diff --git "a/25 \351\231\210\346\201\255\347\204\225/20250425 DHCP(DHCP\346\234\215\345\212\241\345\231\250).pkt.md" "b/25 \351\231\210\346\201\255\347\204\225/20250425 DHCP(DHCP\346\234\215\345\212\241\345\231\250).pkt.md"
new file mode 100644
index 0000000000000000000000000000000000000000..0416b95b0bf6530840651e5b27b320dfec76af23
--- /dev/null
+++ "b/25 \351\231\210\346\201\255\347\204\225/20250425 DHCP(DHCP\346\234\215\345\212\241\345\231\250).pkt.md"	
@@ -0,0 +1,85 @@
+```
+Router>en
+
+Router#confi t
+
+Router(config)#interface g0/0
+
+Router(config-if)#no shutdown 
+
+Router(config-if)#ip add 192.168.10.254 255.255.255.0
+
+Router(config-if)#ex
+
+Router(config)#ip dhcp pool Xiaozhu(自定义名字)
+
+Router(dhcp-config)#network 192.168.10.0 255.255.255.0 //主机网段
+
+Router(dhcp-config)#default-router 192.168.10.254 //主机网关
+
+Router(dhcp-config)#dns-server 8.8.8.8   //主机DNS
+```
+
+### [20250425 DHCP(DHCP服务器).pkt](pkt文件夹\20250425 DHCP(动态主机配置协议).pkt)
+
+![image-20250425162242601](https://gitee.com/bathing-emperor/the-bathing-emperors-bed/raw/master/img/upgit_20250425_1745569362.png)
+
+### 配置DHCP服务器
+
+![image-20250425162528915](https://gitee.com/bathing-emperor/the-bathing-emperors-bed/raw/master/img/upgit_20250425_1745569529.png)
+
+**在 DHCP 服务器上创建两个作用域**
+
+- 作用域 1
+
+  ：
+
+  - 名称(Pool Name)：`Subnet-192.168.10.0` **可以自定义**
+  - IP 范围：`192.168.10.10 - 192.168.10.200` **主机号从10开始分配，两百结束**
+  - 子网掩码(Subent Mask)：`255.255.255.0`
+  - 网关(Default Gateway)：`192.168.10.254` **10.0这个网段，主机的网关**
+
+- 作用域 2
+
+  ：
+
+  - 名称：`Subnet-192.168.20.0`
+  - IP 范围：`192.168.20.10 - 192.168.20.200`
+  - 子网掩码：`255.255.255.0`
+  - 网关：`192.168.20.254`
+
+#### 注：DHCP服务器默认是Off(关闭)，记得打开(On)
+
+### 路由器配置
+
+```
+Router>en
+
+Router#confi t
+
+Router(config)#interface g0/2
+
+Router(config-if)#ip address 3.3.3.1 255.255.255.0
+
+Router(config-if)#no shutdown 
+
+Router(config-if)#ex
+
+Router(config)#interface g0/1
+
+Router(config-if)#no shutdown 
+
+Router(config-if)#ip add 192.168.10.254 255.255.255.0
+
+Router(config-if)#ip helper-address 3.3.3.2
+
+Router(config-if)#ex
+
+Router(config)#interface g0/0
+
+Router(config-if)#no shutdown 
+
+Router(config-if)#ip add 192.168.20.254 255.255.255.0
+
+Router(config-if)#ip helper-address 3.3.3.2
+```
\ No newline at end of file