diff --git a/ManufacturingSimulation/README.md b/ManufacturingSimulation/README.md
index 5af54dd64497e519fc329ad2f4c9c15a3f2e9542..4c8f7179edd144e05704d9ef59b11dcf5d484821 100644
--- a/ManufacturingSimulation/README.md
+++ b/ManufacturingSimulation/README.md
@@ -1,2 +1,2 @@
 Manufacturing Simulation Software List:
-- repositories: xxx
+- repositories: SU2-6.0.1
diff --git a/ManufacturingSimulation/SU2-6.0.1/build.sh b/ManufacturingSimulation/SU2-6.0.1/build.sh
new file mode 100644
index 0000000000000000000000000000000000000000..ed86a1f398d411325bc63786572535228990eaa4
--- /dev/null
+++ b/ManufacturingSimulation/SU2-6.0.1/build.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+if [[ $# -ne 2 ]]; then
+    echo "The format is as follows:"
+    echo "bash build.sh buildpath installpath"
+    echo ":param buildpath: 应用构建绝对路径"
+    echo ":param installpath: 应用安装绝对路径"
+    exit 1
+fi
+
+[[ ! "$1" =~ ^/.* || "$1" = "/" ]] &&  echo "请输入正确的构建路径" && exit 1
+[[ ! "$2" =~ ^/.* || "$2" = "/" ]] &&  echo "请输入正确的安装路径" && exit 1
+
+create_dir()
+{
+    local path=$1
+    [[ "$path" =~ .*/$ ]] && path=${path%/*}
+    if [[ ! -d "$path" && ! -f "$path" ]]; then mkdir -p $path; else path=$path`date "+%y%m%d%H%M%S"` && mkdir -p $path; fi
+    echo $path
+}
+
+buildpath=$(create_dir $1)
+installpath=$(create_dir $2)
+
+yum install -y m4 environment-modules systemd-devel
+source /etc/profile
+module purge
+
+set -e
+dep_dir="dependency"
+bash $dep_dir/bisheng-compiler-2.1.0.sh $buildpath $installpath
+module use $installpath/bisheng-compiler-2.1.0
+module load $installpath/bisheng-compiler-2.1.0/bisheng_modulefiles
+
+bash $dep_dir/hmpi-1.1.1.sh $buildpath $installpath
+module use $installpath/hmpi-1.1.1
+module load $installpath/hmpi-1.1.1/hmpi_modulefiles
+
+bash $dep_dir/hdf5-1.12.1.sh $buildpath $installpath
+module use $installpath/hdf5-1.12.1
+module load $installpath/hdf5-1.12.1/hdf5_modulefiles
+
+bash su2-6.0.1.sh $buildpath $installpath
+
+mkdir -p pkg/su2-6.0.1-hpc && cp -r $installpath/* pkg/su2-6.0.1-hpc/
+cat>"pkg/su2-6.0.1-hpc/run.sh"<<EOF
+#!/bin/bash
+yum install -y m4 environment-modules systemd-devel csh time patch libatomic perl-Data-Dumper \\
+autoconf automake libtool numactl binutils valgrind flex wget tar libatomic gcc-c++ git \\
+python2-numpy.aarch64
+source /etc/profile &> /dev/null
+current_dir=\$(cd "\$(dirname "\${BASH_SOURCE[0]}")" &> /dev/null && pwd)
+for d in \$(ls \$current_dir)
+do
+    [[ ! -f "\$current_dir/\$d" ]] && cd \$current_dir/\$d && module use \$(pwd) && module load \$(pwd)/*modulefiles
+done
+cd \$current_dir
+[[ ! -d "$installpath/hmpi-1.1.1" ]] && mkdir -p $installpath/hmpi-1.1.1 && cp -r \$current_dir/hmpi-1.1.1/* $installpath/hmpi-1.1.1/
+EOF
+cd pkg/ && tar zcvf su2-6.0.1-hpc.tar.gz su2-6.0.1-hpc
+
+rm -rf $buildpath $installpath
+
+
+
+
diff --git a/ManufacturingSimulation/SU2-6.0.1/dependency/bisheng-compiler-2.1.0.sh b/ManufacturingSimulation/SU2-6.0.1/dependency/bisheng-compiler-2.1.0.sh
