diff --git a/docs/Advanced_development/zh/QuecPythonBus/ExtInt.md b/docs/Advanced_development/zh/QuecPythonBus/ExtInt.md
new file mode 100644
index 0000000000000000000000000000000000000000..8212f411d32600013ac5fbdc48a1e56c33d2395b
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/ExtInt.md
@@ -0,0 +1,58 @@
+# 外部中断实验
+
+## 修订历史
+
+| 版本 | 日期       | 作者    | 变更表述 |
+| ---- | ---------- | ------- | -------- |
+| 1.0  | 2021-09-22 | Grey.Tu | 初版     |
+
+文档主要介绍如何实现 ExtInt 检测外部中断，从硬件设计和软件设计两方面讲解，通过阅读本文，您将学会 ExtInt 外部中断功能使用。
+
+有关API详解请参考 [QuecPython-machine - ExtInt](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=extint)
+
+
+
+## 硬件设计
+
+ExtInt 外部中断原理为检测 PIN 脚外部电平转变，既 PIN 脚上有上升沿或下降沿信号。
+
+![media_ExtInt_1](media/media_ExtInt_1.jpg)
+
+原理图与按键原理图类似：
+
+![media_ExtInt_2](media/media_ExtInt_2.jpg)
+
+## 软件设计
+
+首先确定要控制硬件的哪个引脚，然后通过官网的 API 类库找到对应的 GPIO 编号 。详解请参考  [QuecPython-machine - ExtInt](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=extint)
+
+例： ![media_ExtInt_3](media/media_ExtInt_3.jpg)EC600S/N的引脚10为GPIO1。
+
+开始编写代码，选择对应的 GPIO 进行 ExtInt 外部中断初始化：
+
+```python
+from machine import ExtInt
+
+
+def callback(args):
+    print('interrupt: {}'.format(args))
+
+
+extint13 = ExtInt(ExtInt.GPIO13, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, callback)  # 创建对象
+extint12 = ExtInt(ExtInt.GPIO12, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, callback)  # 创建对象
+extint13.enable()  # 使能中断
+extint12.enable()  # 使能中断
+print('开启GPIO: {}中断. \r\n'.format(extint13.line()))
+print('开启GPIO: {}中断. \r\n'.format(extint12.line()))
+
+# extint13.disable()  # 关闭中断
+# extint12.disable()  # 关闭中断
+```
+
+配套代码
+
+## 配套代码
+
+<!-- * [下载代码](code/code_ExtInt.py) -->
+ <a href="code/code_ExtInt.py" target="_blank">下载代码</a>
+
diff --git a/docs/Advanced_development/zh/QuecPythonBus/button.md b/docs/Advanced_development/zh/QuecPythonBus/button.md
new file mode 100644
index 0000000000000000000000000000000000000000..acfec324500112026c303a12032867fa95005da6
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/button.md
@@ -0,0 +1,68 @@
+# 按键输入实验
+
+## 修订历史
+
+| 版本 | 日期       | 作者 | 变更表述 |
+| ---- | ---------- | ---- | -------- |
+| 1.0  | 2021-09-17 | Grey | 初版     |
+
+文档主要介绍如何实现检测 GPIO 电平，从硬件设计和软件设计两方面讲解，通过阅读本文，您将学会查看硬件连接关系、代码编写思路和验证实验理论。
+
+有关API详解请参考 [QuecPython-machine - PIN](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pin)
+
+
+
+## 硬件资源 
+
+EC600x 开发板引出了两个 PIN 脚供客户实验按键输入实验。
+
+我们配置对应 GPIO 为上拉输入模式便可以通过按而不按按键改变 GPIO的电平。
+
+![media_button_1](media/media_button_1.jpg)
+
+
+
+## 软件设计
+
+首先确定要检测的硬件引脚是那一个 GPIO ，我们通过官网的 API 类库找到对应的 GPIO编号 。详解请参考 [QuecPython-machine - PIN](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pin)
+
+例： ![media_button_2](media/media_button_2.jpg)EC600S/N的引脚10为GPIO1。
+
+而我们 EC600x 开发板两个按键 PIN59/PIN60，对应EC600S/N为：PIN59 => GPIO12；PIN60 => GPIO13。对应EC600U为：PIN60 => GPIO4；PIN59 无对应 GPIO，不能进行按键输入检测。这边我们实现一个按键的按键检测功能。
+
+### 代码实现 
+
+```python
+import utime
+from machine import Pin
+
+
+if __name__ == '__main__':
+    gpio13 = Pin(Pin.GPIO13, Pin.IN, Pin.PULL_PU, 1)  # EC600S/N开发板使用
+    # gpio13 = Pin(Pin.GPIO4, Pin.IN, Pin.PULL_PU, 1)  # EC600U开发板使用
+    while True:
+        if gpio13.read() == 0:
