diff --git a/api/@ohos.graphics.drawing.d.ts b/api/@ohos.graphics.drawing.d.ts
index 8365a1cc4286eb486016088e00b37bef3df27daa..5469a281cfed2285e83b527c7720acad07278b61 100644
--- a/api/@ohos.graphics.drawing.d.ts
+++ b/api/@ohos.graphics.drawing.d.ts
@@ -140,7 +140,8 @@ declare namespace drawing {
      */
     MODULATE = 13,
     /**
-     * r = s + d - s * d, inverts the color values of the source and destination pixels, multiplies them, and then inverts the result, typically producing a brighter outcome.	
+     * r = s + d - s * d, inverts the color values of the source and destination pixels, multiplies them,
+     * and then inverts the result, typically producing a brighter outcome.	
      * @syscap SystemCapability.Graphics.Drawing
      * @since 11
      */
@@ -341,7 +342,8 @@ declare namespace drawing {
     constructor(roundRect: RoundRect);
 
     /**
-     * A constructor used to create a RoundRect object. A rounded rectangle is created when both xRadii and yRadii are greater than 0. Otherwise, only a rectangle is created.
+     * A constructor used to create a RoundRect object. A rounded rectangle is created when both xRadii and yRadii are greater than 0.
+     * Otherwise, only a rectangle is created.
      * @param { common2D.Rect } rect - Rectangle that encloses the rounded rectangle to create.
      * @param { number } xRadii - Radius of the rounded corner on the X axis. The value is a floating point number. A negative number is invalid.
      * @param { number } yRadii - Radius of the rounded corner on the Y axis. The value is a floating point number. A negative number is invalid.
@@ -367,7 +369,8 @@ declare namespace drawing {
     /**
      * Obtains the radii of the specified rounded corner in this rounded rectangle.
      * @param { CornerPos } pos - Position of the rounded corner.
-     * @returns { common2D.Point } Point. The horizontal coordinate indicates the radius of the rounded corner on the X axis, and the vertical coordinate indicates the radius on the Y axis.
+     * @returns { common2D.Point } Point. The horizontal coordinate indicates the radius of the rounded corner on the X axis,
+     * and the vertical coordinate indicates the radius on the Y axis.
      * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
      * <br>2. Incorrect parameter types; 3. Parameter verification failed.
      * @syscap SystemCapability.Graphics.Drawing
@@ -675,7 +678,8 @@ declare namespace drawing {
     rLineTo(dx: number, dy: number): void;
 
     /**
-     * Draws a quadratic Bezier curve from the last point of this path to a point relative to the last point. If the path is empty, the start point (0, 0) is used.
+     * Draws a quadratic Bezier curve from the last point of this path to a point relative to the last point.
+     * If the path is empty, the start point (0, 0) is used.
      * @param { number } dx1 - X offset of the control point relative to the last point. A positive number indicates a rightward shift from the last point,
      * and a negative number indicates a leftward shift from the last point. The value is a floating point number.
      * @param { number } dy1 - Y offset of the control point relative to the last point. A positive number indicates an upward shift from the last point,
@@ -712,7 +716,8 @@ declare namespace drawing {
     rConicTo(ctrlX: number, ctrlY: number, endX: number, endY: number, weight: number): void;
 
     /**
-     * Draws a cubic Bezier curve from the last point of this path to a point relative to the last point. If the path is empty, the start point (0, 0) is used.
+     * Draws a cubic Bezier curve from the last point of this path to a point relative to the last point.
+     * If the path is empty, the start point (0, 0) is used.
      * @param { number } ctrlX1 - X offset of the first control point relative to the last point. A positive number indicates a rightward shift
      * from the last point, and a negative number indicates a leftward shift from the last point. The value is a floating point number.
      * @param { number } ctrlY1 - Y offset of the first control point relative to the last point. A positive number indicates an upward shift
@@ -1349,7 +1354,8 @@ declare namespace drawing {
     drawImage(pixelmap: image.PixelMap, left: number, top: number, samplingOptions?: SamplingOptions): void;
     
     /**
-     * Splits an image into multiple sections based on the lattice object's configuration and draws each section into the specified target rectangle on the canvas.
+     * Splits an image into multiple sections based on the lattice object's configuration and
+     * draws each section into the specified target rectangle on the canvas.
      * The intersections of even-numbered rows and columns (starting from 0) are fixed points.
      * If the fixed lattice area fits within the target rectangle, it will be drawn without scaling.
      * Otherwise, it will be scaled proportionally to fit the target rectangle.
@@ -1387,7 +1393,8 @@ declare namespace drawing {
      * Draws an image onto a specified area of the canvas.
      * @param { image.PixelMap } pixelmap - The source image.
      * @param { common2D.Rect } dstRect - Rectangle object, which specifies the area of the canvas onto which the image will be drawn.
-     * @param { SamplingOptions } samplingOptions - Sampling options. By default, the SamplingOptions object created using the no-argument constructor is used.
+     * @param { SamplingOptions } samplingOptions - Sampling options.
+     * By default, the SamplingOptions object created using the no-argument constructor is used.
      * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
      * <br>2. Incorrect parameter types.
      * @syscap SystemCapability.Graphics.Drawing
@@ -1400,7 +1407,8 @@ declare namespace drawing {
      * @param { image.PixelMap } pixelmap - The source image.
      * @param { common2D.Rect } srcRect - Rectangle object, which specifies the portion of the image to draw.
      * @param { common2D.Rect } dstRect - Rectangle object, which specifies the area of the canvas onto which the image will be drawn.
-     * @param { SamplingOptions } samplingOptions - Sampling options. By default, the SamplingOptions object created using the no-argument constructor is used.
+     * @param { SamplingOptions } samplingOptions - Sampling options.
+     * By default, the SamplingOptions object created using the no-argument constructor is used.
      * @param { SrcRectConstraint } constraint - Constraint type of the source rectangle. The default value is STRICT.
      * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
      * <br>2. Incorrect parameter types.
@@ -1685,8 +1693,8 @@ declare namespace drawing {
 