new file mode 100644
index 0000000000000000000000000000000000000000..a53069995751e081370ff3e2559fbc3b2dfd3f4c
--- /dev/null
+++ b/ManufacturingSimulation/SU2-6.0.1/dependency/bisheng-compiler-2.1.0.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+
+if [[ $# -ne 2 ]]; then
+    echo "The format is as follows:"
+    echo "bash bisheng-compiler-2.1.0.sh buildpath installpath"
+    echo ":param buildpath: 应用构建绝对路径"
+    echo ":param installpath: 应用安装绝对路径"
+    exit 1
+fi
+
+[[ ! "$1" =~ ^/.* || ! -d "$1" || "$1" = "/" ]] &&  echo "请输入正确的构建路径" && exit 1
+[[ ! "$2" =~ ^/.* || ! -d "$2" || "$2" = "/" ]] &&  echo "请输入正确的安装路径" && exit 1
+
+buildpath=$1
+installpath=$2
+[[ "$buildpath" =~ .*/$ ]] && buildpath=${buildpath%/*}
+[[ "$installpath" =~ .*/$ ]] && installpath=${installpath%/*}
+[[ "$buildpath" == "$installpath" ]] && echo "构建路径与安装路径需为不同路径" && exit 1
+set -e
+yum install -y wget tar environment-modules libatomic
+
+wget -t 0 -c -P $buildpath https://mirrors.huaweicloud.com/kunpeng/archive/compiler/bisheng_compiler/bisheng-compiler-2.1.0-aarch64-linux.tar.gz
+tar xf $buildpath/bisheng-compiler-2.1.0-aarch64-linux.tar.gz -C $buildpath && rm -rf $buildpath/bisheng-compiler-2.1.0-aarch64-linux.tar.gz
+mkdir -p $installpath/bisheng-compiler-2.1.0 && cp -r $buildpath/bisheng-compiler-2.1.0-aarch64-linux/* $installpath/bisheng-compiler-2.1.0/
+
+cat>"$installpath/bisheng-compiler-2.1.0/bisheng_modulefiles"<<EOF
+#%Module1.0
+conflict bisheng
+variable modfile [file normalize [info script]]
+proc getModulefileDir {} {
+    variable modfile
+    set modfile_path [file dirname \$modfile]
+    return \$modfile_path
+}
+set pwd [getModulefileDir]
+set BISHENG \$pwd
+setenv BISHENG \$BISHENG
+prepend-path PATH \$BISHENG/bin
+prepend-path LD_LIBRARY_PATH \$BISHENG/lib
+EOF
+
+rm -rf $buildpath/bisheng-compiler-2.1.0-aarch64-linux
+
diff --git a/ManufacturingSimulation/SU2-6.0.1/dependency/hdf5-1.12.1.sh b/ManufacturingSimulation/SU2-6.0.1/dependency/hdf5-1.12.1.sh
new file mode 100644
index 0000000000000000000000000000000000000000..2f10dc7063ead6f24111f18e18a6fa669c02710d
--- /dev/null
+++ b/ManufacturingSimulation/SU2-6.0.1/dependency/hdf5-1.12.1.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+if [[ $# -ne 2 ]]; then
+    echo "The format is as follows:"
+    echo "bash hdf5-1.12.1.sh buildpath installpath"
+    echo ":param buildpath: 应用构建绝对路径"
+    echo ":param installpath: 应用安装绝对路径"
+    exit 1
+fi
+
+[[ ! "$1" =~ ^/.* || ! -d "$1" || "$1" = "/" ]] &&  echo "请输入正确的构建路径" && exit 1
+[[ ! "$2" =~ ^/.* || ! -d "$2" || "$2" = "/" ]] &&  echo "请输入正确的安装路径" && exit 1
+
+buildpath=$1
+installpath=$2
+[[ "$buildpath" =~ .*/$ ]] && buildpath=${buildpath%/*}
+[[ "$installpath" =~ .*/$ ]] && installpath=${installpath%/*}
+[[ "$buildpath" == "$installpath" ]] && echo "构建路径与安装路径需为不同路径" && exit 1
+set -e
