+| openEuler 23.03 alpha1 |
+- root (openeuler)
- pi (raspberry)
|
+2023/04/07 |
+231 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (UKUI desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+2023/04/07 |
+1.5 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha2 (DDE desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+2023/04/09 |
+1.6 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (Xfce desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+2023/04/07 |
+2.1 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (EFI boot) |
+- root (openeuler)
- pi (raspberry)
|
+2023/04/07 |
+333 MiB |
+6.1.19-1.0.0.3 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 |
+- root（openeuler）
- pi（raspberry）
|
+2023/03/30 |
+223 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
| openEuler 22.03 LTS SP1 alpha1 |
- root (openeuler)
- pi (raspberry)
|
2023/01/09 |
@@ -139,54 +187,6 @@ Basic information of the image is as follows. [more images](documents/images.en.
openEuler 22.03 LTS SP1 repository |
-| openEuler 22.09 alpha1 |
-- root (openeuler)
- pi (raspberry)
|
-2022/10/28 |
-237 MiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 repository built daily |
-
-
-| openEuler 22.09 alpha1 (UKUI desktop and Chinese input method) |
-- root (openeuler)
- pi (raspberry)
|
-2022/10/28 |
-1.4 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 repository built daily |
-
-
-| openEuler 22.09 alpha1 (DDE desktop and Chinese input method) |
-- root (openeuler)
- pi (raspberry)
|
-2022/10/28 |
-1.3 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 repository built daily |
-
-
-| openEuler 22.09 alpha1 (Xfce desktop and Chinese input method) |
-- root (openeuler)
- pi (raspberry)
|
-2022/10/28 |
-2 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 repository built daily |
-
-
-| openEuler 22.09 alpha1 (EFI boot) |
-- root (openeuler)
- pi (raspberry)
|
-2022/10/28 |
-259 MiB |
-5.10.0-106.18.0.14 |
-openEuler 22.09 repository built daily |
-
-
-| openEuler 22.09 |
-- root (openeuler)
- pi (raspberry)
|
-2022/09/30 |
-237 MiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 repository |
-
-
| openEuler 20.03 LTS SP3 alpha1 |
- root (openeuler)
- pi (raspberry)
|
2022/01/07 |
@@ -253,10 +253,10 @@ Refer to [Script for building openEuler image for Raspberry Pi](documents/openEu
#### Quickly Build without kernel compilation(Recommended)
> **NOTICE:**
->Most openEuler versions are currently supported, i.e., 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1.
+>Most openEuler versions are currently supported, i.e., 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03.
>When building an image with Xfce/UKUI/DDE desktop environment, you need to pay attention to three issues:
->1. For building an image with Xfce desktop environment, note that only openEuler 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1 are currently supported.
->2. For building an image with DDE desktop environment, note that only openEuler 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1 are currently supported.
+>1. For building an image with Xfce desktop environment, note that only openEuler 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03 are currently supported.
+>2. For building an image with DDE desktop environment, note that only openEuler 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03 are currently supported.
>3. Need to set the parameter `-s/--spec`. Please refer to the description of this parameter for details.
Build images with packages of raspberrypi-kernel, raspberrypi-firmware, and raspberrypi-bluetooth.
@@ -310,16 +310,17 @@ The meaning of each parameter:
Here, we provide two approaches to build an image, which both include compiling kernel and downloading firmware files of Raspberry Pi. These approaches will take considerably longer.
> **NOTICE:**
->Three openEuler versions are currently supported, i.e., 20.03 LTS, 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1.
+>Three openEuler versions are currently supported, i.e., 20.03 LTS, 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03.
>When building an image with Xfce/UKUI/DDE desktop environment, you need to pay attention to four issues:
->1. For building an image with Xfce desktop environment, note that only openEuler 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1 are currently supported.
+>1. For building an image with Xfce desktop environment, note that only openEuler 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03 are currently supported.
> - openEuler 21.03: You need to select the branch [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) of the [openEuler kernel](https://gitee.com/openeuler/kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/kernel.git` and set the parameter `-b/--branch` to `openEuler-21.03`.
