diff --git a/lycium/template/HPKCHECK b/lycium/template/HPKCHECK
new file mode 100644
index 0000000000000000000000000000000000000000..7b5a239aaeed0353268893e97c020e19c6b374f0
--- /dev/null
+++ b/lycium/template/HPKCHECK
@@ -0,0 +1,24 @@
+# This is an example HPKCHECK file. Use this as a start to creating your own,
+# and remove these comments.
+
+# Contributor: Your Name <youremail@domain.com>
+# Maintainer: Your Name <youremail@domain.com>
+
+source HPKBUILD > /dev/null 2>&1    # 导入HPKBUILD文件
+logfile=${LYCIUM_ROOT}/../thirdparty/${pkgname}/${pkgname}_${ARCH}_${OHOS_SDK_VER}_test.log
+
+# 测试前的准备, 如果不需要可以不写。
+checkprepare(){
+    return 0
+}
+
+# 在OH环境执行测试的接口
+openharmonycheck() {
+    res=0                               # 记录返回值
+    cd ${builddir}/${ARCH}-build        # 进入到测试目录
+    ctest > ${logfile} 2>&1             # 执行测试命令并将测试结果导出到${logfile}，测试命令根据每个库的真实情况填写
+    res=$?                              # 记录测试结果返回值
+    cd $OLDPWD                          # 返回上一次目录
+
+    return $res                         # 返回测试值
+}
diff --git a/lycium/test.sh b/lycium/test.sh
new file mode 100755
index 0000000000000000000000000000000000000000..c438fa90fbf33ccad7af5064b4d613c338f0d1c4
--- /dev/null
+++ b/lycium/test.sh
@@ -0,0 +1,194 @@
+#!/usr/bin/bash
+# 此脚本运行在OpenHarmony环境
+# 根目录
+LYCIUM_ROOT=`pwd`
+export LYCIUM_ROOT=$LYCIUM_ROOT
+export OHOS_SDK_VER=OpenHarmony_4.0.8.1                 # 具体SDK, 版本需要用户填写
+ARCH=
+hpkPaths=()
+successlibs=()
+failedlibs=()
+
+CHECK_RESULT_PATH=$LYCIUM_ROOT/check_result              # 收集测试结果(log以及生成资源)的目录
+LOG_PATH=$CHECK_RESULT_PATH/check_log                     # 收集测试log的目录
+export LYCIUM_FAULT_PATH=$CHECK_RESULT_PATH/check_fault          # 收集组件测试错误日志，该目录需要创建组件名，日志最终路径为 $CHECK_RESULT_PATH/check_fault/${pkgname}/fault.log
+export LYCIUM__MANUAL_CONFIRM_PATH=$CHECK_RESULT_PATH/manual_confirm  # 手动确认信息(组件生成的如图片，音视频文件等),该目录需要创建组件名，文件最终路径为 $CHECK_RESULT_PATH/manual_confirm/${pkgname}/xxx.wav
+
+envmessage="please follow the CITools instruction: https://gitee.com/han_jin_fei/lycium-citools"
+
+# 检查测试环境
+checktestenv(){
+    if [ ! -d $LOG_PATH ]
+    then
+        mkdir -p $LOG_PATH
+    fi
+    if [ ! -d $LYCIUM_FAULT_PATH ]
+    then
+        mkdir -p $LYCIUM_FAULT_PATH
+    fi
+
+    if [ ! -d $LYCIUM__MANUAL_CONFIRM_PATH ]
+    then
+        mkdir -p $LYCIUM__MANUAL_CONFIRM_PATH
+    fi
+
+    which cmake >/dev/null 2>&1
+    if [ $? -ne 0 ]
+    then
+        echo "cmake command not found, "$envmessage
+        exit 1
+    fi
+
+    which make >/dev/null 2>&1
+    if [ $? -ne 0 ]
+    then
+        echo "make command not found, "$envmessage
+        exit 1
+    fi
+
+    which ctest >/dev/null 2>&1
+    if [ $? -ne 0 ]
+    then
+        echo "ctest command not found, "$envmessage
+        exit 1
+    fi
+
+    which perl >/dev/null 2>&1
+    if [ $? -ne 0 ]
+    then
+        echo "perl command not found, "$envmessage
+        exit 1
+    fi
+}
+
+# 获取CPU架构
