From 75bd1e9cd8e275c92c41c1be0de781d530abf232 Mon Sep 17 00:00:00 2001 From: maokelong Date: Tue, 17 Aug 2021 02:44:07 +0800 Subject: [PATCH] Copy file interfaces to the standardinterfaces directory Signed-off-by: maokelong --- BUILD.gn | 4 +- file/BUILD.gn | 7 +- interfaces/kits/file/hal_file.h | 45 +++++ interfaces/kits/file/utils_file.h | 276 ++++++++++++++++++++++++++++++ 4 files changed, 325 insertions(+), 7 deletions(-) create mode 100644 interfaces/kits/file/hal_file.h create mode 100644 interfaces/kits/file/utils_file.h diff --git a/BUILD.gn b/BUILD.gn index 86d4eb3..b715035 100755 --- a/BUILD.gn +++ b/BUILD.gn @@ -9,7 +9,7 @@ # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and -# limitations under the License. +# limitations under the License. import("//build/lite/config/subsystem/lite_subsystem.gni") import("//build/lite/ndk/ndk.gni") @@ -36,6 +36,6 @@ ndk_lib("native_api") { ] if (ohos_kernel_type == "liteos_m") { deps += [ "file:native_file" ] - head_files += [ "//utils/native/lite/include/utils_file.h" ] + head_files += [ "//utils/native/lite/interfaces/kits/file/utils_file.h" ] } } diff --git a/file/BUILD.gn b/file/BUILD.gn index 8533e33..3b246ec 100755 --- a/file/BUILD.gn +++ b/file/BUILD.gn @@ -9,16 +9,13 @@ # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and -# limitations under the License. +# limitations under the License. import("//build/lite/config/component/lite_component.gni") static_library("native_file") { sources = [ "src/file_impl_hal/file.c" ] - include_dirs = [ - "//utils/native/lite/include", - "//utils/native/lite/hals/file", - ] + include_dirs = [ "//utils/native/lite/interfaces/kits/file" ] deps = [ "$ohos_board_adapter_dir/hals/utils/file:hal_file_static" ] } diff --git a/interfaces/kits/file/hal_file.h b/interfaces/kits/file/hal_file.h new file mode 100644 index 0000000..bfcf3a2 --- /dev/null +++ b/interfaces/kits/file/hal_file.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2020 Huawei Device Co., Ltd. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef HAL_FILE_SYSTEM_API_H +#define HAL_FILE_SYSTEM_API_H + +#ifdef __cplusplus +#if __cplusplus +extern "C" { +#endif +#endif /* __cplusplus */ + +int HalFileOpen(const char* path, int oflag, int mode); + +int HalFileClose(int fd); + +int HalFileRead(int fd, char* buf, unsigned int len); + +int HalFileWrite(int fd, const char* buf, unsigned int len); + +int HalFileDelete(const char* path); + +int HalFileStat(const char* path, unsigned int* fileSize); + +int HalFileSeek(int fd, int offset, unsigned int whence); + +#ifdef __cplusplus +#if __cplusplus +} +#endif +#endif /* __cplusplus */ + +#endif // HAL_FILE_SYSTEM_API_H \ No newline at end of file diff --git a/interfaces/kits/file/utils_file.h b/interfaces/kits/file/utils_file.h new file mode 100644 index 0000000..109dff2 --- /dev/null +++ b/interfaces/kits/file/utils_file.h @@ -0,0 +1,276 @@ +/* + * Copyright (c) 2020 Huawei Device Co., Ltd. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @addtogroup utils_file + * @{ + * + * @brief Performs operations on a file. + * + * This module allows you to performs file operations such as to open, close, + * read, and write a file, and to obtain the file size. + * The filing system varies according to the hardware platform. + * The following limitations are imposed on a platform that + * uses the Serial Peripheral Interface Flash Filing System (SPIFFS): + * + * + * @since 1.0 + * @version 1.0 + */ + +/** + * @file utils_file.h + * + * @brief Performs operations on a file, including to open, close, write, read, and delete a file. + * + * @since 1.0 + * @version 1.0 + */ + +#ifndef FILE_SYSTEM_API_H +#define FILE_SYSTEM_API_H + +#ifdef __cplusplus +#if __cplusplus +extern "C" { +#endif +#endif /* __cplusplus */ + +/** + * @brief Defines the offset position used by {@link UtilsFileSeek} + * in a file to start offsetting from the file header. + * + */ +#ifndef SEEK_SET_FS +#define SEEK_SET_FS 0 +#endif + +/** + * @brief Defines the offset position used by {@link UtilsFileSeek} + * in a file to start offsetting from the current read and write position. + * + */ +#ifndef SEEK_CUR_FS +#define SEEK_CUR_FS 1 +#endif + +/** + * @brief Defines the offset position used by {@link UtilsFileSeek} + * in a file to start offsetting from the end of the file. + * + */ +#ifndef SEEK_END_FS +#define SEEK_END_FS 2 +#endif + +/** + * @brief Defines a flag used by{@link UtilsFileOpen} to open a file in read-only mode. + * + */ +#ifndef O_RDONLY_FS +#define O_RDONLY_FS 00 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to open a file in write-only mode. + * + */ +#ifndef O_WRONLY_FS +#define O_WRONLY_FS 01 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to open a file in read-and-write mode. + * + */ +#ifndef O_RDWR_FS +#define O_RDWR_FS 02 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to create a file when the file to open does not exist. + * + */ +#ifndef O_CREAT_FS +#define O_CREAT_FS 0100 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to check whether the file to open exists + * when {@link O_CREAT_FS} is already set. + * + * If the file does not exist, a new file will be created. If the file exists, the file cannot be opened. + * + */ +#ifndef O_EXCL_FS +#define O_EXCL_FS 0200 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to clear the file content + * if the file exists and can be opened