+yum install -y wget tar environment-modules
+
+wget -t 0 -c -P $buildpath https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.12/hdf5-1.12.1/src/hdf5-1.12.1.tar.gz
+tar xf $buildpath/hdf5-1.12.1.tar.gz -C $buildpath && rm -rf $buildpath/hdf5-1.12.1.tar.gz
+cd $buildpath/hdf5-1.12.1
+CC=mpicc CXX=mpicxx FC=mpifort F77=mpi77 CFLAGS="-fPIC -DPIC" FCFLAGS="-fPIC -DPIC" FFLAGS="-fPIC" \
+./configure --prefix=$installpath/hdf5-1.12.1 --with-zlib=$installpath/zlib-1.2.11 --enable-shared --enable-fortran --enable-static --enable-parallel
+sed -i 's@\\\$wl-soname@-install_name@g' libtool
+make -j$(nproc) && make -j$(nproc) install
+cat>"$installpath/hdf5-1.12.1/hdf5_modulefiles"<<EOF
+#%Module1.0
+conflict hdf5
+variable modfile [file normalize [info script]]
+proc getModulefileDir {} {
+    variable modfile
+    set modfile_path [file dirname \$modfile]
+    return \$modfile_path
+}
+set pwd [getModulefileDir]
+set HDF5 \$pwd
+setenv HDF5 \$HDF5
+prepend-path PATH \$HDF5/bin
+prepend-path LD_LIBRARY_PATH \$HDF5/lib
+EOF
+
+rm -rf $buildpath/hdf5-1.12.1
+
diff --git a/ManufacturingSimulation/SU2-6.0.1/dependency/hmpi-1.1.1.sh b/ManufacturingSimulation/SU2-6.0.1/dependency/hmpi-1.1.1.sh
new file mode 100644
index 0000000000000000000000000000000000000000..667f3deff14f91e46a38f9ac7c51f75c8900da08
--- /dev/null
+++ b/ManufacturingSimulation/SU2-6.0.1/dependency/hmpi-1.1.1.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+
+if [[ $# -ne 2 ]]; then
+    echo "The format is as follows:"
+    echo "bash hmpi-1.1.1.sh buildpath installpath"
+    echo ":param buildpath: 应用构建绝对路径"
+    echo ":param installpath: 应用安装绝对路径"
+    exit 1
+fi
+
+[[ ! "$1" =~ ^/.* || ! -d "$1" || "$1" = "/" ]] &&  echo "请输入正确的构建路径" && exit 1
+[[ ! "$2" =~ ^/.* || ! -d "$2" || "$2" = "/" ]] &&  echo "请输入正确的安装路径" && exit 1
+
+buildpath=$1
+installpath=$2
+[[ "$buildpath" =~ .*/$ ]] && buildpath=${buildpath%/*}
+[[ "$installpath" =~ .*/$ ]] && installpath=${installpath%/*}
+[[ "$buildpath" == "$installpath" ]] && echo "构建路径与安装路径需为不同路径" && exit 1
+set -e
+yum install -y wget tar perl-Data-Dumper autoconf automake libtool numactl binutils systemd-devel valgrind flex environment-modules gcc-c++ git
+
+download_pkg()
+{
+    wget -t 0 -c -P $buildpath $1
+    tar xf $buildpath/v1.1.1-huawei.tar.gz -C $buildpath
+    rm -rf $buildpath/v1.1.1-huawei.tar.gz
+}
+
+download_pkg https://github.com/kunpengcompute/hmpi/archive/refs/tags/v1.1.1-huawei.tar.gz
+download_pkg https://github.com/kunpengcompute/hucx/archive/refs/tags/v1.1.1-huawei.tar.gz
+download_pkg https://github.com/kunpengcompute/xucg/archive/refs/tags/v1.1.1-huawei.tar.gz
+cp -r $buildpath/xucg-1.1.1-huawei/* $buildpath/hucx-1.1.1-huawei/src/ucg/
+cd $buildpath/hucx-1.1.1-huawei
+git init && ./autogen.sh
+./contrib/configure-opt --prefix=$installpath/hmpi-1.1.1/hucx-1.1.1-huawei --disable-numa CC=clang CXX=clang++ FC=flang
