diff --git a/arkui/ace_engine/native/native_node.h b/arkui/ace_engine/native/native_node.h
index ce5b57eb466694a3560506fa7a0111385ae2d37f..ca5dd24b274d0b67d559dc074ca02814ec557c33 100644
--- a/arkui/ace_engine/native/native_node.h
+++ b/arkui/ace_engine/native/native_node.h
@@ -176,7 +176,8 @@ typedef struct {
  *
  * @since 12
  */
-typedef enum {
+typedef enum
+{
     /**
      * @brief Defines the width attribute, which can be set, reset, and obtained as required through APIs.
      *
@@ -1044,8 +1045,8 @@ typedef enum {
      * .value[0].u32 fill color, in 0xARGB format. \n
      * .value[1].u32: stroke color, in 0xARGB format. \n
      * .value[2].f32: stroke width, in vp. \n
-      * .value[3].i32: mask type. The parameter type is {@link ArkUI_MaskType}.
-      * The value is <b>ARKUI_MASK_TYPE_ELLIPSE</b> for the ellipse shape.\n
+     * .value[3].i32: mask type. The parameter type is {@link ArkUI_MaskType}.
+     * The value is <b>ARKUI_MASK_TYPE_ELLIPSE</b> for the ellipse shape.\n
      * .value[4].f32: width of the ellipse.\n
      * .value[5].f32: height of the ellipse.\n
      * 4. Path:\n
@@ -1385,7 +1386,7 @@ typedef enum {
      * @brief Defines the focused state. This attribute can be set and obtained as required through APIs.
      * @note Setting the parameter to <b>0</b> shifts focus from the currently focused component on the current level
      * of the page to the root container.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].i32: The parameter type is 1 or 0.
      * \n
@@ -1511,44 +1512,44 @@ typedef enum {
     NODE_MARGIN_PERCENT,
 
     /**
-      * @brief The implicit shared element transition within the component supports attribute setting,
-      * attribute reset, and attribute acquisition interfaces.
-      *
-      * Attribute setting method parameter {@link ArkUI_AttributeItem} format: \n
-      * .value[0]?.i32: The parameter type is 1 or 0. 2 components that share element bindings,
-      * Whether to continue to participate in the shared element animation when the appearance element is not deleted,
-      * the default is false, and the original position will remain unchanged if not involved. \n
-      * .string is used to set the binding relationship. Set the id to "" to
-      * clear the binding relationship to avoid participating in sharing behavior. \n
-      * The id can be changed and the binding relationship re-established.
-      * The same ID can only be bound to two components and they are in/out roles of different types.
-      * Multiple components cannot be bound to the same id. \n
-      *\n
-      * Attribute acquisition method return value {@link ArkUI_AttributeItem} format: \n
-      * .value[0].i32: The parameter type is 1 or 0. 2 components that share element bindings,
-      * Whether to continue to participate in the shared element animation when the appearance element is not deleted,
-      * the default is not false, if not involved, the original position will remain unchanged. \n
-      * .string is used to set the binding relationship. Set the id to "" to
-      * clear the binding relationship to avoid participating in sharing behavior. \n
-      * The id can be changed and the binding relationship re-established.
-      * The same ID can only be bound to two components and they are in/out roles of different types.
-      * Multiple components cannot be bound to the same id. \n
-      */
+     * @brief The implicit shared element transition within the component supports attribute setting,
+     * attribute reset, and attribute acquisition interfaces.
+     *
+     * Attribute setting method parameter {@link ArkUI_AttributeItem} format: \n
+     * .value[0]?.i32: The parameter type is 1 or 0. 2 components that share element bindings,
+     * Whether to continue to participate in the shared element animation when the appearance element is not deleted,
+     * the default is false, and the original position will remain unchanged if not involved. \n
+     * .string is used to set the binding relationship. Set the id to "" to
+     * clear the binding relationship to avoid participating in sharing behavior. \n
+     * The id can be changed and the binding relationship re-established.
+     * The same ID can only be bound to two components and they are in/out roles of different types.
+     * Multiple components cannot be bound to the same id. \n
+     *\n
+     * Attribute acquisition method return value {@link ArkUI_AttributeItem} format: \n
+     * .value[0].i32: The parameter type is 1 or 0. 2 components that share element bindings,
+     * Whether to continue to participate in the shared element animation when the appearance element is not deleted,
+     * the default is not false, if not involved, the original position will remain unchanged. \n
+     * .string is used to set the binding relationship. Set the id to "" to
+     * clear the binding relationship to avoid participating in sharing behavior. \n
+     * The id can be changed and the binding relationship re-established.
+     * The same ID can only be bound to two components and they are in/out roles of different types.
+     * Multiple components cannot be bound to the same id. \n
+     */
     NODE_GEOMETRY_TRANSITION,
 
     /**
-      * @brief specifies the parameters of the chain formed by this component as the chain head,
-      * and supports attribute setting, attribute reset and attribute acquisition interfaces.
-      *
-      * Only takes effect when the parent container is RelativeContainer
-      *
-      * Attribute setting method parameter {@link ArkUI_AttributeItem} format: \n
-      * .value[0].i32: The direction of the chain. Enum {@link ArkUI_Axis}. \n
-      * .value[1].i32: Chain style. Enum {@link ArkUI_RelativeLayoutChainStyle}. \n
-      *\n
-      * .value[0].i32: The direction of the chain. Enum {@link ArkUI_Axis}. \n
-      * .value[1].i32: Chain style. Enum {@link ArkUI_RelativeLayoutChainStyle}. \n
-      */
+     * @brief specifies the parameters of the chain formed by this component as the chain head,
+     * and supports attribute setting, attribute reset and attribute acquisition interfaces.
+     *
+     * Only takes effect when the parent container is RelativeContainer
+     *
+     * Attribute setting method parameter {@link ArkUI_AttributeItem} format: \n
+     * .value[0].i32: The direction of the chain. Enum {@link ArkUI_Axis}. \n
+     * .value[1].i32: Chain style. Enum {@link ArkUI_RelativeLayoutChainStyle}. \n
+     *\n
+     * .value[0].i32: The direction of the chain. Enum {@link ArkUI_Axis}. \n
+     * .value[1].i32: Chain style. Enum {@link ArkUI_RelativeLayoutChainStyle}. \n
+     */
     NODE_RELATIVE_LAYOUT_CHAIN_MODE,
 
