diff --git a/docs/Advanced_development/zh/QuecPythonSub/Photoresistor.md b/docs/Advanced_development/zh/QuecPythonSub/Photoresistor.md new file mode 100644 index 0000000000000000000000000000000000000000..628716bb989ff7a90c8d7b1a28721f45788788bc --- /dev/null +++ b/docs/Advanced_development/zh/QuecPythonSub/Photoresistor.md @@ -0,0 +1,213 @@ +## 修订历史 + +| 版本 | 日期 | 作者 | 变更表述 | +| ---- | ---------- | ------ | ------------ | +| 1.0 | 2021-09-15 | Kayden | 初始版本修订 | + + + +## 光敏传感器实验 + +本片文章主要简介EC600S ADC 硬件资源(其他模组类同)， 介绍[QuecPython ADC API](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=adc)，以及使用ADC来检测当前光敏电阻的阻值。 + +### 硬件资源 + +EC600S 引出了两个ADC接口。参考 EC600S_QuecPython_EVB_V1.0_SCH.pdf 文档。 + +其他开发板参考对应原理图文档，可从下载中心或者QQ群下载：[下载中心](https://python.quectel.com/download) + +QQ群：445121768 + +![](media/photoresistor_1.png) + +| 外设 | 引脚 | +| ---- | ---- | +| ADC0 | 19 | +| ADC1 | 20 | + +**注：每个模组具体对应关系API介绍有详细介绍。** + +并且提供了一个光敏电阻。 + +![](media/photoresistor_2.png) + +### 软件资源 + +#### 创建ADC对象 + +**ADC()** + +返回一个adc对象。 + +#### 打开设备 – open + +ADC功能初始化。 + +参数 + +无 + +返回值 + +成功返回整型0，失败返回整型-1。 + +#### 读取电压值 – read + +读取指定通道的电压值，单位mV。 + +参数 + +| 参数 | 参数类型 | 参数说明 | +| ---- | -------- | ------------------------------------------- | +| ADCn | int | EC600平台： ADC0 – 引脚号19 ADC1 – 引脚号20 | + +#### 关闭设备 – close + +关闭ADC。 + +参数:无 + +返回值: + +0关闭成功，-1关闭失败。 + +### 光敏电阻实验 + +#### 光敏电阻原理简介 + +定义： + +光敏电阻是用硫化隔或硒化隔等半导体材料制成的特殊电阻器，表面还涂有防潮树脂，具有光电导效应。 + +特性： + +光敏电阻对光线十分敏感。光照愈强，阻值就愈低。随着光照强度的升高，电阻值迅速降低，可降低至1KΩ以下。包含了以下几个特性。 + +- 伏安特性： + + 光敏传感器在一定的入射照度下，光敏元件的电流 *I* 与所加电压 *U*之间的关系称为光敏器件的伏安特性。 + +- 光照特性 + + 光敏传感器的光谱灵敏度与入射光强之间的关系称为光照特性，有时光敏传感器的输出电压或电流与入射光强之间的关系也称为光照特性。 + +#### 实验设计 + +设计一个实验，根据当前光照强度，实时打印当前的光敏电阻的阻值。下图是光敏电阻的原理图。 + +![](media/photoresistor_3.png) + +ADC0 是我们可以使用ADC外设测试的电压点。 + +![](media/photoresistor_4.png) + +最终可以计算出，按照如下算式计算R22阻值。 + +![](media/photoresistor_5.png) + +#### 实验代码 + + 下载代码 + +```python +''' + +File: Photoresistor.py + +Project: adc + +File Created: Thursday, 24th December 2020 5:44:08 pm + +Author: chengzhu.zhou + +----- + +Last Modified: Wednesday, 30th December 2020 10:10:33 am + +Modified By: chengzhu.zhou + +----- + +Copyright 2020 - 2020 quectel + +''' + +from misc import ADC + +import utime as time + +import _thread + + + +# unit as Ω + +def Voltage_to_Resistance(Volt): + + # + + Va = 2 * Volt + + resistance = (2 * 4700 * 40200 * Va)/(2 * 4700 * (3300 - Va) - (40200 *Va)) + + return resistance + + + +def Photoresistor_thread(delay, retryCount): + + # creat a adc device + + AdcDevice = ADC() + + while retryCount: + + retryCount = retryCount - 1 + + # get ADC.ADC0 value + + adcvalue = AdcDevice.read(ADC.ADC0) + + print("get ADC.ADC0 Voltage value as {0}mv".format(adcvalue)) + + # Converted to resistance + + resistance = Voltage_to_Resistance(adcvalue) + + print("Photoresistor resistance as {0}Ω".format(resistance)) + + time.sleep(delay) + + pass + + + +if __name__ == "__main__": + + # creat a thread Convert ADC to Voltage + + _thread.start_new_thread(Photoresistor_thread, (1, 10)) + + print("creent main thread has exit") +``` + + + +#### 实验操作 + +1.将代码烧录进开发板运行。 + +2.用物品挡住光敏电阻，改变照射到光敏电阻的光强， + +3.查看串口输出的阻值的变化。 + +最终我们可以在串口看到，阻值输出的变化如下。 + +![](media/photoresistor_6.png) + + + +### 专业名词 + +> ***ADC：模数转换*** + diff --git a/docs/Advanced_development/zh/QuecPythonSub/code/Photoresistor.py b/docs/Advanced_development/zh/QuecPythonSub/code/Photoresistor.py new file mode 100644 index 0000000000000000000000000000000000000000..171b64f561878b3bec1e24cd05783b12fadbbcfc --- /dev/null +++ b/docs/Advanced_development/zh/QuecPythonSub/code/Photoresistor.py @@ -0,0 +1,46 @@ +''' +File: Photoresistor.py +Project: adc +File Created: Thursday, 24th December 2020 5:44:08 pm +Author: chengzhu.zhou +----- +Last Modified: Wednesday, 30th December 2020 10:10:33 am +Modified By: chengzhu.zhou +----- +Copyright 2020 - 2020 quectel +''' + + +from misc import ADC +import utime as time +import _thread + +# unit as Ω +def Voltage_to_Resistance(Volt): + # + Va = 2 * Volt + resistance = (2 * 4700 * 40200 * Va)/(2 * 4700 * (3300 - Va) - (40200 * Va)) + return resistance + + +def Photoresistor_thread(delay, retryCount): + # creat a adc device + AdcDevice = ADC() + while retryCount: + retryCount = retryCount - 1 + # get ADC.ADC0 value + adcvalue = AdcDevice.read(ADC.ADC0) + print("get ADC.ADC0 Voltage value as {0}mv".format(adcvalue)) + # Converted to resistance + resistance = Voltage_to_Resistance(adcvalue) + print("Photoresistor resistance as {0}Ω".format(resistance)) + time.sleep(delay) + pass + + +if __name__ == "__main__": + # creat a thread Convert ADC to Voltage + _thread.start_new_thread(Photoresistor_thread, (1, 10)) + print("creent main thread has exit") + + diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_1.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_1.png new file mode 100644 index 0000000000000000000000000000000000000000..65636edf0a30432d20f7c0490115dc72a0bfc756 Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_1.png differ diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_2.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_2.png new file mode 100644 index 0000000000000000000000000000000000000000..a3d91411af15c2b32ceaff4136c285a035109065 Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_2.png differ diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_3.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_3.png new file mode 100644 index 0000000000000000000000000000000000000000..cb47d1bb9d5cb19935e88f503ad0a039d6467022 Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_3.png differ diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_4.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_4.png new file mode 100644 index 0000000000000000000000000000000000000000..0e51011501fa429bcde5ed12c8c328849a3c92b1 Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_4.png differ diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_5.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_5.png new file mode 100644 index 0000000000000000000000000000000000000000..e5c449641fefac9b1bbbae0e7de00ea67dfeba25 Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_5.png differ diff --git a/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_6.png b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_6.png new file mode 100644 index 0000000000000000000000000000000000000000..e1dba48bf52138d10014cf41be378f24fb5339cd Binary files /dev/null and b/docs/Advanced_development/zh/QuecPythonSub/media/photoresistor_6.png differ diff --git a/docs/Quick_start/zh/code/test_a.py b/docs/Quick_start/zh/code/test_a.py new file mode 100644 index 0000000000000000000000000000000000000000..6ea4cdf191d05180a6c510da1d8d6cd881e32dcc --- /dev/null +++ b/docs/Quick_start/zh/code/test_a.py @@ -0,0 +1,16 @@ +import uio + +# 以追加方式打开 test_a.txt 文件 +fd = uio.open("usr/test_a.txt", mode='a') +# 向文件追加写内容 +fd.write("Hello Quectel") +# 关闭文件 +fd.close() + +# 以只读方式打开看追加的结果 +fd = uio.open("usr/test_a.txt", mode='r') +# 读取文件内容 +text = fd.read() +print(text) +# 关闭文件 +fd.close() diff --git a/docs/Quick_start/zh/code/test_a.txt b/docs/Quick_start/zh/code/test_a.