+for file in `find . -name Makefile`;do sed -i "s/-Werror//g" $file;done
+for file in `find . -name Makefile`;do sed -i "s/-implicit-function-declaration//g" $file;done
+make -j$(nproc)
+make -j$(nproc) install
+export PATH=$installpath/hmpi-1.1.1/hucx-1.1.1-huawei/bin:$PATH
+export LD_LIBRARY_PATH=$installpath/hmpi-1.1.1/hucx-1.1.1-huawei/lib:$LD_LIBRARY_PATH
+export INCLUDE=$installpath/hmpi-1.1.1/hucx-1.1.1-huawei/include:$INCLUDE
+cd $buildpath/hmpi-1.1.1-huawei
+./autogen.pl CC=clang CXX=clang++ FC=flang
+./configure --prefix=$installpath/hmpi-1.1.1/hmpi-1.1.1-huawei --with-platform=contrib/platform/mellanox/optimized --enable-mpil-compatibility \
+	--with-ucx=$installpath/hmpi-1.1.1/hucx-1.1.1-huawei CC=clang CXX=clang++ FC=flang
+make -j$(nproc)
+make -j$(nproc) install
+cat>"$installpath/hmpi-1.1.1/hmpi_modulefiles"<<EOF
+#%Module1.0
+conflict hmpi
+variable modfile [file normalize [info script]]
+proc getModulefileDir {} {
+    variable modfile
+    set modfile_path [file dirname \$modfile]
+    return \$modfile_path
+}
+set pwd [getModulefileDir]
+set HUCX \$pwd/hucx-1.1.1-huawei
+setenv HUCX \$HUCX
+prepend-path PATH \$HUCX/bin
+prepend-path LD_LIBRARY_PATH \$HUCX/lib
+prepend-path INCLUDE \$HUCX/include
+set HMPI \$pwd/hmpi-1.1.1-huawei
+setenv HMPI \$HMPI
+prepend-path PATH \$HMPI/bin
+prepend-path LD_LIBRARY_PATH \$HMPI/lib
+prepend-path INCLUDE \$HMPI/include
+EOF
+
+rm -rf $buildpath/xucg-1.1.1-huawei $buildpath/hucx-1.1.1-huawei $buildpath/hmpi-1.1.1-huawei
+ 
diff --git "a/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\346\265\213\350\257\225\346\212\245\345\221\212.docx" "b/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\346\265\213\350\257\225\346\212\245\345\221\212.docx"
new file mode 100644
index 0000000000000000000000000000000000000000..c06d82216cfdff0130a3ea1e8a55c7829bbd7ad3
Binary files /dev/null and "b/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\346\265\213\350\257\225\346\212\245\345\221\212.docx" differ
diff --git "a/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\347\247\273\346\244\215\346\214\207\345\215\227.docx" "b/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\347\247\273\346\244\215\346\214\207\345\215\227.docx"
new file mode 100644
index 0000000000000000000000000000000000000000..3f076b662407b699dcf4219ce234669c70d273f4
Binary files /dev/null and "b/ManufacturingSimulation/SU2-6.0.1/doc/SU2-6.0.1\345\272\224\347\224\250\347\247\273\346\244\215\346\214\207\345\215\227.docx" differ
diff --git "a/ManufacturingSimulation/SU2-6.0.1/doc/\351\262\262\351\271\217\345\237\272\345\272\247\350\275\257\344\273\266\346\220\255\345\273\272\346\214\207\345\215\227.docx" "b/ManufacturingSimulation/SU2-6.0.1/doc/\351\262\262\351\271\217\345\237\272\345\272\247\350\275\257\344\273\266\346\220\255\345\273\272\346\214\207\345\215\227.docx"
new file mode 100644
index 0000000000000000000000000000000000000000..9248ae50ab0fc71db845f13ec83d4680754613a6
