From 32544c5a8fe2e8b9daaf9abdd6da02efb7c221b1 Mon Sep 17 00:00:00 2001 From: Rover Wang <1308533838@qq.com> Date: Fri, 21 Mar 2025 09:53:53 +0000 Subject: [PATCH] update docs/en/docs/Virtualization/environment-preparation.md. Signed-off-by: Rover Wang <1308533838@qq.com> --- docs/en/docs/Virtualization/environment-preparation.md | 3 +++ 1 file changed, 3 insertions(+) diff --git a/docs/en/docs/Virtualization/environment-preparation.md b/docs/en/docs/Virtualization/environment-preparation.md index b9c39a089..93d59930c 100644 --- a/docs/en/docs/Virtualization/environment-preparation.md +++ b/docs/en/docs/Virtualization/environment-preparation.md @@ -245,6 +245,9 @@ The following describes how to set up an Open vSwitch layer-1 bridge br0. ``` 4. Assign an IP address to OVS bridge br0. + > ![](./public_sys-resources/icon-note.gif) **illustrateļ¼š** + > + > If you use DHCP to set a dynamic IP address for br0, you need to clear the existing dynamic IP address. Run the dhclient -r command to clear the possible dynamic IP addresses. - If a DHCP server is available, set a dynamic IP address through the dhclient. ```shell -- Gitee