+            utime.sleep_ms(10)
+            if gpio13.read() == 0:
+                while gpio13.read() == 0:
+                    pass
+                print("GPIO13按下")
+        pass
+```
+
+
+
+## 下载验证
+
+下载.py 文件到模组运行：
+
+![media_button_3](media/media_button_3.jpg)
+
+下载之后，按下按键，便会有信息打印：
+
+![media_button_4](media/media_button_4.jpg)
+
+## 配套代码
+
+<!-- * [下载代码](code/code_button.py) -->
+  <a href="code/code_button.py" target="_blank">下载代码</a>
\ No newline at end of file
diff --git a/docs/Advanced_development/zh/QuecPythonBus/buzzer.md b/docs/Advanced_development/zh/QuecPythonBus/buzzer.md
new file mode 100644
index 0000000000000000000000000000000000000000..f290fe779ca867c73094f053d4dc77f54dc2a5a7
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/buzzer.md
@@ -0,0 +1,137 @@
+# 蜂鸣器实验
+
+## 修订历史
+
+| 版本 | 日期 | 作者 | 变更表述 |
+|------|------|------|------|
+| 1.0 | 2021-03-20 | gary.zhou | 初版 |
+| 1.1 | 2021-09-15 | Grey.Tu | 修改有缘蜂鸣器绘制为无缘蜂鸣器控绘制. |
+
+文档主要介绍如何 PWM 控制 **无缘蜂鸣器** ，使 **无缘蜂鸣器** 发声。从硬件设计和软件设计两方面讲解，通过阅读本文，可以学习 PWM 基本使用。
+
+有关 API 详解请参考 [QuecPython-misc - PWM](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pwm)
+
+
+
+## 硬件描述
+
+蜂鸣器分为 **有源蜂鸣器** 与 **无源蜂鸣器** 两种。 **有缘蜂鸣器** 直接供电就会发声，控制如同 LED ，控制引脚输出高低电平即可。硬件电路也与 LED 电路类似。 有关驱动请参考 LED 控制章节。本文主要介绍 **无源蜂鸣器** 的驱动，实现 PWM 控制 **无缘蜂鸣器** 。
+
+![media_buzzer_1](media/media_buzzer_1.jpg)
+
+淘宝搜索购买无源蜂鸣器
+
+![media_buzzer_2](media/media_buzzer_2.jpg)
+
+无源蜂鸣器通过PWM开关三极管驱动。 我们只需要电源，以及2KHz~5KHz 的pwm方波即可。
+
+![media_buzzer_3](media/media_buzzer_3.jpg)
+
+
+
+## 软件设计
+
+#### 查询开发板对应的IO口
+
+首先确定要控制硬件的哪个引脚，然后通过官网的 API 类库找到对应的 PWM 编号 。详解请参考 [QuecPython-misc - PWM](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pwm) 例: 
+
+| 模块型号                               | **对应引脚号** |
+| -------------------------------------- | -------------- |
+| EC600S/N ==> PWM2<br />EC600U ==> PWM0 | 引脚号70       |
+
+
+### **实验代码**
+
+```python
+
+from misc import PWM
+import utime as time
+import urandom as random
+import log
+
+# API https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pwm
+# 蜂鸣器模块 https://detail.tmall.com/item.htm?id=41251333522
+# 无源蜂鸣器-频率可控版
+
+"""
+
+pwm0 = PWM(PWM.PWMn,PWM.ABOVE_xx,highTime,cycleTime)
+
+注：EC600SCN平台，支持PWM0-PWM3，对应引脚如下：
+
+PWM0 – 引脚号52
+
+PWM1 – 引脚号53
+
+PWM2 – 引脚号70
+
+PWM3 – 引脚号69
+
+"""
+
+# 获取logger对象
+
+buzzer_log = log.getLogger("buzzer_test")
+
+# Duration 为 ms
+
+def outputpwm(HZ, duty_cycle, Duration):
+
+    # 将HZ 转化为 10us 级别
+
+    cycleTime = int((10000000/HZ)/10)
+    highTime = int(cycleTime * duty_cycle)
+
+    # 输出debug级别的日志
+        
+    buzzer_log.debug(
+	    """out put pin70 cycleTime {0} * 10us,
+	    highTime {1} * 10us, Duration of {2}"""
+	    .format(cycleTime, highTime, Duration))
+    pwm1 = PWM(PWM.PWM2, PWM.ABOVE_10US, highTime, cycleTime)       
+    pwm1.open()
+
+    # 休眠给定毫秒数的时间
+        
+    time.sleep_ms(Duration)
+    pwm1.close()
+    pass
+
+
+def test_Buzzer():
+
+	#设置日志输出级别
+
+	log.basicConfig(level=log.DEBUG)
+
+	# 循环遍历10次
+
+	for i in range(10):
+
+		# 随机生成 start 到 end 范围内的浮点数，范围可以自己选择， 0~1
+
+		duty_cycle = random.uniform(0.1, 0.8)
+
+		# 建议输出2000~5000HZ 的PWM波形
+		# 随机生成一个 start 到 end 之间的整数