> - openEuler 20.03 LTS SP2/20.03 LTS SP3: You need to select the branch [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-20.03-LTS`.
> - openEuler 21.09: You need to select the branch [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-21.09`.
> - openEuler 22.03 LTS: You need to select the branch [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS`.
> - openEuler 22.09: You need to select the branch [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.09`.
> - openEuler 22.03 LTS SP1: You need to select the branch [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS-SP1`.
->2. For building an image with UKUI desktop environment, note that only openEuler 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1 are currently supported.
+> - openEuler 23.03: You need to select the branch [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-23.03`.
+>2. For building an image with UKUI desktop environment, note that only openEuler 20.09, 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03 are currently supported.
> - openEuler 20.09: You need to select the branch [openEuler-20.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-20.09`.
> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3: You need to select the branch [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-20.03-LTS`.
> - openEuler 21.03: You need to select the branch [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) of the [openEuler kernel](https://gitee.com/openeuler/kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/kernel.git` and set the parameter `-b/--branch` to `openEuler-21.03`.
@@ -327,13 +328,15 @@ Here, we provide two approaches to build an image, which both include compiling
> - openEuler 22.03 LTS: You need to select the branch [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS`.
> - openEuler 22.09: You need to select the branch [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.09`.
> - openEuler 22.03 LTS SP1: You need to select the branch [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS-SP1`.
->3. For building an image with DDE desktop environment, note that only openEuler 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09 and 22.03 LTS SP1 are currently supported.
+> - openEuler 23.03: You need to select the branch [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-23.03`.
+>3. For building an image with DDE desktop environment, note that only openEuler 20.03 LTS SP1, 21.03, 20.03 LTS SP2, 21.09, 20.03 LTS SP3, 22.03 LTS, 22.09, 22.03 LTS SP1 and 23.03 are currently supported.
> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3: You need to select the branch [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-20.03-LTS`.
> - openEuler 21.03: You need to select the branch [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) of the [openEuler kernel](https://gitee.com/openeuler/kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/kernel.git` and set the parameter `-b/--branch` to `openEuler-21.03`.
> - openEuler 21.09: You need to select the branch [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-21.09`.
> - openEuler 22.03 LTS: You need to select the branch [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS`.
> - openEuler 22.09: You need to select the branch [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.09`.
> - openEuler 22.03 LTS SP1: You need to select the branch [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-22.03-LTS-SP1`.
+> - openEuler 23.03: You need to select the branch [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) of the [openEuler-RaspberryPi kernel](https://gitee.com/openeuler/raspberrypi-kernel), i.e., set the parameter `-k/--kernel` to `git@gitee.com:openeuler/raspberrypi-kernel.git` and set the parameter `-b/--branch` to `openEuler-23.03`.
>4. Need to set the parameter `-s/--spec`. Please refer to the description of this parameter for details.
##### Build on host
diff --git a/README.md b/README.md
index 3d8d2e303ca385d612a3702167de0401a1627ccb..300559df0fb742240b0564a97c542dd2a983d2a7 100644