     /**
      * Restores the canvas state (canvas matrix and clipping area) to a specified number.
-     * @param { number } count - Depth of the canvas statuses to restore.
-     * The value is an integer. If the value is less than or equal to 1, the canvas is restored to the initial state.
+     * @param { number } count - Depth of the canvas statuses to restore. The value is an integer.
+     * If the value is less than or equal to 1, the canvas is restored to the initial state.
      * If the value is greater than the number of canvas statuses that have been saved, no operation is performed.
      * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
      * <br>2. Incorrect parameter types.
@@ -2049,8 +2057,6 @@ declare namespace drawing {
      * @since 12
      */
     uniqueID(): number;
-  
-
   }
 
   /**
@@ -2698,7 +2704,8 @@ declare namespace drawing {
      xMin?: number;
  
      /**
-      * Horizontal distance from the rightmost edge of any glyph bounding box to the origin. The value is a positive number, indicating the maximum horizontal coordinate across all glyph bounding boxes.
+      * Horizontal distance from the rightmost edge of any glyph bounding box to the origin.
+      * The value is a positive number, indicating the maximum horizontal coordinate across all glyph bounding boxes.
       * @type { ?number }
       * @syscap SystemCapability.Graphics.Drawing
       * @since 12
@@ -2800,7 +2807,7 @@ declare namespace drawing {
      * the decimal part is discarded and converted into an integer.
      * @param { Array<RectType> | null } fRectTypes - Array that holds the rectangle types. The default value is null.
      * If this parameter is specified, the array size must be (fXCount + 1) * (fYCount + 1).
-     * @param { Array<number> | null } fColors - Array that holds the colors used to fill the lattices. 
+     * @param { Array<number> | null } fColors - Array that holds the colors used to fill the lattices.
      * Each color is represented by a 32-bit unsigned integer in hexadecimal ARGB format.
      * The default value is null. If this parameter is specified, the array size must be (fXCount + 1) * (fYCount + 1).
      * @returns { Lattice } Lattice object.
@@ -3374,6 +3381,7 @@ declare namespace drawing {
      * @param { ImageFilter } foreground - Indicates the input foreground filter.
      * @returns { ImageFilter } ImageFilter object.
      * @throws { BusinessError } 25900001 - Parameter error. Possible causes: Incorrect parameter range.
+     * <br>2. Incorrect parameter types.
      * @static
      * @syscap SystemCapability.Graphics.Drawing
      * @crossplatform
@@ -4256,7 +4264,8 @@ declare namespace drawing {
      */
     postRotate(degree: number, px: number, py: number): void;
     /**
-     * Post multiplies this matrix by a matrix that is derived from an identity matrix after it has been scaled with the coefficient (sx, sy) at the scale point (px, py).
+     * Post multiplies this matrix by a matrix that is derived from an identity matrix after it has been
+     * scaled with the coefficient (sx, sy) at the scale point (px, py).
      * @param { number } sx - Scale coefficient along the X axis. If a negative number is passed in,
      * the matrix is mirrored around y = px before being scaled. The value is a floating point number.
      * @param { number } sy - Scale coefficient along the Y axis. If a negative number is passed in,
@@ -4282,19 +4291,6 @@ declare namespace drawing {
      */
     postTranslate(dx: number, dy: number): void;
 
-    /**
-     * Sets matrix to matrix multiplied by matrix constructed from skewing by (kx, ky) about pivot point (px, py).
-     * This can be thought of as scaling relative to a pivot point before applying matrix.
-     * @param { number } kx - Indicates the horizontal skew factor.
-     * @param { number } ky - Indicates the vertical skew factor.
-     * @param { number } px - Indicates the pivot on x-axis.
-     * @param { number } py - Indicates the pivot on y-axis.
-     * @syscap SystemCapability.Graphics.Drawing
-     * @crossplatform
-     * @since 20
-     */
-    preSkew(kx: number, ky: number, px: number, py: number): void;
-  
     /**
      * Premultiplies this matrix by a matrix that is derived from an identity matrix after it has been rotated by a
      * given degree around the rotation point (px, py).
@@ -4349,6 +4345,19 @@ declare namespace drawing {
      * @since 12
      */
     preTranslate(dx: number, dy: number): void;
+    
+    /**
+     * Sets matrix to matrix multiplied by matrix constructed from skewing by (kx, ky) about pivot point (px, py).
+     * This can be thought of as scaling relative to a pivot point before applying matrix.
+     * @param { number } kx - Indicates the horizontal skew factor.
+     * @param { number } ky - Indicates the vertical skew factor.
+     * @param { number } px - Indicates the pivot on x-axis.
+     * @param { number } py - Indicates the pivot on y-axis.
+     * @syscap SystemCapability.Graphics.Drawing
+     * @crossplatform
+     * @since 20
+     */
+    preSkew(kx: number, ky: number, px: number, py: number): void;
     /**
      * Resets this matrix to an identity matrix.
      * @syscap SystemCapability.Graphics.Drawing