+
+		HZ = random.randint(2000, 5000)
+		outputpwm(HZ, duty_cycle, 500)
+		time.sleep_ms(1500)
+        
+	pass
+
+
+if __name__ == "__main__":
+
+	# creat a thread Check key status
+
+	test_Buzzer()
+
+# 将代码下载运行，可以听到蜂鸣器产生随机的声音
+```
+
+## 配套代码
+
+* [下载代码](code/code_buzzer.py)
+ <!-- <a href="code\code_buzzer.py" target="_blank">下载代码</ -->
\ No newline at end of file
diff --git a/docs/Advanced_development/zh/QuecPythonBus/code/code_ExtInt.py b/docs/Advanced_development/zh/QuecPythonBus/code/code_ExtInt.py
new file mode 100644
index 0000000000000000000000000000000000000000..241ccd79ca3130dce058c71b9577fac8dc4b6da7
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/code/code_ExtInt.py
@@ -0,0 +1,29 @@
+from machine import ExtInt
+import utime as time
+# PIN脚及API介绍请参考 https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=extint
+state = 10  # 测试次数
+
+
+def callback(args):
+    print('interrupt: {}'.format(args))
+
+
+def main():
+    extint13 = ExtInt(ExtInt.GPIO13, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, callback)  # 创建对象
+	extint12 = ExtInt(ExtInt.GPIO12, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, callback)  # 创建对象
+	extint13.enable()  # 使能中断
+	extint12.enable()  # 使能中断
+	print('开启GPIO: {}中断. \r\n'.format(extint13.line()))
+	print('开启GPIO: {}中断. \r\n'.format(extint12.line()))
+    # 等待按键按下，触发
+    while state:
+        time.sleep_ms(1)
+        pass
+    # 停止映射外部中断
+    extint13.disable()  # 关闭中断
+	extint12.disable()  # 关闭中断
+    print("The main function has exited")
+
+
+if __name__ == "__main__":
+    main()
diff --git a/docs/Advanced_development/zh/QuecPythonBus/code/code_UART_CDC.py b/docs/Advanced_development/zh/QuecPythonBus/code/code_UART_CDC.py
new file mode 100644
index 0000000000000000000000000000000000000000..a8d288d5ef5c2687598f5a9bd78c390b6eb664ab
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/code/code_UART_CDC.py
@@ -0,0 +1,70 @@
+# import log
+import utime
+import _thread
+import ubinascii
+from machine import UART
+
+state = 1
+uart_x = None
+usbcdc = None
+
+# # | 参数      | 参数类型 | 说明                |
+# # | -------- | ------- | ------------------ |
+# # | CRITICAL | 常量     | 日志记录级别的数值 50 |
+# # | ERROR    | 常量     | 日志记录级别的数值 40 |
+# # | WARNING  | 常量     | 日志记录级别的数值 30 |
+# # | INFO     | 常量     | 日志记录级别的数值 20 |
+# # | DEBUG    | 常量     | 日志记录级别的数值 10 |
+# # | NOTSET   | 常量     | 日志记录级别的数值 0  |
+# log.basicConfig(level=log.CRITICAL)  # 设置日志输出级别
+# log = log.getLogger("Grey")  # 获取logger对象，如果不指定name则返回root对象，多次使用相同的name调用getLogger方法返回同一个logger对象
+
+
+def uart_x_read():
+    global state
+    global uart_x
+    global usbcdc
+
+    while state:
+        msglen = uart_x.any()  # 返回是否有可读取的数据长度
+        if msglen:  # 当有数据时进行读取
+            msg = uart_x.read(msglen)  # 读取数据
+            utf8_msg = msg.decode()  # 初始数据是字节类型（bytes）,将字节类型数据进行编码
+            if "Grey" in utf8_msg:
+                break
+            else:
+                usbcdc.write("{}".format(utf8_msg))  # 发送数据
+        utime.sleep_ms(1)
+    state = 0
+
+
+def usbcdc_read():
+    global state
+    global uart_x
+    global usbcdc
+
+    while state:
+        msglen = usbcdc.any()  # 返回是否有可读取的数据长度
