diff --git a/scripts/00bootup/Global.cfg b/scripts/00bootup/Global.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..cad4e33cb70c1cfe0ca9be9d42ba828b2f67ff07
--- /dev/null
+++ b/scripts/00bootup/Global.cfg
@@ -0,0 +1,12 @@
+# rootfs file name
+rootfs_name=kubeos.tar
+
+# select the target disk to install kubeOS
+disk=/dev/sda
+
+# address where stores the rootfs on the http server
+server_ip=192.168.1.50
+
+local_ip=192.168.1.100
+
+route_ip=192.168.1.1
\ No newline at end of file
diff --git a/scripts/00bootup/module-setup.sh b/scripts/00bootup/module-setup.sh
new file mode 100644
index 0000000000000000000000000000000000000000..5460b2bcd0075a90d33fbfcd01d6210e49c91333
--- /dev/null
+++ b/scripts/00bootup/module-setup.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+check() {
+    return 0
+}
+
+depends() {
+    echo systemd
+}
+
+install() {
+    inst_multiple -o grub2-mkimage mkfs.ext4 mkfs.vfat lsblk tar cpio gunzip lspci parted dhclient ifconfig curl hwinfo head tee arch df awk route 
+    inst_hook mount 00 "$moddir/mount.sh"
+    inst_simple "$moddir/mount.sh" "/mount.sh"
+    inst_simple "$moddir/Global.cfg" "/Global.cfg"
+}
+
+installkernel() {
+    hostonly='' \
+        instmods \
+        =drivers/ata \
+        =drivers/nvme \
+        =drivers/scsi \
+        =drivers/net \
+        =fs/fat \
+        =fs/nls
+}
+  
diff --git a/scripts/00bootup/mount.sh b/scripts/00bootup/mount.sh
new file mode 100644
index 0000000000000000000000000000000000000000..a04a364f70d5957f9c3ee068cf7e08df1511ae17
--- /dev/null
+++ b/scripts/00bootup/mount.sh
@@ -0,0 +1,332 @@
+#!/bin/bash
+arch=$(arch)
+min_size=8
+log=/install.log
+
+source /Global.cfg
+
+function CheckSpace() {
+    local disk_ava="$(parted -l | grep ${disk} | awk '{print $3}')"
+    if echo "${disk_ava}" | grep [GT]B$; then
+        if echo "${disk_ava}" | grep GB$; then
+            disk_ava="$(echo ${disk_ava} | awk -F G '{print $1}' | awk -F . '{print $1}')"
+            if [ "${disk_ava}" -lt ${min_size} ]; then
+                echo "The available disk space is not enough, at least ${min_size}GB." | tee -a ${log}
+                return 1
+            fi
+        fi
+    else
+        echo "The available disk space is not enough, at least ${min_size}G." | tee -a ${log}
+        return 1
+    fi
+
+    return 0
+}
+
+function GetDisk() {
+    disks=$(hwinfo --disk --short | grep -vi "^disk" | awk '{print $1}')
+    if [ ! -z ${disks} ]; then
+        if [ ! -z ${disk} ] && echo "${disks[@]}" | grep -wq "${disk}" ; then
+            echo "${disk} exists, start partition"  | tee -a ${log}
+        else
+            echo "disk not exist, choose default disk"  | tee -a ${log}
+            disk=$(echo ${disks[0]})
+        fi
+    else
+        echo "no disk found" | tee -a ${log}
+        return 1
+    fi
+    
+
+    CheckSpace
+    if [ $? -ne 0 ]; then
+        echo "no enough space on ${disk}" | tee -a ${log}
+        return 1
+    fi
+
+    return 0
+}
+
+function PartitionAndFormatting() {
+    echo "Partitioning and formatting disk $disk..."
+    # partition and format
+    parted ${disk} -s mklabel gpt >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    parted ${disk} -s mkpart primary fat16 1M 100M >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    parted ${disk} -s mkpart primary ext4 100M 2600M >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    parted ${disk} -s mkpart primary ext4 2600M 5100M >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    parted ${disk} -s mkpart primary ext4 5100M 100% >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    parted ${disk} -s set 1 boot on >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "partition failed" | tee -a ${log}
+        return 1
+    fi
+
+    mkfs.vfat -n "BOOT" ${disk}1 >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "format failed" | tee -a ${log}
+        return 1
+    fi
+
+    mkfs.ext4 -L "ROOT-A" ${disk}2 >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "format failed" | tee -a ${log}
+        return 1
+    fi
+
+    mkfs.ext4 -L "ROOT-B" ${disk}3 >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "format failed" | tee -a ${log}
+        return 1
+    fi
+
+    mkfs.ext4 -L "PERSIST" ${disk}4 >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "format failed" | tee -a ${log}
+        return 1
+    fi
+
+    return 0
+}
+
+function InitNetwork() {
+    echo "Initializing network..."