     /**
@@ -1870,7 +1871,7 @@ typedef enum {
      * @since 14
      */
     NODE_TAB_STOP = 98,
-    
+
     /**
      * @brief Defines the backdrop blur attribute, which can be set, reset, and obtained as required through APIs.
      *
@@ -2017,7 +2018,7 @@ typedef enum {
      * .value[0].u32: font color, in 0xARGB format. For example, 0xFFFF0000 indicates red.\n
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
-      * .value[0].u32: font color value, in 0xARGB format.\n
+     * .value[0].u32: font color value, in 0xARGB format.\n
      *
      */
     NODE_FONT_COLOR,
@@ -3071,8 +3072,8 @@ typedef enum {
      * The value <b>true</b> means to enable the input method, and <b>false</b> means the opposite.\n \n
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
-      * .value[0].i32: The value <b>1</b> means to enable the input method when the component obtains focus,
-      * and <b>0</b> means the opposite. \n
+     * .value[0].i32: The value <b>1</b> means to enable the input method when the component obtains focus,
+     * and <b>0</b> means the opposite. \n
      *
      */
     NODE_TEXT_INPUT_ENABLE_KEYBOARD_ON_FOCUS,
@@ -3162,139 +3163,139 @@ typedef enum {
      */
     NODE_TEXT_INPUT_TEXT_SELECTION,
     /**
-    * @brief Sets the color of the text underline when it is enabled.
-    *
-    * The default underline color configured for the theme is <b>'0x33182431'</b>.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].u32: color of the underline applied to the text being typed in.
-    * The value is in 0xARGB format. \n
-    * .value[1].u32: color of the underline applied to the text in the normal state.
-    * The value is in 0xARGB format. \n
-    * .value[2].u32: color of the underline applied to the text when an error is detected.
-    * The value is in 0xARGB format. \n
-    * .value[3].u32: color of the underline applied to the text when it is disabled.
-    * The value is in 0xARGB format. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].u32: color of the underline applied to the text being typed in. The value is in 0xARGB format. \n
-    * .value[1].u32: color of the underline applied to the text in the normal state. The value is in 0xARGB format. \n
-    * .value[2].u32: color of the underline applied to the text when an error is detected.
-    * The value is in 0xARGB format. \n
-    * .value[3].u32: color of the underline applied to the text when it is disabled. The value is in 0xARGB format. \n
-    *
-    */
+     * @brief Sets the color of the text underline when it is enabled.
+     *
+     * The default underline color configured for the theme is <b>'0x33182431'</b>.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].u32: color of the underline applied to the text being typed in.
+     * The value is in 0xARGB format. \n
+     * .value[1].u32: color of the underline applied to the text in the normal state.
+     * The value is in 0xARGB format. \n
+     * .value[2].u32: color of the underline applied to the text when an error is detected.
+     * The value is in 0xARGB format. \n
+     * .value[3].u32: color of the underline applied to the text when it is disabled.
+     * The value is in 0xARGB format. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].u32: color of the underline applied to the text being typed in. The value is in 0xARGB format. \n
+     * .value[1].u32: color of the underline applied to the text in the normal state. The value is in 0xARGB format. \n
+     * .value[2].u32: color of the underline applied to the text when an error is detected.
+     * The value is in 0xARGB format. \n
+     * .value[3].u32: color of the underline applied to the text when it is disabled. The value is in 0xARGB format. \n
+     *
+     */
     NODE_TEXT_INPUT_UNDERLINE_COLOR,
     /**
-    * @brief Sets whether to enable autofill.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: whether to enable autofill. The default value is <b>true</b>. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: whether to enable autofill. \n
-    *
-    */
+     * @brief Sets whether to enable autofill.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: whether to enable autofill. The default value is <b>true</b>. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: whether to enable autofill. \n
+     *
+     */
     NODE_TEXT_INPUT_ENABLE_AUTO_FILL,
     /**
-    * @brief Sets the autofill type.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: autofill type. The parameter type is {@link ArkUI_TextInputContentType}. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: autofill type. The parameter type is {@link ArkUI_TextInputContentType}. \n
-    *
-    */
+     * @brief Sets the autofill type.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: autofill type. The parameter type is {@link ArkUI_TextInputContentType}. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: autofill type. The parameter type is {@link ArkUI_TextInputContentType}. \n
+     *
+     */
     NODE_TEXT_INPUT_CONTENT_TYPE,
     /**
-    * @brief Defines the rules for generating passwords. When autofill is used, these rules are transparently
-    * transmitted to Password Vault for generating a new password.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .string: rules for generating passwords. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .string: rules for generating passwords. \n
-    *
-    */
+     * @brief Defines the rules for generating passwords. When autofill is used, these rules are transparently
+     * transmitted to Password Vault for generating a new password.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .string: rules for generating passwords. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .string: rules for generating passwords. \n
