 
[INFO] change frame rate factor : 60/60.
[INFO] change frame rate factor : 50/60.
start stream[0]
[INFO] DPTZ Type I : zoom_factor_x 0x10000, zoom_factor_y 0x10000, offset_x 0x0, offset_y 0x0.
[INFO] Start encoding for stream 0x0.		Active encoding num is 1.
start stream[1]
[INFO] DPTZ Type II : source 1, input window 1620x1080, offset 150x0.
[INFO] Start encoding for stream 0x1.		Active encoding num is 2.
[INFO] isp: -------------------------------------------------------
[INFO] isp: video info listed
[INFO] isp: width  1920
[INFO] isp: height 1080
[INFO] isp: fps 17083750
[INFO] isp: format 2
[INFO] isp: type 5
[INFO] isp: bits 10
[INFO] isp: -------------------------------------------------------
[INFO] isp:img_lib_init done
[INFO] isp: sensor id[0x00000001] name[ov2710] def_fps[17083750] cur_fps[17083750] op_mode[0]
[INFO] isp: load cc table done
 shm addr = 0xb59f4000  0
[INFO] isp: start aaa done
[INFO] isp: enable AE done
[INFO]    saturation = 64.
[INFO]    brightness = 0.
[INFO]           hue = 0.
[INFO]      contrast = 64.
[INFO]     sharpness = 128.
[INFO]  mctfStrength = 1.
[INFO]  localExpMode = 1.
[INFO]      expLevel = 100.
[INFO]       awbMode = 0.
[onvif_process] port [18000] is waiting for being connected...
[webservice] create_server():line[2388]:
-----[Done] Create web_service-----
[webservice] ===> main_loop()
[webservice] connect_server():line[2309]:
-----Listen to 20000-----
Waiting for connection!