+    # 获取网卡信息，默认只有一个网卡
+    net_name=`ifconfig -a | awk '{print $1}' | grep : | grep '^e' | awk -F: '{print $1}'`
+    # dhclient --timeout 60 >> ${log} 2>&1
+
+    ifconfig ${net_name} up
+    if [ $? -ne 0 ]; then
+        echo "load net card failed" | tee -a ${log}
+        return 1
+    fi
+    sleep 3
+
+    ifconfig ${net_name} ${local_ip} netmask 255.255.255.0  >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "ip set failed" | tee -a ${log}
+        return 1
+    fi
+    sleep 3
+
+    route add default gw ${route_ip} >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "add route failed" | tee -a ${log}
+        return 1
+    fi
+    sleep 3
+
+    
+
+    return 0
+}
+
+function MountRoot() {
+    echo "Mounting rootfs..."
+    # mount rootfs
+    mount ${disk}2 /sysroot >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "mount rootfs failed" | tee -a ${log}
+        return 1
+    fi
+
+    return 0
+}
+
+function MountPersist() {
+    echo "Mounting persist"
+    mkdir /persist
+    mount ${disk}4 /persist >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "mount persist failed" | tee -a ${log}
+        return 1
+    fi
+    mkdir /persist/{var,etc,etcwork}
+    mkdir -p /persist/etc/KubeOS/certs
+    return 0
+}
+
+function MountBoot() {
+    echo "Mounting boot"
+    mkdir -p /sysroot/boot/efi
+    mount ${disk}1 /sysroot/boot/efi >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "mount boot failed" | tee -a ${log}
+        return 1
+    fi
+    return 0
+}
+
+function GetRootfs() {
+    echo "Downloading rootfs..."
+
+    curl -o /persist/${rootfs_name} http://${server_ip}/${rootfs_name}
+    if [ ! -e "/persist/${rootfs_name}" ]; then
+        echo "download rootfs failed" | tee -a ${log}
+        return 1
+    fi
+
+    tar -xvf /persist/${rootfs_name} -C /sysroot
+    if [ $? -ne 0 ]; then
+        echo "decompose rootfs failed" | tee -a ${log}
+        return 1
+    fi
+
+    rm -rf /persist/${rootfs_name}
+
+    return 0
+}
+
+function Inst_Grub2_x86() {
+    # copy the files that boot need
+    cp -r /sysroot/usr/lib/grub/x86_64-efi /sysroot/boot/efi/EFI/openEuler
+    eval "grub2-mkimage -d /sysroot/usr/lib/grub/x86_64-efi -O x86_64-efi --output=/sysroot/boot/efi/EFI/openEuler/grubx64.efi '--prefix=(,gpt1)/EFI/openEuler' fat part_gpt part_msdos linux"  >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "grub2-mkimage on x86 failed" | tee -a ${log}
+        return 1
+    fi
+    
+    mkdir -p /sysroot/boot/efi/EFI/BOOT/
+    cp -f /sysroot/boot/efi/EFI/openEuler/grubx64.efi /sysroot/boot/efi/EFI/BOOT/BOOTX64.EFI
+
+    return 0
+}
+
+function Inst_Grub2_aarch64() {
+    cp -r /sysroot/usr/lib/grub/arm64-efi /sysroot/boot/efi/EFI/openEuler/
+    eval "grub2-mkimage -d /sysroot/usr/lib/grub/arm64-efi -O arm64-efi --output=/sysroot/boot/efi/EFI/openEuler/grubaa64.efi '--prefix=(,gpt1)/EFI/openEuler' fat part_gpt part_msdos linux"  >> ${log} 2>&1
+    if [ $? -ne 0 ]; then
+        echo "grub2-mkimage on aarch64 failed" | tee -a ${log}
+        return 1
+    fi
+    
+    mkdir -p /sysroot/boot/efi/EFI/BOOT/
+    cp -f /sysroot/boot/efi/EFI/openEuler/grubaa64.efi /sysroot/boot/efi/EFI/BOOT/BOOTAA64.EFI
+
+    return 0
+}
+
+function SetBoot() {
+    # mount boot
+    echo "Setting boot"
+
+    if [ $arch == "x86_64" ];   then
+        Inst_Grub2_x86
+        if [ $? -ne 0 ]; then
+            echo "install grub on x86 failed" | tee -a ${log}
+            return 1
+        fi
+    fi
+
+    if [ $arch == "aarch64" ]; then
+        Inst_Grub2_aarch64
+        if [ $? -ne 0 ]; then
+            echo "install grub on aarch64 failed" | tee -a ${log}
+            return 1
+        fi
+    fi
+
+    return 0
+}
+
+function Bootup_Main() {
+    # get disk
+    echo "Checking disk info..." | tee -a ${log}
+    GetDisk
+    if [ $? -ne 0 ]; then
+        echo "Checking disk info failed" | tee -a ${log}
+        return 1
+    fi
+
+    # partition and format disk
+    echo "Partion and formatting..." | tee -a ${log}
+    PartitionAndFormatting
+    if [ $? -ne 0 ]; then
+        echo "Partition and formatting disk failed" | tee -a ${log}
+        return 1
+    fi
+
+    # init network
+    echo "Initializing network..." | tee -a ${log}
+    InitNetwork
+    if [ $? -ne 0 ]; then
+        echo "Initializing network failed" | tee -a ${log}
+        return 1
+    fi
+
+    # mount partitions
+    echo "Mounting root..." | tee -a ${log}
+    MountRoot
+    if [ $? -ne 0 ]; then
+        echo "Mounting root failed" | tee -a ${log}
+        return 1
+    fi
+
+    # mount persist
+    echo "Mounting persisst..." | tee -a ${log}
+    MountPersist
+    if [ $? -ne 0 ]; then
+        echo "Mounting persist failed" | tee -a ${log}
+        return 1
+    fi
+
+    # mount boot
+    echo "Mounting boot..." | tee -a ${log}
+    MountBoot
+    if [ $? -ne 0 ]; then
+        echo "Mounting boot failed" | tee -a ${log}
+        return 1
+    fi
+
+    # download rootfs
+    echo "Downloading rootfs..." | tee -a ${log}
+    GetRootfs
+    if [ $? -ne 0 ]; then
+        echo "Downloading rootfs failed" | tee -a ${log}
+        return 1
+    fi
+
+    # set boot
+    echo "Setting boot..." | tee -a ${log}
+    SetBoot
+    if [ $? -ne 0 ]; then
+        echo "Setting boot failed" | tee -a ${log}
+        return 1
+    fi
+
+    return 0
+}
+
+Bootup_Main
+ret=$?