+        if msglen:  # 当有数据时进行读取
+            msg = usbcdc.read(msglen)  # 读取数据
+            utf8_msg = msg.decode()  # 初始数据是字节类型（bytes）,将字节类型数据进行编码
+            if "Grey" in utf8_msg:
+                break
+            else:
+                uart_x.write("{}".format(utf8_msg))  # 发送数据
+        utime.sleep_ms(1)
+    state = 0
+
+
+if __name__ == "__main__":
+    uart_x = UART(UART.UART2, 115200, 8, 0, 1, 0)
+    usbcdc = UART(UART.UART3, 115200, 8, 0, 1, 0)
+
+    uart_x.write("Grey_测试")
+    usbcdc.write("Grey_测试") 
+
+    _thread.start_new_thread(uart_x_read, ())  # 创建一个线程来监听接收uart消息
+    _thread.start_new_thread(usbcdc_read, ())  # 创建一个线程来监听接收CDC消息
+
+    while state:
+        utime.sleep_ms(1)
diff --git a/docs/Advanced_development/zh/QuecPythonBus/code/code_button.py b/docs/Advanced_development/zh/QuecPythonBus/code/code_button.py
new file mode 100644
index 0000000000000000000000000000000000000000..097c0992ad2c319c7eabecbc90f4caa34713697c
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/code/code_button.py
@@ -0,0 +1,15 @@
+import utime
+from machine import Pin
+
+
+if __name__ == '__main__':
+    gpio13 = Pin(Pin.GPIO13, Pin.IN, Pin.PULL_PU, 1)  # EC600S/N开发板使用
+    # gpio13 = Pin(Pin.GPIO4, Pin.IN, Pin.PULL_PU, 1)  # EC600U开发板使用
+    while True:
+        if gpio13.read() == 0:
+            utime.sleep_ms(10)
+            if gpio13.read() == 0:
+                while gpio13.read() == 0:
+                    pass
+                print("GPIO13按下")
+        pass
diff --git a/docs/Advanced_development/zh/QuecPythonBus/code/code_buzzer.py b/docs/Advanced_development/zh/QuecPythonBus/code/code_buzzer.py
new file mode 100644
index 0000000000000000000000000000000000000000..5225c7bbaed9b85736d1dad9b7cd261fc11b6215
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/code/code_buzzer.py
@@ -0,0 +1,83 @@
+from misc import PWM
+import utime as time
+import urandom as random
+import log
+
+# API https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=pwm
+# 蜂鸣器模块 https://detail.tmall.com/item.htm?id=41251333522
+# 无源蜂鸣器-频率可控版
+
+"""
+
+pwm0 = PWM(PWM.PWMn,PWM.ABOVE_xx,highTime,cycleTime)
+
+注：EC600SCN平台，支持PWM0-PWM3，对应引脚如下：
+
+PWM0 – 引脚号52
+
+PWM1 – 引脚号53
+
+PWM2 – 引脚号70
+
+PWM3 – 引脚号69
+
+"""
+
+# 获取logger对象
+
+buzzer_log = log.getLogger("buzzer_test")
+
+# Duration 为 ms
+
+def outputpwm(HZ, duty_cycle, Duration):
+
+    # 将HZ 转化为 10us 级别
+
+    cycleTime = int((10000000/HZ)/10)
+    highTime = int(cycleTime * duty_cycle)
+
+    # 输出debug级别的日志
+        
+    buzzer_log.debug(
+	    """out put pin70 cycleTime {0} * 10us,
+	    highTime {1} * 10us, Duration of {2}"""
+	    .format(cycleTime, highTime, Duration))
+    pwm1 = PWM(PWM.PWM2, PWM.ABOVE_10US, highTime, cycleTime)       
+    pwm1.open()
+
+    # 休眠给定毫秒数的时间
+        
+    time.sleep_ms(Duration)
+    pwm1.close()
+    pass
+
+
+def test_Buzzer():
+
+	#设置日志输出级别
+
+	log.basicConfig(level=log.DEBUG)
+
+	# 循环遍历10次
+
+	for i in range(10):
+
+		# 随机生成 start 到 end 范围内的浮点数，范围可以自己选择， 0~1
+
+		duty_cycle = random.uniform(0.1, 0.8)
+
+		# 建议输出2000~5000HZ 的PWM波形
+		# 随机生成一个 start 到 end 之间的整数
+
+		HZ = random.randint(2000, 5000)