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a3cfff13f034a58c591a7638bd587f5234c8aa1 --- /dev/null +++ b/docs/Quick_start/zh/code/test_a.txt @@ -0,0 +1 @@ +hello python \ No newline at end of file diff --git a/docs/Quick_start/zh/code/test_r.py b/docs/Quick_start/zh/code/test_r.py new file mode 100644 index 0000000000000000000000000000000000000000..9cfb58e911c53587c208992917cf099d2c958cdd --- /dev/null +++ b/docs/Quick_start/zh/code/test_r.py @@ -0,0 +1,9 @@ +import uio + +# 以只读方式打开 test_r.txt 文件 +fd = uio.open("usr/test_r.txt", mode='r') +# 读取文件内容 +text = fd.read() +print(text) +# 关闭文件 +fd.close() diff --git a/docs/Quick_start/zh/code/test_r.txt b/docs/Quick_start/zh/code/test_r.txt new file mode 100644 index 0000000000000000000000000000000000000000..7d266c2323b952a0dd484e8cad9d773eb1e635a1 --- /dev/null +++ b/docs/Quick_start/zh/code/test_r.txt @@ -0,0 +1 @@ +Hello Python \ No newline at end of file diff --git a/docs/Quick_start/zh/code/test_w.py b/docs/Quick_start/zh/code/test_w.py new file mode 100644 index 0000000000000000000000000000000000000000..78177b27024892152fc918e4190bdce095496a0a --- /dev/null +++ b/docs/Quick_start/zh/code/test_w.py @@ -0,0 +1,8 @@ +import uio + +# 以只写方式打开 test_w.txt 文件 +fd = uio.open("usr/test_w.txt", mode='w') +# 向文件写内容 +fd.write("HELLO PYTHON") +# 关闭文件 +fd.close() diff --git a/docs/Quick_start/zh/code/test_w.txt b/docs/Quick_start/zh/code/test_w.txt new file mode 100644 index 0000000000000000000000000000000000000000..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 diff --git a/docs/Quick_start/zh/code/test_w_r.py b/docs/Quick_start/zh/code/test_w_r.py new file mode 100644 index 0000000000000000000000000000000000000000..82e8ba7cef0ed9ddd720a26e80972b1a4404c7ff --- /dev/null +++ b/docs/Quick_start/zh/code/test_w_r.py @@ -0,0 +1,9 @@ +import uio + +# 以只读方式打开 test_w.txt 文件 +fd = uio.open("usr/test_w.txt", mode='r') +# 读取文件内容 +text = fd.read() +print(text) +# 关闭文件 +fd.close() diff --git a/docs/sbs/zh/QuecPythonWirelessNetwork/DataCall.md b/docs/sbs/zh/QuecPythonWirelessNetwork/DataCall.md index 297b4ef9a9c692157377644c46903009e3008e80..6e90f21ce335e5f08ec262e947396659f97531ea 100644 --- a/docs/sbs/zh/QuecPythonWirelessNetwork/DataCall.md +++ b/docs/sbs/zh/QuecPythonWirelessNetwork/DataCall.md @@ -8,23 +8,12 @@ # QuecPython_dataCall数据拨号 -本片文章主要简介QuecPython_datacall 模块的使用，模块默认开机自动拨号上网。 - **模块功能：** 提供数据拨号相关接口。启动；配置；查询终端通过何种接入方式来访问何种网络。 -**对应API:** - -- dataCall.start(profileIdx, ipType, apn, username, password, authType) -- dataCall.setApn(profileIdx, ipType, apn, username, password, authType) -- dataCall.setCallback(usrFun) -- dataCall.getInfo(profileIdx, ipType) - 具体的API 详解请参考[Quecpython - dataCall - 数据拨号](https://python.quectel.com/wiki/#/zh-cn/api/QuecPythonClasslib?id=datacall-数据拨号) - - ## 数据拨号简介 简单理解， 数据拨号即为通过拨号的方式和服务器建立连接，获取网络访问许可过程。 对于终端设备来说就是配置APN。