diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index e2470dd5920c7960a5d591b5a96f3ab273d09790..3359349c27fa943aae1627ce2f1a1b078cf1e0e9 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -33,20 +33,21 @@ properties:
 
   clock-frequency:
     description: Frequency of the xclk clock in Hz.
+    deprecated: true
 
   enable-gpios:
     description: GPIO descriptor for the enable pin.
     maxItems: 1
 
-  vdddo-supply:
-    description: Chip digital IO regulator (1.8V).
-
   vdda-supply:
     description: Chip analog regulator (2.7V).
 
   vddd-supply:
     description: Chip digital core regulator (1.12V).
 
+  vdddo-supply:
+    description: Chip digital IO regulator (1.8V).
+
   flash-leds: true
   lens-focus: true
 
@@ -84,11 +85,10 @@ required:
   - compatible
   - reg
   - clocks
-  - clock-frequency
   - enable-gpios
-  - vdddo-supply
   - vdda-supply
   - vddd-supply
+  - vdddo-supply
   - port
 
 additionalProperties: false
@@ -104,22 +104,25 @@ examples:
         camera-sensor@1a {
             compatible = "sony,imx214";
             reg = <0x1a>;
-            vdddo-supply = <&pm8994_lvs1>;
-            vddd-supply = <&camera_vddd_1v12>;
+
+            clocks = <&camera_clk>;
+            assigned-clocks = <&camera_clk>;
+            assigned-clock-rates = <24000000>;
+
+            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
             vdda-supply = <&pm8994_l17>;
+            vddd-supply = <&camera_vddd_1v12>;
+            vdddo-supply = <&pm8994_lvs1>;
+
             lens-focus = <&ad5820>;
-            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
-            clocks = <&camera_clk>;
-            clock-frequency = <24000000>;
 
             port {
                 imx214_ep: endpoint {
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <480000000>;
+                    link-frequencies = /bits/ 64 <600000000>;
                     remote-endpoint = <&csiphy0_ep>;
                 };
             };
         };
     };
-
-...
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 2f9c8582f9401a2564688f88ef45f526c1a2a587..db40008f31cf1b2dcbe68f47d064869fee15a2bb 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -20,7 +20,9 @@
 #include <media/v4l2-subdev.h>
 
 #define IMX214_DEFAULT_CLK_FREQ	24000000
-#define IMX214_DEFAULT_LINK_FREQ 480000000
+#define IMX214_DEFAULT_LINK_FREQ	600000000
+/* Keep wrong link frequency for backward compatibility */
+#define IMX214_DEFAULT_LINK_FREQ_LEGACY	480000000
 #define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
 #define IMX214_FPS 30
 #define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
@@ -892,17 +894,26 @@ static int imx214_parse_fwnode(struct device *dev)
 		goto done;
 	}
 
-	for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
+	if (bus_cfg.nr_of_link_frequencies != 1)
+		dev_warn(dev, "Only one link-frequency supported, please review your DT. Continuing anyway\n");
+
+	for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) {
 		if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
 			break;
-
-	if (i == bus_cfg.nr_of_link_frequencies) {
-		dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
-			IMX214_DEFAULT_LINK_FREQ);
-		ret = -EINVAL;
-		goto done;
+		if (bus_cfg.link_frequencies[i] ==
+		    IMX214_DEFAULT_LINK_FREQ_LEGACY) {
+			dev_warn(dev,
+				 "link-frequencies %d not supported, please review your DT. Continuing anyway\n",
+				 IMX214_DEFAULT_LINK_FREQ);
+			break;
+		}
 	}
 
+	if (i == bus_cfg.nr_of_link_frequencies)
+		ret = dev_err_probe(dev, -EINVAL,
+				    "link-frequencies %d not supported, please review your DT\n",
+				    IMX214_DEFAULT_LINK_FREQ);
+
 done:
 	v4l2_fwnode_endpoint_free(&bus_cfg);
 	fwnode_handle_put(endpoint);