+     *
+     */
     NODE_TEXT_INPUT_PASSWORD_RULES,
     /**
-    * @brief Sets whether to select all text in the initial state. The inline mode is not supported.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: whether to select all text in the initial state. The default value is b>false</b>. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: whether to select all text in the initial state. \n
-    *
-    */
+     * @brief Sets whether to select all text in the initial state. The inline mode is not supported.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: whether to select all text in the initial state. The default value is b>false</b>. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: whether to select all text in the initial state. \n
+     *
+     */
     NODE_TEXT_INPUT_SELECT_ALL,
     /**
-    * @brief Sets the regular expression for input filtering.
-    * Only inputs that comply with the regular expression can be displayed.
-    * Other inputs are filtered out. The specified regular expression can match single characters,
-    * but not strings.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .string: regular expression. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .string: regular expression. \n
-    *
-    */
+     * @brief Sets the regular expression for input filtering.
+     * Only inputs that comply with the regular expression can be displayed.
+     * Other inputs are filtered out. The specified regular expression can match single characters,
+     * but not strings.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .string: regular expression. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .string: regular expression. \n
+     *
+     */
     NODE_TEXT_INPUT_INPUT_FILTER,
     /**
-    * @brief Sets the text box to the default style or inline input style.
-    *
-    * For the inline input style, only <b>InputType.Normal</b> is supported.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: text input style. The parameter type is {@link ArkUI_TextInputStyle}. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: text input style. The parameter type is {@link ArkUI_TextInputStyle}. \n
-    *
-    */
+     * @brief Sets the text box to the default style or inline input style.
+     *
+     * For the inline input style, only <b>InputType.Normal</b> is supported.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: text input style. The parameter type is {@link ArkUI_TextInputStyle}. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: text input style. The parameter type is {@link ArkUI_TextInputStyle}. \n
+     *
+     */
     NODE_TEXT_INPUT_STYLE,
     /**
-    * @brief Sets or obtains the caret position.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * In the case of setting the caret position:
-    * .value[0].i32: character count from the beginning of a string to the caret position. \n
-    * 
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * In the case of obtaining the caret position: If this API is called when the caret position is updated in the
-    * current frame, it will not take effect.
-    * .value[0].i32: index of the caret position. \n
-    * .value[1].f32: X coordinate of the caret relative to the text box. \n
-    * .value[2].f32: Y coordinate of the caret relative to the text box. \n
-    */
+     * @brief Sets or obtains the caret position.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * In the case of setting the caret position:
+     * .value[0].i32: character count from the beginning of a string to the caret position. \n
+     *
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * In the case of obtaining the caret position: If this API is called when the caret position is updated in the
+     * current frame, it will not take effect.
+     * .value[0].i32: index of the caret position. \n
+     * .value[1].f32: X coordinate of the caret relative to the text box. \n
+     * .value[2].f32: Y coordinate of the caret relative to the text box. \n
+     */
     NODE_TEXT_INPUT_CARET_OFFSET,
     /**
-    * @brief Obtains the position of the edited text area relative to the component and its size.
-    * 
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].f32: horizontal coordinate. \n
-    * .value[1].f32: vertical coordinate. \n
-    * .value[2].f32: content width. \n
-    * .value[3].f32: content height. \n
-    *
-    */
+     * @brief Obtains the position of the edited text area relative to the component and its size.
+     *
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].f32: horizontal coordinate. \n
+     * .value[1].f32: vertical coordinate. \n
+     * .value[2].f32: content width. \n
+     * .value[3].f32: content height. \n
+     *
+     */
     NODE_TEXT_INPUT_CONTENT_RECT,
     /**
-    * @brief Obtains the number of lines of the edited text.
-    * 
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: number of lines of the edited text. \n
-    *
-    */
+     * @brief Obtains the number of lines of the edited text.
+     *
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: number of lines of the edited text. \n
+     *
+     */
     NODE_TEXT_INPUT_CONTENT_LINE_COUNT,
     /**
      * @brief Sets whether to hide the text selection menu when the text box is long-pressed, double-click, or
      * right-clicked. This attribute can be set, reset, and obtained as required through APIs.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].i32: whether to hide the text selection menu when the text box is long-pressed, double-click, or
      * right-clicked. The default value is <b>false</b>. \n
@@ -3407,16 +3408,16 @@ typedef enum {
     NODE_TEXT_INPUT_HALF_LEADING = 7034,
 