in write mode. + * + */ +#ifndef O_TRUNC_FS +#define O_TRUNC_FS 01000 +#endif + +/** + * @brief Defines a flag used by {@link UtilsFileOpen} to start reading or writing from the end of a file. + * + */ +#ifndef O_APPEND_FS +#define O_APPEND_FS 02000 +#endif + +/** + * @brief Opens or creates a file. + * + * @param path Indicates the file to open or create. + * @param oflag Indicates the mode of opening a file. The following modes are supported. + * oflag | Description + * ------------|------------------------------------------------ + * O_RDONLY_FS | For details, see {@link O_RDONLY_FS}. + * O_WRONLY_FS | For details, see {@link O_WRONLY_FS}. + * O_RDWR_FS | For details, see {@link O_RDWR_FS}. + * O_CREAT_FS | For details, see {@link O_CREAT_FS}. + * O_EXCL_FS | For details, see {@link O_EXCL_FS}. + * O_TRUNC_FS | For details, see {@link O_TRUNC_FS}. + * O_APPEND_FS | For details, see {@link O_APPEND_FS}. + * These modes can be used together, with each of them identified by "or". + * @param mode Used for function compatibility. This parameter does not take effect in any scenario. + * @return Returns the file descriptor if the file is opened or created; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileOpen(const char* path, int oflag, int mode); + +/** + * @brief Closes a file with the specified file descriptor. + * + * @param fd Indicates the file descriptor of the file to close. + * @return Returns 0 if the file is closed; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileClose(int fd); + +/** + * @brief Reads a specified length of data from a file with the specified file descriptor + * and writes the data into the buffer. + * + * @param fd Indicates the file descriptor of the file to read. + * @param buf Indicates the buffer that stores the read data. This is an output parameter. + * @param len Indicates the length of the data to read. + * @return Returns the number of bytes of the data if the data is read; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileRead(int fd, char* buf, unsigned int len); + +/** + * @brief Writes a specified length of data into a file with the specified file descriptor. + * + * @param fd Indicates the file descriptor of the file where to write the data. + * @param buf Indicates the data to write. + * @param len Indicates the length of the data to write. + * @return Returns the number of bytes of the data if the data is written; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileWrite(int fd, const char* buf, unsigned int len); + +/** + * @brief Deletes a specified file. + * + * @param path Indicates the file to delete. + * @attention If the number of opened files reaches the upper limit (32), close any of them first. + * Otherwise, the file cannot be deleted. + * @return Returns 0 if the file is deleted; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileDelete(const char* path); + +/** + * @brief Obtains the file size. + * + * @param path Indicates the file name. + * @param fileSize Indicates the file size. This is an output parameter. + * @return Returns 0 if the file size is obtained; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileStat(const char* path, unsigned int* fileSize); + +/** + * @brief Adjusts the read and write position offset in a file. + * + * @param fd Indicates the file descriptor of the file where the read and write position offset needs adjustment. + * @param offset Indicates the offset of the read and write position based on the whence parameter. + * The value can be negative if the value of whence is SEEK_CUR_FS or SEEK_END_FS. + * @param whence Indicates the start position of the offset. The following start positions are supported. + * whence | Description + * ------------|------------------------------------------------ + * SEEK_SET_FS | Adjusts the read and write position to the file header. + * ^ | Then adds the offset after the read and write position. + * SEEK_CUR_FS | Adds the offset after the current read and write position. + * SEEK_END_FS | Adjusts the read and write position to the end of the file. + * ^ | Then adds the offset after the read and write position. + * + * @return Returns the current read and write position if the operation is successful; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileSeek(int fd, int offset, unsigned int whence); + +/** + * @brief Copies the source file to a target file. + * + * @param src Indicates the source file to copy. + * @param dest Indicates the target file. + * @attention If the number of opened files reaches the upper limit (32), close any two files first. + * Otherwise, the file cannot be copied. + * @return Returns 0 if the operation is successful; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileCopy(const char* src, const char* dest); + +/** + * @brief Moves the source file into a target file. + * + * @param src Indicates the source file. + * @param dest Indicates the target file. + * @attention If the number of opened files reaches the upper limit (32), close any two files first. + * Otherwise, the file cannot be moved. + * @return Returns 0 if the operation is successful; returns -1 otherwise. + * @since 1.0 + * @version 1.0 + */ +int UtilsFileMove(const char* src, const char* dest); + +#ifdef __cplusplus +#if __cplusplus +} +#endif +#endif /* __cplusplus */ + +#endif // FILE_SYSTEM_API_H +/** @} */ \ No newline at end of file -- Gitee