+		outputpwm(HZ, duty_cycle, 500)
+		time.sleep_ms(1500)
+        
+	pass
+
+
+if __name__ == "__main__":
+
+	# creat a thread Check key status
+
+	test_Buzzer()
\ No newline at end of file
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_1.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_1.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..41421feb83f7955a3de178e949d94ed47a6287ea
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_1.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_2.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_2.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..5355ab9897d86fdc57c91e1bd269567dba99043b
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_2.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_3.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..5f7d9a8fdcc6186a90a06efeaced6fcf0e872fe4
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_ExtInt_3.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_1.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_1.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..0dd3d266fee8f2b92601ded72dbc03f677130a5b
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_1.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_2.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_2.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..1337a536d4331ae03a0f3bc74ff52fe0abef3bc5
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_2.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_3.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..042fc4cfc8b4c1ccdc900ca31be90588cfcace38
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_UART_3.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_button_1.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_1.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..99ad61a5655bdc24f0b63c0480548be6014594d0
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_1.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_button_2.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_2.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..5f7d9a8fdcc6186a90a06efeaced6fcf0e872fe4
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_2.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_button_3.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..1b8ca2f4595ea54bb892cfbf6c6854e1b9b195e0
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_3.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_button_4.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_4.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..80bd9f7dd8497851cab1c8ea92455a595be6a9a7
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_button_4.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_1.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_1.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..08655fb0aca59b86c0c8c0c856522fe0f440cd1a
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_1.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_2.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_2.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..04f1abf9f20c5d03199c9f018b7fb957cc5db9b4