     /**
-    * @brief Set the keyboard style of textInput
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}：\n
-    * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
-    *
-    * @since 15
-    */
+     * @brief Set the keyboard style of textInput
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}：\n
+     * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
+     *
+     * @since 15
+     */
     NODE_TEXT_INPUT_KEYBOARD_APPEARANCE = 7035,
 
     /**
@@ -3430,8 +3431,8 @@ typedef enum {
      *
      * @since 20
      */
-     NODE_TEXT_INPUT_ENABLE_FILL_ANIMATION = 7036,
-     
+    NODE_TEXT_INPUT_ENABLE_FILL_ANIMATION = 7036,
+
     /**
      * @brief Set the line height of the input node.
      * This attribute can be set, reset, and obtained as required through APIs.
@@ -3559,6 +3560,10 @@ typedef enum {
      * when the number of characters that have been entered is greater than the maximum number of characters multiplied
      * by the threshold percentage value. The value range is 1 to 100. If the value is a decimal, it is rounded down. \n
      * .value[2]?.i32: whether to highlight the border when the number of entered characters reaches the maximum. \n
+     * * value[3].u32: Set the text color of the character counter.The corresponding color is displayed when the
+     * color is set and the default value is displayed when the color is not set \n
+     * .value[4].u32: Sets the text color of the character counter when it overflows.The corresponding color is
+     * displayed when the color is set and the default value is displayed when the color is not set \n
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].i32: whether to show a character counter. \n
@@ -3567,7 +3572,8 @@ typedef enum {
      * by the threshold percentage value. The value range is 1 to 100. \n
      * .value[2].i32: whether to highlight the border when the number of entered characters reaches the maximum.
      * The default value is <b>true</b>. \n
-     *
+     * .value[3].u32: Set the text color of the character counter. \n
+     * .value[4].u32: Sets the text color of the character counter when it overflows. \n
      */
     NODE_TEXT_AREA_SHOW_COUNTER,
     /**
@@ -3586,7 +3592,7 @@ typedef enum {
     NODE_TEXT_AREA_SELECTION_MENU_HIDDEN,
     /**
      * @brief Sets whether the multi-line text box loses focus after the Enter key is pressed to submit information.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].i32: whether the text box loses focus. \n
      * \n
@@ -3663,7 +3669,7 @@ typedef enum {
     NODE_TEXT_AREA_CARET_OFFSET,
     /**
      * @brief Obtains the position of the edited text area relative to the component and its size.
-     * 
+     *
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].f32: horizontal coordinate. \n
      * .value[1].f32: vertical coordinate. \n
@@ -3674,7 +3680,7 @@ typedef enum {
     NODE_TEXT_AREA_CONTENT_RECT,
     /**
      * @brief Obtains the number of lines of the edited text.
-     * 
+     *
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].i32: number of lines of the edited text. \n
      *
@@ -3782,16 +3788,16 @@ typedef enum {
     NODE_TEXT_AREA_HALF_LEADING = 8025,
 
     /**
-    * @brief Set the keyboard style of textArea
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}：\n
-    * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
-    *
-    * @since 15
-    */
+     * @brief Set the keyboard style of textArea
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}：\n
+     * .value[0].i32：keyboard style，the parameter type is {@link ArkUI_KeyboardAppearanceType}。\n
+     *
+     * @since 15
+     */
     NODE_TEXT_AREA_KEYBOARD_APPEARANCE = 8026,
 
     /**
@@ -3820,20 +3826,20 @@ typedef enum {
      */
     NODE_TEXT_AREA_LINE_SPACING = 8028,
 
-	/**
-    * @brief Set the min lines of the node. This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: min lines count.
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}: \n
-    * .value[0].i32: min line count.\n
-    *
-    * @since 20
-    * 
-    */
-   NODE_TEXT_AREA_MIN_LINES = 8029,
- 
+    /**
+     * @brief Set the min lines of the node. This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: min lines count.
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}: \n
+     * .value[0].i32: min line count.\n
+     *
+     * @since 20
+     *
+     */
+    NODE_TEXT_AREA_MIN_LINES = 8029,
+
     /**
      * @brief Set the max lines of the node with scroll.
      * This attribute can be set, reset, and obtained as required through APIs.
@@ -3846,7 +3852,7 @@ typedef enum {
      *
      * @since 20
      */
-   NODE_TEXT_AREA_MAX_LINES_WITH_SCROLL = 8030,
+    NODE_TEXT_AREA_MAX_LINES_WITH_SCROLL = 8030,
 
     /**
      * @brief Set the line height of the node. This attribute can be set, reset, and obtained as required through APIs.
@@ -3888,29 +3894,29 @@ typedef enum {
     NODE_BUTTON_TYPE,
 
     /**
-    * @brief Defines the minimum font scale attribute, which can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].f32: minimum font scale, in fp.
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].f32: minimum font scale, in fp.
-    *
-    * @since 18
-    */
+     * @brief Defines the minimum font scale attribute, which can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].f32: minimum font scale, in fp.
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].f32: minimum font scale, in fp.
+     *
+     * @since 18
+     */
     NODE_BUTTON_MIN_FONT_SCALE,
 
     /**
-    * @brief Defines the maximum font scale attribute, which can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].f32: maximum font scale, in fp.
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].f32: maximum font scale, in fp.
-    *
-    * @since 18
-    */
+     * @brief Defines the maximum font scale attribute, which can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].f32: maximum font scale, in fp.
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].f32: maximum font scale, in fp.
+     *
+     * @since 18
+     */
     NODE_BUTTON_MAX_FONT_SCALE,
 
     /**
@@ -3987,7 +3993,7 @@ typedef enum {
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].i32: The value <b>1</b> means that the check box is selected, and <b>0</b> means the opposite. \n
-     * 
+     *
      */
     NODE_CHECKBOX_SELECT = MAX_NODE_SCOPE_NUM * ARKUI_NODE_CHECKBOX,
 
@@ -4013,7 +4019,7 @@ typedef enum {
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].u32: border color, in 0xARGB format, for example, <b>0xFF1122FF</b>.
-     * 
+     *
      */
     NODE_CHECKBOX_UNSELECT_COLOR,
 