+getcpuarchitecture(){
+
+    cpubits=`getconf LONG_BIT`
+
+    if [ ${cpubits} == "64" ]
+    then
+        ARCH=arm64-v8a
+    fi
+    if [ ${cpubits} == "32" ]
+    then
+        ARCH=armeabi-v7a
+    fi
+
+    export ARCH
+}
+
+# 设置依赖库路径
+setloaddynamiclibrarypath(){
+    libdir=${LYCIUM_ROOT}/usr
+    for lib in `ls $libdir`
+    do
+        if [ -d $libdir/$lib ]
+        then
+            export LD_LIBRARY_PATH=$libdir/$lib/$ARCH/lib:$LD_LIBRARY_PATH
+        fi
+    done
+}
+
+# 搜索已编译的库列表
+findlibsdir(){
+    jobs=($*)
+    for job in ${jobs[@]}
+    do
+        tmppath=${LYCIUM_ROOT}/usr/$job     # 查找已编译的库路径
+        if [ -d $tmppath ]
+        then
+            hpkPaths[${#hpkPaths[@]}]=${LYCIUM_ROOT}/../thirdparty/$job  # 记录库编译路径
+        fi
+    done
+}
+
+# 获取已编译的三方库列表
+findbuilddir(){
+    tmplibs=()
+    for file in $(ls $1)
+    do
+        if [ -d $1/$file ]
+        then
+            tmplibs[${#tmplibs[@]}]=$file
+        fi
+    done
+    findlibsdir ${tmplibs[@]}
+}
+
+# 开始测试三方库
+checkhpk(){
+    for libdir in ${hpkPaths[*]}
+    do
+        if [ ! -f $libdir/HPKCHECK ]
+        then
+          #  echo "${libdir##*/} no test!"
+            continue;
+        fi
+        cd $libdir
+        echo "start check ${libdir##*/}"
+        source ./HPKCHECK
+        f=`type -t checkprepare`
+        if [ "x$f" = "xfunction" ]
+        then
+            checkprepare > /dev/null 2>&1       # 执行测试前准备工作
+        fi
+        openharmonycheck > /dev/null 2>&1   # 执行测试
+        if [ $? -ne 0 ]
+        then
+            failedlibs[${#failedlibs[@]}]=${libdir##*/}
+            echo -e "check ${libdir##*/} \033[31m failed \033[0m"   # 红色显示失败
+        else
+            successlibs[${#successlibs[@]}]=${libdir##*/}
+            echo -e "check ${libdir##*/} \033[32m success \033[0m"     # 绿色显示成功
+        fi
+        
+        if [ -f ${libdir##*/}_${ARCH}_${OHOS_SDK_VER}_test.log ]
+        then
+            cp ${libdir##*/}_${ARCH}_${OHOS_SDK_VER}_test.log $LOG_PATH    # 将测试的log收集到指定目录
+        fi
+
+        cd $OLDPWD
+    done
+
+    echo "################################################"
+    echo "CHECK REPORT : "
+    let total=${#failedlibs[*]}+${#successlibs[*]}
+    echo "TEST TOTAL LIBS : $total"
+    echo "TEST FAILED : ${#failedlibs[*]}"
+    if [ ${#failedlibs[*]} -gt 0 ]
+    then
+        echo "FAILED TEST ARE:"
+        for ((i=0;i<${#failedlibs[*]};i++))
+        do
+            echo "${failedlibs[$i]}"
+        done
+    fi
+    echo "################################################"
+
+    return 0
+}
+
+main(){
+    # 环境检测
+    checktestenv
+    getcpuarchitecture
+    # 动态库准备
+    setloaddynamiclibrarypath
+
+    if [ $# -ne 0 ]
+    then
+        findlibsdir $*
+    else
+        findbuilddir ${LYCIUM_ROOT}/usr
+    fi
+    # 运行所有发现的测试
+    checkhpk
+
+    unset LYCIUM_ROOT
+    unset LD_LIBRARY_PATH
+    unset OHOS_SDK_VER
+    unset ARCH
+}
+
+main $*