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_2.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_3.jpg b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..e46d0e65656a8f8d992dd1a51dc20e7c6157d2a0
Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonBus/media/media_buzzer_3.jpg differ
diff --git a/docs/Advanced_development/zh/QuecPythonBus/uart.md b/docs/Advanced_development/zh/QuecPythonBus/uart.md
new file mode 100644
index 0000000000000000000000000000000000000000..0fb8e8c9997c5fe1ce66e26d9710dbb0e3566668
--- /dev/null
+++ b/docs/Advanced_development/zh/QuecPythonBus/uart.md
@@ -0,0 +1,78 @@
+# UART实验
+
+## 修订历史
+
+| 版本 | 日期       | 作者    | 变更表述 |
+| ---- | ---------- | ------- | -------- |
+| 1.0  | 2021-09-22 | Grey.tu | 初版     |
+
+文档主要介绍QuecPython_UART，UART作为一种常用的通用方式，主要用数据交互，可实现全双工传输。通过本文你将了解到EC600x（包括EC600S、EC600N、EC600U）UART的设置参数及使用方法。
+
+有关API详解请参考 [QuecPython-machine-UART](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=uart)
+
+
+
+## 硬件设计
+
+针对不同的模组，开放的UART列表如下：
+
+| 模块型号 | UART编号                                                     | UART_PIN                                                     |
+| -------- | ------------------------------------------------------------ | ------------------------------------------------------------ |
+| EC600S/N | UART0_DEBUG PORT<br>UART1_BT PORT<br/>UART2_MAIN PORT<br />UART3_USB CDC PORT | UART0_DEBUG_PORT(TX => PIN71 & RX => PIN72)<br />UART1_BT_PORT(TX => PIN3 & RX => PIN2)<br />UART2_MAIN_PORT(TX => PIN32 & RX => PIN31)<br />USB_CDC_PORT ==> USB虚拟口，波特率不受限 |
+| EC600U   | UART0_DEBUG PORT<br />UART1_BT PORT<br/>UART2_MAIN PORT<br />UART3_USB CDC PORT | UART0_DEBUG_PORT(TX => PIN71 & RX => PIN72)<br />UART1_BT_PORT(TX => PIN124 & RX => PIN123) <br />UART2_MAIN_PORT(TX => PIN32 & RX => PIN31)<br />USB_CDC_PORT ==> USB虚拟口，波特率不受限<br />注: EC600U_DEBUG PORT只能作为DEBUG_LOG输出使用, <br />不能作为UART通信使用. |
+
+官方QuecPython开发板V1.2/V1.3的UART位置标记如下图：
+
+![media_UART_1](media/media_UART_1.jpg)
+
+注：次图仅适用于官方QuecPython开发板V1.2/V1.3。后续开发板视情况而定。
+
+
+
+## 软件设计
+
+物理 UART 基本连接使用我们在 UART 功能章节已经介绍，我们本章过多介绍，本章我们主要介绍下 USB CDC PORT。
+
+USB CDC PORT 为USB虚拟的串行通信口，此通信口采用 UART 一样的通信协议，但并未真正意义的 UART。它的通信速率不受 UART 波特率的限制，可根据USB协议自动设别。可以更快速率的传输数据，也无需固定波特率的繁琐。
+
+```python
+from machine import UART
+
+uart_x = UART(UART.UART2, 115200, 8, 0, 1, 0)
+usbcdc = UART(UART.UART3, 115200, 8, 0, 1, 0)  # 此波特率设置无效, 通信时可以任意波特率
+
+while True:
+    uart_x_msglen = uart_x.any()
+    if uart_x_msglen:
+        uart_x_msg = uart_x.read(uart_x_msglen)
+        uart_x_utf8_msg = uart_x_msg.decode()
+        usbcdc.write("{}".format(uart_x_utf8_msg))
+
+    usbcdc_msglen = usbcdc.any()
+    if usbcdc_msglen:
+        usbcdc_msg = usbcdc.read(usbcdc_msglen)
+        usbcdc_utf8_msg = usbcdc_msg.decode()
+        uart_x.write("{}".format(usbcdc_utf8_msg))
+```
+
+运行上面的脚本代码，便可实现物理 UART2 与 USB CDC PORT 的数据透传。
+
+
+
+## 下载验证
+
+下载.py 文件到模组运行：
+
+![media_UART_2](media/media_UART_2.jpg)
+
+下载之后，便可实现物理 UARTx 与 USB CDC PORT 的数据透传功能。
+
+![media_UART_3](media/media_UART_3.jpg)
+
+
+
+## 配套代码
+
+<!-- * [下载代码](code/code_UART_CDC.py) -->
+ <a href="code/code_UART_CDC.py" target="_blank">下载代码</a>
+