@@ -4305,7 +4311,7 @@ typedef enum {
      *
      * @since 20
      */
-     NODE_DATE_PICKER_CAN_LOOP = 13009,
+    NODE_DATE_PICKER_CAN_LOOP = 13009,
     /**
      * @brief Defines the time of the selected item. in the timer picker.
      * This attribute can be set, reset, and obtained as required through APIs.
@@ -4403,7 +4409,7 @@ typedef enum {
      *
      */
     NODE_TIME_PICKER_SELECTED_TEXT_STYLE,
-     /**
+    /**
      * @brief Defines the start time of the time picker.
      * This attribute can be set, reset, and obtained as required through APIs.
      *
@@ -4824,7 +4830,7 @@ typedef enum {
      * .string?: depending on the shape. Optional. \n
      * ARKUI_SLIDER_BLOCK_STYLE_IMAGE: image resource of the slider. Example: /pages/common/icon.png. \n
      * ARKUI_SLIDER_BLOCK_STYLE_SHAPE: custom shape of the slider. \n
-      * There are five types:\n
+     * There are five types:\n
      * 1. Rectangle:\n
      * .value[1].i32: type of shape. The parameter type is {@link ArkUI_ShapeType}.
      * The value is <b>ARKUI_SHAPE_TYPE_RECTANGLE</b> for the rectangle shape.\n
@@ -4985,8 +4991,8 @@ typedef enum {
      *
      * The prefix component will be placed at the start position of the Slider，
      * typically on the left side in LTR layouts.
-	 *
-	 * @since 20
+     *
+     * @since 20
      */
     NODE_SLIDER_PREFIX,
 
@@ -4998,8 +5004,8 @@ typedef enum {
      *
      * The suffix component will be placed at the end position of the Slider,
      * typically on the right side in LTR layouts.
-	 *
-	 * @since 20
+     *
+     * @since 20
      */
     NODE_SLIDER_SUFFIX,
 
@@ -5068,7 +5074,7 @@ typedef enum {
      * .size: number of the images.\n
      * .object: array of the images, the type is {@ArkUI_ImageAnimatorFrameInfo} array.\n
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_IMAGES = ARKUI_NODE_IMAGE_ANIMATOR * MAX_NODE_SCOPE_NUM,
     /**
      * @brief Set the playback status of the animation for the image animator.
@@ -5081,7 +5087,7 @@ typedef enum {
      * Attribute obtaining method return value {@Link ArkUI_AttributeItem} format:\n
      * .value[0].i32: the playback status of the animation, the type is {@link ArkUI_AnimationStatus}.\n
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_STATE = 19001,
     /**
      * @brief Set the playback duration for the image animator. When the duration is 0, no image is played.
@@ -5095,7 +5101,7 @@ typedef enum {
      * Attribute obtaining method return value {@Link ArkUI_AttributeItem} format:\n
      * .value[0].i32: the playback duration, the unit is ms.\n
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_DURATION = 19002,
     /**
      * @brief Set the playback direction for the image animator.
@@ -5109,7 +5115,7 @@ typedef enum {
      * .value[0].i32: the playback direction. 0 indicates that images are played from the first one to the last one,
      * and 1 indicates that images are played from the last one to the first one.\n
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_REVERSE = 19003,
     /**
      * @brief Set whether the image size is the same as the component size.
@@ -5127,7 +5133,7 @@ typedef enum {
      * 1 indicates the image size is the same as the component size.
      * 0 indicates the image size is customized.
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_FIXED_SIZE = 19004,
     /**
      * @brief Set the status before and after execution of the animation in the current playback direction.
@@ -5141,7 +5147,7 @@ typedef enum {
      * .value[0].i32: the status before and after execution of the animation in the current playback direction,
      * the type is {ArkUI_AnimationFillMode}.
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_FILL_MODE = 19005,
     /**
      * @brief Set the number of times that the animation is played.
@@ -5153,7 +5159,7 @@ typedef enum {
      * Attribute setting method {@Link ArkUI_AttributeItem} Parameter format:\n
      * .value[0].i32: the number of times that the animation is played.\n
      *
-    */
+     */
     NODE_IMAGE_ANIMATOR_ITERATION = 19006,
 
     /**
@@ -5165,10 +5171,10 @@ typedef enum {
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .string: component name. \n
-     * 
+     *
      * @since 15
      */
-    NODE_CHECKBOX_GROUP_NAME  = MAX_NODE_SCOPE_NUM * ARKUI_NODE_CHECKBOX_GROUP,
+    NODE_CHECKBOX_GROUP_NAME = MAX_NODE_SCOPE_NUM * ARKUI_NODE_CHECKBOX_GROUP,
 
     /**
      * @brief Defines whether the checkboxgroup is selected.
@@ -5180,7 +5186,7 @@ typedef enum {
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].i32: The value <b>1</b> means that the checkboxgroup is selected, and <b>0</b> means the opposite. \n
-     * 
+     *
      * @since 15
      */
     NODE_CHECKBOX_GROUP_SELECT_ALL,
@@ -5208,7 +5214,7 @@ typedef enum {
      * \n
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].u32: border color, in 0xARGB format, for example, <b>0xFF1122FF</b>.
-     * 
+     *
      * @since 15
      */
     NODE_CHECKBOX_GROUP_UNSELECTED_COLOR,
@@ -5461,7 +5467,7 @@ typedef enum {
 
     /**
      * @brief Scroll to the next or previous page.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].i32 Indicates whether to scroll to next page. Value 0 indicates scroll to next page and value 1
      * indicates scroll to previous page. \n
@@ -5472,7 +5478,7 @@ typedef enum {
 
     /**
      * @brief Scroll a specified distance.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].f32：Horizontal scrolling distance in vp; \n
      * .value[1].f32: Vertical scrolling distance in vp; \n
@@ -5482,7 +5488,7 @@ typedef enum {
 
     /**
      * @brief Performs inertial scrolling based on the initial velocity passed in.
-     * 
+     *
      * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
      * .value[0].f32: Initial velocity of inertial scrolling. Unit: vp/s. If the value specified is 0, it is
      * considered as invalid, and the scrolling for this instance will not take effect. If the value is positive,
@@ -5493,20 +5499,20 @@ typedef enum {
     NODE_SCROLL_FLING,
 