--- a/README.md
+++ b/README.md
@@ -90,6 +90,54 @@ SIG 组基本信息位于 [sig-RaspberryPi](https://gitee.com/openeuler/communit
+| openEuler 23.03 内测版 |
+- root（openeuler）
- pi（raspberry）
|
+2023/04/07 |
+231 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（UKUI 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+2023/04/07 |
+1.5 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（DDE 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+2023/04/09 |
+1.6 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（Xfce 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+2023/04/07 |
+2.1 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（EFI 引导启动） |
+- root（openeuler）
- pi（raspberry）
|
+2023/04/07 |
+333 MiB |
+6.1.19-1.0.0.3 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 |
+- root（openeuler）
- pi（raspberry）
|
+2023/03/30 |
+223 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
| openEuler 22.03 LTS SP1 内测版 |
- root（openeuler）
- pi（raspberry）
|
2023/01/09 |
@@ -138,54 +186,6 @@ SIG 组基本信息位于 [sig-RaspberryPi](https://gitee.com/openeuler/communit
openEuler 22.03 LTS SP1 源仓库 |
-| openEuler 22.09 内测版 |
-- root（openeuler）
- pi（raspberry）
|
-2022/10/28 |
-237 MiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 每日构建源仓库 |
-
-
-| openEuler 22.09 内测版（UKUI 桌面、中文输入法） |
-- root（openeuler）
- pi（raspberry）
|
-2022/10/28 |
-1.4 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 每日构建源仓库 |
-
-
-| openEuler 22.09 内测版（DDE 桌面、中文输入法） |
-- root（openeuler）
- pi（raspberry）
|
-2022/10/28 |
-1.3 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 每日构建源仓库 |
-
-
-| openEuler 22.09 内测版（Xfce 桌面、中文输入法） |
-- root（openeuler）
- pi（raspberry）
|
-2022/10/28 |
-2 GiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 每日构建源仓库 |
-
-
-| openEuler 22.09 内测版（EFI 引导启动） |
-- root（openeuler）
- pi（raspberry）
|
-2022/10/28 |
-259 MiB |
-5.10.0-106.18.0.14 |
-openEuler 22.09 每日构建源仓库 |
-
-
-| openEuler 22.09 |
-- root（openeuler）
- pi（raspberry）
|
-2022/09/30 |
-237 MiB |
-5.10.0-106.18.0.13 |
-openEuler 22.09 源仓库 |
-
-
| openEuler 20.03 LTS SP3 内测版 |
- root（openeuler）
- pi（raspberry）
|
2022/01/07 |
@@ -255,10 +255,10 @@ SIG 组基本信息位于 [sig-RaspberryPi](https://gitee.com/openeuler/communit
#### 快速构建（无需编译内核，推荐）
> **须知：**
->当前支持多个 openEuler 版本，即 20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1 版本。
+>当前支持多个 openEuler 版本，即 20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03 版本。
>如果构建包含 Xfce/UKUI/DDE 桌面环境的镜像，需要注意三点：
->1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1 版本。
->2. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1 版本。
+>1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03 版本。
+>2. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03 版本。
>3. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。
使用已有的树莓派内核、固件、蓝牙等 RPM 包构建镜像。
@@ -313,16 +313,17 @@ SIG 组基本信息位于 [sig-RaspberryPi](https://gitee.com/openeuler/communit
这里，提供两种构建方式。
> **须知：**
->当前支持三个 openEuler 版本，即 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1 版本。
+>当前支持三个 openEuler 版本，即 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03 版本。
>如果构建包含 Xfce/UKUI/DDE 桌面环境的镜像，需要注意四点：
->1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1 版本，需要选择对应内核源码和分支。
+>1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03 版本，需要选择对应内核源码和分支。
> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。
> - openEuler 20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。
> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`。
> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。
> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。
> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。
->2. 构建包含 UKUI 桌面环境的镜像，当前只支持 openEuler 20.09/20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1 版本，需要选择对应内核源码和分支。
+> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。
+>2. 构建包含 UKUI 桌面环境的镜像，当前只支持 openEuler 20.09/20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03 版本，需要选择对应内核源码和分支。
> - openEuler 20.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.09`。
> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。
> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。
@@ -330,13 +331,15 @@ SIG 组基本信息位于 [sig-RaspberryPi](https://gitee.com/openeuler/communit
> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。
> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。
> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。
->3. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1 版本。
+> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。
+>3. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03 版本。
> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。
> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。
> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`。
> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。
> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。
> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。
+> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。
>4. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。
##### 主机上构建
diff --git a/documents/images.en.md b/documents/images.en.md
index 22153ff1e58df51c40a8e4d364710a7924866869..31497124014e054b2600c924b78b799a3a463dd6 100644
--- a/documents/images.en.md
+++ b/documents/images.en.md
@@ -15,6 +15,60 @@ Basic information of the image is as follows:
+| openEuler 23.03 alpha1 |
+- root (openeuler)
- pi (raspberry)
|
+- |
+2023/04/07 |
+231 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (UKUI desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+- |
+2023/04/07 |
+1.5 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha2 (DDE desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+- |
+2023/04/09 |
+1.6 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (Xfce desktop and Chinese input method) |
+- root (openeuler)
- pi (raspberry)
|
+- |
+2023/04/07 |
+2.1 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 alpha1 (EFI boot) |
+- root (openeuler)
- pi (raspberry)
|
+- |
+2023/04/07 |
+333 MiB |
+6.1.19-1.0.0.3 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/03/30 |
+223 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
| openEuler 22.03 LTS SP1 alpha1 |
- root (openeuler)
- pi (raspberry)
|
- |
diff --git a/documents/images.md b/documents/images.md
index 05ededcf0dc6382b56077e5a6a078e1f3523e2dc..15ddca3666ff586a63f0e8ba63533dfa3f7bc13e 100644
--- a/documents/images.md
+++ b/documents/images.md
@@ -15,6 +15,60 @@
+| openEuler 23.03 内测版 |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/04/07 |
+231 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（UKUI 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/04/07 |
+1.5 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（DDE 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/04/09 |
+1.6 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（Xfce 桌面、中文输入法） |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/04/07 |
+2.1 GiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 内测版（EFI 引导启动） |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/04/07 |
+333 MiB |
+6.1.19-1.0.0.3 |
+openEuler 23.03 repository |
+
+
+| openEuler 23.03 |
+- root（openeuler）
- pi（raspberry）
|
+- |
+2023/03/30 |
+223 MiB |
+6.1.19-1.0.0.2 |
+openEuler 23.03 repository |
+
+
| openEuler 22.03 LTS SP1 内测版 |
- root（openeuler）
- pi（raspberry）
|
- |
diff --git "a/documents/openEuler\351\225\234\345\203\217\347\232\204\346\236\204\345\273\272.md" "b/documents/openEuler\351\225\234\345\203\217\347\232\204\346\236\204\345\273\272.md"
index b04d5b0b100ac8909f2c80265424128d984624e8..be365c17362cfc92a77d93ed6c8ab7b03ccf4f98 100644
--- "a/documents/openEuler\351\225\234\345\203\217\347\232\204\346\236\204\345\273\272.md"
+++ "b/documents/openEuler\351\225\234\345\203\217\347\232\204\346\236\204\345\273\272.md"
@@ -90,7 +90,11 @@
根据内核不同版本，需要下载不同仓库的不同分支：
-1. 5.10 内核
+1. 6.1 内核
+
+ - openEuler 23.03：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-23.03 && cd raspberrypi-kernel`
+
+2. 5.10 内核
- openEuler 22.03 LTS SP1：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-22.03-LTS-SP1 && cd raspberrypi-kernel`