+if [ ${ret} -eq 0 ]; then
+    echo "kubeOS install success! switch to root" | tee -a ${log}
+    cp ${log} /persist
+else
+    echo "kubeOS install failed, see install.log" | tee -a ${log}
+fi
+
diff --git a/scripts/create/imageCreate.sh b/scripts/create/imageCreate.sh
index f8dafbe08635afdea352f79aee8a0391f51f539c..95ebcde88543e2227b321027bcd2fd3cc5461e39 100644
--- a/scripts/create/imageCreate.sh
+++ b/scripts/create/imageCreate.sh
@@ -62,12 +62,12 @@ function create_pxe_img() {
   case $opt in
   "repo")
     create_os_tar_from_repo "$@"
-    tar -xvf os.tar  ./boot/initramfs.img
+    tar -xvf os.tar  ./initramfs.img
     tar -xvf os.tar  ./boot/vmlinuz
     ;;
   "docker")
     create_os_tar_from_docker "$@"
-    tar -xvf os.tar  boot/initramfs.img
+    tar -xvf os.tar  initramfs.img
     tar -xvf os.tar  boot/vmlinuz
     ;;
   esac
diff --git a/scripts/create/rootfsCreate.sh b/scripts/create/rootfsCreate.sh
index 8049f09349e7bba10b4b087dbdc19acab78e72d2..e5c53d532bd5fb1b34858a18d65b32d9726d89dd 100644
--- a/scripts/create/rootfsCreate.sh
+++ b/scripts/create/rootfsCreate.sh
@@ -61,6 +61,7 @@ EOF
         mv "${RPM_ROOT}"/boot/initramfs* "${RPM_ROOT}/boot/initramfs.img"
         cp grub.cfg "${RPM_ROOT}"/boot/grub2
         cp grub.cfg "${RPM_ROOT}"/boot/efi/EFI/openEuler
+	cp -r ./00bootup ${RPM_ROOT}/usr/lib/dracut/modules.d/ 
         cp set_in_chroot.sh "${RPM_ROOT}"
         ROOT_PWD="${PASSWD}" chroot "${RPM_ROOT}" bash /set_in_chroot.sh
         rm "${RPM_ROOT}/set_in_chroot.sh"
diff --git a/scripts/rpmlist b/scripts/rpmlist
index 7a9adfacdd7bd2eb155b2e1eb658dd0eb505662f..077a1642cfb119bcc9512a29722f149263a9cfd6 100644
--- a/scripts/rpmlist
+++ b/scripts/rpmlist
@@ -13,4 +13,12 @@ socat
 conntrack-tools
 ebtables
 ethtool
-rsyslog
\ No newline at end of file
+rsyslog
+vi
+net-tools
+hwinfo
+dracut
+coreutils
+gawk
+parted
+dosfstools
\ No newline at end of file
diff --git a/scripts/set_in_chroot.sh b/scripts/set_in_chroot.sh
index bacef789c4b9972cf8a938c9c4d4875cd99187da..4b061df6a7e773c4223524ca1ba1e8d35cfcff66 100644
--- a/scripts/set_in_chroot.sh
+++ b/scripts/set_in_chroot.sh
@@ -11,3 +11,6 @@ sed -i '/^root:/d' /etc/shadow_bak
 echo "root:"${ROOT_PWD}${str:1} > /etc/shadow
 cat /etc/shadow_bak >> /etc/shadow
 rm -rf /etc/shadow_bak
+
+dracut -f -v --add bootup /initramfs.img --kver `ls /lib/modules`
+rm -rf /usr/lib/dracut/modules.d/00bootup
\ No newline at end of file