     /**
-    * @brief Sets the fading effect for the edges of scrollable components.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:
-    * .value[0].i32: whether to enable the fading effect on edges. The value 0 means to disable the fading effect,
-    * and 1 means to enable it.
-    * .value[1]?.f32: length of the fading effect on edges, in vp. Default value: 32.
-    *
-    * Format of the return value {@link ArkUI_AttributeItem}:
-    * .value[0].i32: whether the fading effect on edges is enabled. The value 0 means that the fading effect is
-    * disabled, and 1 means that it is enabled.
-    * .value[1].f32: length of the fading effect on edges, in vp.
-    *
-    * @since 14
-    */
+     * @brief Sets the fading effect for the edges of scrollable components.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:
+     * .value[0].i32: whether to enable the fading effect on edges. The value 0 means to disable the fading effect,
+     * and 1 means to enable it.
+     * .value[1]?.f32: length of the fading effect on edges, in vp. Default value: 32.
+     *
+     * Format of the return value {@link ArkUI_AttributeItem}:
+     * .value[0].i32: whether the fading effect on edges is enabled. The value 0 means that the fading effect is
+     * disabled, and 1 means that it is enabled.
+     * .value[1].f32: length of the fading effect on edges, in vp.
+     *
+     * @since 14
+     */
     NODE_SCROLL_FADING_EDGE,
 
     /**
@@ -5706,11 +5712,11 @@ typedef enum {
      */
     NODE_LIST_SPACE,
     /**
-    * @brief Defines the list adapter. The attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
-    */
+     * @brief Defines the list adapter. The attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
+     */
     NODE_LIST_NODE_ADAPTER,
 
     /**
@@ -5732,7 +5738,7 @@ typedef enum {
 
     /**
      * @brief Scroll to the specified index.
-     * 
+     *
      * When activating the smooth animation, all items passed through will be loaded and layout calculated, which can
      * lead to performance issues when loading a large number of items.\n
      * \n
@@ -5759,7 +5765,7 @@ typedef enum {
      * Format of the return value {@link ArkUI_AttributeItem}:\n
      * .value[0].i32: alignment mode of list items along the cross axis.
      * The parameter type is {@link ArkUI_ListItemAlignment}. \n
-    */
+     */
     NODE_LIST_ALIGN_LIST_ITEM,
 
     /**
@@ -5891,7 +5897,7 @@ typedef enum {
      * @since 19
      */
     NODE_LIST_STACK_FROM_END = 1003014,
-    
+
     /**
      * @brief Defines the focus wrap mode for the <b>List</b> component.
      * This attribute can be set, reset, and obtained as required through APIs.
@@ -6059,22 +6065,22 @@ typedef enum {
     NODE_SWIPER_INDEX,
 
     /**
-    * @brief Defines the number of elements to display per page.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: number of elements to display per page. \n
-    * .value[1]?.i32: whether to turn pages by group. The value <b>0</b> means to turn pages by child element,
-    * and <b>1</b> means to turn pages by group. This parameter is supported since API version 19. \n
-    * .string?: this parameter can only be set to 'auto'. When 'auto' is set, the value[] parameters are ignored.
-    * This parameter is supported since API version 19. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: number of elements to display per page. \n
-    * .value[1].i32: whether to turn pages by group. This parameter is supported since API version 19. \n
-    * .string: 'auto' or empty string.
-    *
-    */
+     * @brief Defines the number of elements to display per page.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: number of elements to display per page. \n
+     * .value[1]?.i32: whether to turn pages by group. The value <b>0</b> means to turn pages by child element,
+     * and <b>1</b> means to turn pages by group. This parameter is supported since API version 19. \n
+     * .string?: this parameter can only be set to 'auto'. When 'auto' is set, the value[] parameters are ignored.
+     * This parameter is supported since API version 19. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: number of elements to display per page. \n
+     * .value[1].i32: whether to turn pages by group. This parameter is supported since API version 19. \n
+     * .string: 'auto' or empty string.
+     *
+     */
     NODE_SWIPER_DISPLAY_COUNT,
 
     /**
@@ -6093,24 +6099,24 @@ typedef enum {
     NODE_SWIPER_DISABLE_SWIPE,
 
     /**
-    * @brief Defines whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
-    * The parameter type is {@link ArkUI_SwiperArrow}.\n
-    * The default value is <b>ARKUI_SWIPER_ARROW_HIDE</b>. \n
-    * .?object: arrow style. The parameter type is {@link ArkUI_SwiperArrowStyle}. \n
-    * This parameter is supported since API version 19. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
-    * The parameter type is {@link ArkUI_SwiperArrow}.\n
-    * The default value is <b>ARKUI_SWIPER_ARROW_HIDE</b>. \n
-    * .object: arrow style. The parameter type is {@link ArkUI_SwiperArrowStyle}. \n
-    * This parameter is supported since API version 19. \n
-    *
-    */
+     * @brief Defines whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
+     * The parameter type is {@link ArkUI_SwiperArrow}.\n
+     * The default value is <b>ARKUI_SWIPER_ARROW_HIDE</b>. \n
+     * .?object: arrow style. The parameter type is {@link ArkUI_SwiperArrowStyle}. \n
+     * This parameter is supported since API version 19. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: whether to show the arrow when the mouse pointer hovers over the navigation point indicator.
+     * The parameter type is {@link ArkUI_SwiperArrow}.\n
+     * The default value is <b>ARKUI_SWIPER_ARROW_HIDE</b>. \n
+     * .object: arrow style. The parameter type is {@link ArkUI_SwiperArrowStyle}. \n
+     * This parameter is supported since API version 19. \n
+     *
+     */
     NODE_SWIPER_SHOW_DISPLAY_ARROW,
 