- openEuler 22.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-22.09 && cd raspberrypi-kernel`
@@ -98,7 +102,7 @@
- openEuler 21.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-21.09 && cd raspberrypi-kernel`
- openEuler 21.03：`git clone git@gitee.com:openeuler/kernel.git -b openEuler-21.03 && cd kernel`
-2. 4.19 内核
+3. 4.19 内核
- openEuler 20.03 LTS：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-20.03-LTS && cd raspberrypi-kernel`
- openEuler 20.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-20.09 && cd raspberrypi-kernel`
@@ -109,7 +113,11 @@
根据内核不同版本，需要载入不同的默认配置：
-1. 5.10 内核
+1. 6.1 内核
+
+ - openEuler 23.03：`make bcm2711_defconfig`
+
+2. 5.10 内核
- openEuler 22.03 LTS SP1：`make bcm2711_defconfig`
- openEuler 22.09：`make bcm2711_defconfig`
@@ -117,7 +125,7 @@
- openEuler 21.09：`make bcm2711_defconfig`
- openEuler 21.03：`make bcm2711_defconfig`
-2. 4.19 内核
+3. 4.19 内核
- openEuler 20.03 LTS：`make openeuler-raspi_defconfig`
- openEuler 20.09：`make openeuler-raspi_defconfig`
diff --git "a/documents/\344\272\244\345\217\211\347\274\226\350\257\221\345\206\205\346\240\270.md" "b/documents/\344\272\244\345\217\211\347\274\226\350\257\221\345\206\205\346\240\270.md"
index 147a25e9dd8bb661b53ec3786e78111f86eb973f..0e1a05bcb4dbabc6a5bc5190fb556645cef2cf64 100644
--- "a/documents/\344\272\244\345\217\211\347\274\226\350\257\221\345\206\205\346\240\270.md"
+++ "b/documents/\344\272\244\345\217\211\347\274\226\350\257\221\345\206\205\346\240\270.md"
@@ -46,7 +46,11 @@
根据内核不同版本，需要下载不同仓库的不同分支：
-1. 5.10 内核
+1. 6.1 内核
+
+ - openEuler 23.03：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-23.03 && cd raspberrypi-kernel`
+
+2. 5.10 内核
- openEuler 22.03 LTS SP1：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-22.03-LTS-SP1 && cd raspberrypi-kernel`
- openEuler 22.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-22.09 && cd raspberrypi-kernel`
@@ -54,7 +58,7 @@
- openEuler 21.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-21.09 && cd raspberrypi-kernel`
- openEuler 21.03：`git clone git@gitee.com:openeuler/kernel.git -b openEuler-21.03 && cd kernel`
-2. 4.19 内核
+3. 4.19 内核
- openEuler 20.03 LTS：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-20.03-LTS && cd raspberrypi-kernel`
- openEuler 20.09：`git clone git@gitee.com:openeuler/raspberrypi-kernel.git -b openEuler-20.09 && cd raspberrypi-kernel`
@@ -69,7 +73,11 @@
根据内核不同版本，需要载入不同的默认配置：
-1. 5.10 内核
+1. 6.1 内核
+
+ - openEuler 23.03：`make bcm2711_defconfig`
+
+2. 5.10 内核
- openEuler 22.03 LTS SP1：`make bcm2711_defconfig`
- openEuler 22.09：`make bcm2711_defconfig`
@@ -77,7 +85,7 @@
- openEuler 21.09：`make bcm2711_defconfig`
- openEuler 21.03：`make bcm2711_defconfig`
-2. 4.19 内核
+3. 4.19 内核
- openEuler 20.03 LTS：`make openeuler-raspi_defconfig`
- openEuler 20.09：`make openeuler-raspi_defconfig`
diff --git a/scripts/build-image.sh b/scripts/build-image.sh
index c42b98a821e2c1a333af4d2bdb27c02fd467226b..fd9bd3bd08c4b3a3d443e28c7b47a10ec1ad631b 100644
--- a/scripts/build-image.sh
+++ b/scripts/build-image.sh
@@ -269,6 +269,7 @@ make_rootfs(){
mkdir -p ${rootfs_dir}/etc/rc.d/init.d
fi
cp ${euler_dir}/extend-root.sh ${rootfs_dir}/etc/rc.d/init.d/extend-root.sh
+ echo net.ipv4.conf.wlan0.rp_filter=0 >> ${rootfs_dir}/etc/sysctl.conf
chmod +x ${rootfs_dir}/chroot.sh
mount --bind /dev ${rootfs_dir}/dev
mount -t proc /proc ${rootfs_dir}/proc
diff --git a/scripts/config-common/rpmlist-dde b/scripts/config-common/rpmlist-dde
index d349c53b478cd7f19316900ad18cb026f5facf97..23c0f8433883eec7fc463084bc75930888778c74 100644
--- a/scripts/config-common/rpmlist-dde
+++ b/scripts/config-common/rpmlist-dde
@@ -21,6 +21,7 @@ pulseaudio-module-bluetooth
parted
sudo
dde
+ibus-libpinyin
firefox
bc
systemd-timesyncd
diff --git a/scripts/config/rpmlist-dde b/scripts/config/rpmlist-dde
index 9270e00a10186bc346d5dbe5c0131b8c3fd18a54..46de32b5fc41242131ceb45e1129752cfee5433d 100644
--- a/scripts/config/rpmlist-dde
+++ b/scripts/config/rpmlist-dde
@@ -24,6 +24,7 @@ raspberrypi-firmware
raspberrypi-bluetooth
sudo
dde
+ibus-libpinyin
firefox
bc
systemd-timesyncd