Binary files /dev/null and "b/ManufacturingSimulation/SU2-6.0.1/doc/\351\262\262\351\271\217\345\237\272\345\272\247\350\275\257\344\273\266\346\220\255\345\273\272\346\214\207\345\215\227.docx" differ
diff --git a/ManufacturingSimulation/SU2-6.0.1/su2-6.0.1.sh b/ManufacturingSimulation/SU2-6.0.1/su2-6.0.1.sh
new file mode 100644
index 0000000000000000000000000000000000000000..eb9af59e414a155ba8fc923af88c9d9140d5ec32
--- /dev/null
+++ b/ManufacturingSimulation/SU2-6.0.1/su2-6.0.1.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+
+if [[ $# -ne 2 ]]; then
+    echo "The format is as follows:"
+    echo "bash su2-6.0.1.sh buildpath installpath"
+    echo ":param buildpath: 应用构建绝对路径"
+    echo ":param installpath: 应用安装绝对路径"
+    exit 1
+fi
+
+[[ ! "$1" =~ ^/.* || ! -d "$1" || "$1" = "/" ]] &&  echo "请输入正确的构建路径" && exit 1
+[[ ! "$2" =~ ^/.* || ! -d "$2" || "$2" = "/" ]] &&  echo "请输入正确的安装路径" && exit 1
+
+buildpath=$1
+installpath=$2
+[[ "$buildpath" =~ .*/$ ]] && buildpath=${buildpath%/*}
+[[ "$installpath" =~ .*/$ ]] && installpath=${installpath%/*}
+[[ "$buildpath" == "$installpath" ]] && echo "构建路径与安装路径需为不同路径" && exit 1
+yum install -y  environment-modules csh time patch libatomic perl-Data-Dumper autoconf automake libtool numactl binutils systemd-devel valgrind flex wget
+
+set -e
+yum install python2-numpy.aarch64 -y
+
+cd $buildpath
+wget -t 0 -c https://github.com/su2code/SU2/archive/refs/tags/v6.0.1.tar.gz -O SU2-6.0.1.tar.gz
+tar -zxvf SU2-6.0.1.tar.gz && rm -rf SU2-6.0.1.tar.gz
+cd SU2-6.0.1
+./bootstrap
+./configure --prefix=$installpath/SU2-6.0.1 CXXFLAGS="-O3 -std=c++11 -march=armv8.2-a -mtune=tsv110" --enable-mpi --with-cc=mpicc --with-cxx=mpicxx --with-hdf5-lib=$installpath/hdf5-1.12.1/lib --with-hdf5-include=$installpath/hdf5-1.12.1/include
+make -j$(nproc)
+make -j$(nproc) install
+
+cat>"$installpath/SU2-6.0.1/SU2_modulefiles"<<EOF
+#%Module1.0
+conflict su2
+variable modfile [file normalize [info script]]
+proc getModulefileDir {} {
+    variable modfile
+    set modfile_path [file dirname \$modfile]
+    return \$modfile_path
+}
+set pwd [getModulefileDir]
+set SU2 \$pwd
+setenv SU2 \$SU2
+set SU2_HOME \$SU2
+setenv SU2_HOME \$SU2
+set SU2_RUN \$SU2/bin
+setenv SU2_RUN \$SU2/bin
+prepend-path PATH \$SU2_RUN
+prepend-path PYTHONPATH \$SU2_RUN
+EOF
+
+rm -rf $buildpath/SU2-6.0.1
diff --git a/README.md b/README.md
index f76b5597fa1983b4b6fac5c03c296f27be507f33..728d9389696069eb273cdd12afddb6efd6661434 100644
--- a/README.md
+++ b/README.md
@@ -6,4 +6,5 @@ HPC Software List:
 - repositories: LifeSciences/RepeatMasker-4.1.2
 - repositories: LifeSciences/eigensoft-7.2.1
 - repositories: LifeSciences/redundans-v0.13c
-- repositories: LifeSciences/bamtools-2.5.2
\ No newline at end of file
+- repositories: LifeSciences/bamtools-2.5.2
+- repositories: ManufacturingSimulation/su2-6.0.1
\ No newline at end of file