     /**
@@ -6130,28 +6136,28 @@ typedef enum {
     NODE_SWIPER_EDGE_EFFECT_MODE,
 
     /**
-    * @brief Defines the swiper adapter. The attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
-    */
+     * @brief Defines the swiper adapter. The attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
+     */
     NODE_SWIPER_NODE_ADAPTER,
 
     /**
-    * @brief Sets the number of cached items in the swiper adapter.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: number of cached items in the swiper adapter. \n
-    * .value[1]?.i32: whether the cached items will be displayed. \n
-    * The value <b>0</b> indicates that cached items will not be displayed, \n
-    * and <b>1</b> indicates that cached nodes will be displayed. The default value is <b>0</b>. \n
-    * This parameter is supported from API version 19. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: number of cached items in the swiper adapter. \n
-    * .value[1].i32: whether the cached items will be displayed. This parameter is supported from API version 19. \n
-    */
+     * @brief Sets the number of cached items in the swiper adapter.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: number of cached items in the swiper adapter. \n
+     * .value[1]?.i32: whether the cached items will be displayed. \n
+     * The value <b>0</b> indicates that cached items will not be displayed, \n
+     * and <b>1</b> indicates that cached nodes will be displayed. The default value is <b>0</b>. \n
+     * This parameter is supported from API version 19. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: number of cached items in the swiper adapter. \n
+     * .value[1].i32: whether the cached items will be displayed. This parameter is supported from API version 19. \n
+     */
     NODE_SWIPER_CACHED_COUNT,
 
     /**
@@ -6185,24 +6191,24 @@ typedef enum {
     NODE_SWIPER_NEXT_MARGIN,
 
     /**
-    * @brief Defines the navigation indicator type of the swiper.
-    * The attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: navigation indicator type, the parameter type is {@link ArkUI_SwiperIndicatorType}.\n
-    * .object: The parameter type is {@link ArkUI_SwiperIndicator} when the indicator type \n
-    * is <b>ARKUI_SWIPER_INDICATOR_TYPE_DOT</b>. The parameter type is {@link ArkUI_SwiperDigitIndicator}
-    * when the indicator type is <b>ARKUI_SWIPER_INDICATOR_TYPE_DIGIT</b>. \n
-    * {@link ArkUI_SwiperDigitIndicator} is supported since API version 19. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: navigation indicator type, the parameter type is {@link ArkUI_SwiperIndicatorType}.\n
-    * .object: The parameter type is {@link ArkUI_SwiperIndicator} when the indicator type \n
-    * is <b>ARKUI_SWIPER_INDICATOR_TYPE_DOT</b>. The parameter type is {@link ArkUI_SwiperDigitIndicator}
-    * when the indicator type is <b>ARKUI_SWIPER_INDICATOR_TYPE_DIGIT</b>. \n
-    * {@link ArkUI_SwiperDigitIndicator} is supported since API version 19. \n
-    *
-    */
+     * @brief Defines the navigation indicator type of the swiper.
+     * The attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: navigation indicator type, the parameter type is {@link ArkUI_SwiperIndicatorType}.\n
+     * .object: The parameter type is {@link ArkUI_SwiperIndicator} when the indicator type \n
+     * is <b>ARKUI_SWIPER_INDICATOR_TYPE_DOT</b>. The parameter type is {@link ArkUI_SwiperDigitIndicator}
+     * when the indicator type is <b>ARKUI_SWIPER_INDICATOR_TYPE_DIGIT</b>. \n
+     * {@link ArkUI_SwiperDigitIndicator} is supported since API version 19. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: navigation indicator type, the parameter type is {@link ArkUI_SwiperIndicatorType}.\n
+     * .object: The parameter type is {@link ArkUI_SwiperIndicator} when the indicator type \n
+     * is <b>ARKUI_SWIPER_INDICATOR_TYPE_DOT</b>. The parameter type is {@link ArkUI_SwiperDigitIndicator}
+     * when the indicator type is <b>ARKUI_SWIPER_INDICATOR_TYPE_DIGIT</b>. \n
+     * {@link ArkUI_SwiperDigitIndicator} is supported since API version 19. \n
+     *
+     */
     NODE_SWIPER_INDICATOR,
 
     /**
@@ -6230,14 +6236,14 @@ typedef enum {
     NODE_SWIPER_SWIPE_TO_INDEX,
 
     /**
-    * @brief Set to disable component navigation point interaction function。
-    *
-    * Property setting method parameter {@link ArkUI-AttributeItem} format: \n
-    * .value[0].i32：Set to disable the interaction function of component navigation points. When set to true, it
-    * indicates that the navigation points are interactive. The default value is true. \n
-    * The return value of the attribute acquisition method is in the format of {@ link ArkUI-AttributeItem}： \n
-    * .value[0].i32：Set to disable component navigation point interaction. \n
-    */
+     * @brief Set to disable component navigation point interaction function。
+     *
+     * Property setting method parameter {@link ArkUI-AttributeItem} format: \n
+     * .value[0].i32：Set to disable the interaction function of component navigation points. When set to true, it
+     * indicates that the navigation points are interactive. The default value is true. \n
+     * The return value of the attribute acquisition method is in the format of {@ link ArkUI-AttributeItem}： \n
+     * .value[0].i32：Set to disable component navigation point interaction. \n
+     */
     NODE_SWIPER_INDICATOR_INTERACTIVE,
 
     /**
@@ -6356,17 +6362,17 @@ typedef enum {
     NODE_LIST_ITEM_GROUP_CHILDREN_MAIN_SIZE = 1005003,
 
     /**
-    * @brief Defines the list item group adapter.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .object: {@link ArkUI_NodeAdapter} object. \n
-    *
-    * @since 15
-    */
+     * @brief Defines the list item group adapter.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .object: {@link ArkUI_NodeAdapter} object. \n
+     *
+     * @since 15
+     */
     NODE_LIST_ITEM_GROUP_NODE_ADAPTER = 1005004,
 
     /**
@@ -6620,27 +6626,27 @@ typedef enum {
     NODE_WATER_FLOW_SECTION_OPTION,
 
     /**
-    * @brief Defines the water flow adapter. The attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
-    */
+     * @brief Defines the water flow adapter. The attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
+     */
     NODE_WATER_FLOW_NODE_ADAPTER,
 
     /**
-    * @brief Sets the number of cached items in the water flow adapter.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * value[0].i32：number of cached items in the water flow adapter. \n
-    * .value[1]?.i32：whether to the cached items will be displayed, 0: not displayed, 1: displayed, default value: 0.
-    * This parameter is supported since API version 16. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: number of cached items in the water flow adapter. \n
-    * .value[1].i32: whether to the cached items will be displayed, 0: not displayed, 1: displayed, default value: 0.
-    * This parameter is supported since API version 16. \n
-    */
+     * @brief Sets the number of cached items in the water flow adapter.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * value[0].i32：number of cached items in the water flow adapter. \n
+     * .value[1]?.i32：whether to the cached items will be displayed, 0: not displayed, 1: displayed, default value: 0.
+     * This parameter is supported since API version 16. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: number of cached items in the water flow adapter. \n
+     * .value[1].i32: whether to the cached items will be displayed, 0: not displayed, 1: displayed, default value: 0.
+     * This parameter is supported since API version 16. \n
+     */
     NODE_WATER_FLOW_CACHED_COUNT,
 
     /**
@@ -6654,7 +6660,7 @@ typedef enum {
 
     /**
      * @brief Scroll to the specified index.
-     * 
+     *
      * When activating the smooth animation, all items passed through will be loaded and layout calculated, which can
      * lead to performance issues when loading a large number of items.\n
      * \n
@@ -6805,36 +6811,36 @@ typedef enum {
     NODE_GRID_ROW_GAP,
 
     /**
-    * @brief Defines the grid adapter. The attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
-    */
+     * @brief Defines the grid adapter. The attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .object: {@link ArkUI_NodeAdapter} object as the adapter. \n
+     */
     NODE_GRID_NODE_ADAPTER,
 
     /**
-    * @brief Sets the number of cached items in the grid adapter.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: number of cached items in the grid adapter. \n
-    */
+     * @brief Sets the number of cached items in the grid adapter.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: number of cached items in the grid adapter. \n
+     */
     NODE_GRID_CACHED_COUNT,
 
     /**
-    * @brief Defines the focus wrap mode for the <b>Grid</b> component.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].i32: focus wrap mode of the <b>Grid</b> component.
-    *                The parameter type is {@link ArkUI_FocusWrapMode}. \n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * .value[0].i32: focus wrap mode of the <b>Grid</b> component.
-    *                The parameter type is {@link ArkUI_FocusWrapMode}. \n
-    *
-    * @since 20
-    */
+     * @brief Defines the focus wrap mode for the <b>Grid</b> component.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].i32: focus wrap mode of the <b>Grid</b> component.
+     *                The parameter type is {@link ArkUI_FocusWrapMode}. \n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * .value[0].i32: focus wrap mode of the <b>Grid</b> component.
+     *                The parameter type is {@link ArkUI_FocusWrapMode}. \n
+     *
+     * @since 20
+     */
     NODE_GRID_FOCUS_WRAP_MODE = 1013006,
 
     /**
@@ -6854,25 +6860,25 @@ typedef enum {
     NODE_GRID_SYNC_LOAD = 1013007,
 
     /**
-    * @brief Defines the column width of the text picker.
-    * This attribute can be set, reset, and obtained as required through APIs.
-    *
-    * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
-    * .value[0].f32: percentage of total width. The default value is that all colulmns are equal width.\n
-    * .value[1]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
-    * .value[2]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
-    * ...\n
-    * .value[n]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
-    * \n
-    * Format of the return value {@link ArkUI_AttributeItem}:\n
-    * value[0].f32: percentage of total width.\n
-    * value[1].f32: percentage of total width.\n
-    * value[2].f32: percentage of total width.\n
-    * ...\n
-    * value[n].f32: percentage of total width.\n
-    *
-    * @since 18
-    */
+     * @brief Defines the column width of the text picker.
+     * This attribute can be set, reset, and obtained as required through APIs.
+     *
+     * Format of the {@link ArkUI_AttributeItem} parameter for setting the attribute:\n
+     * .value[0].f32: percentage of total width. The default value is that all colulmns are equal width.\n
+     * .value[1]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
+     * .value[2]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
+     * ...\n
+     * .value[n]?.f32: percentage of total width. The default value is that all colulmns are equal width.\n
+     * \n
+     * Format of the return value {@link ArkUI_AttributeItem}:\n
+     * value[0].f32: percentage of total width.\n
+     * value[1].f32: percentage of total width.\n
+     * value[2].f32: percentage of total width.\n
+     * ...\n
+     * value[n].f32: percentage of total width.\n
+     *
+     * @since 18
+     */
     NODE_TEXT_PICKER_COLUMN_WIDTHS = 15009,
     /**
      * @brief Defines the disabled date range of the calendar picker.