diff --git a/bsp/Vango/v85xx/Libraries/CMSIS/Vango/V85xx/Include/target.h b/bsp/Vango/v85xx/Libraries/CMSIS/Vango/V85xx/Include/target.h index 7199c552fbdd3aaf2cffbd4a4134db914887f6ed..aa2ef732f4c60be68437d1fa377c7be19aa14379 100644 --- a/bsp/Vango/v85xx/Libraries/CMSIS/Vango/V85xx/Include/target.h +++ b/bsp/Vango/v85xx/Libraries/CMSIS/Vango/V85xx/Include/target.h @@ -390,10 +390,10 @@ typedef struct */ typedef struct { - __IO uint32_t CTRL; /*!< Timer x��s control register, Address offset: 0x00 */ - __IO uint32_t VALUE; /*!< Timer x��s current count register, Address offset: 0x04 */ - __IO uint32_t RELOAD; /*!< Timer x��s reload register, Address offset: 0x08 */ - __IO uint32_t INT; /*!< Timer x��s interrupt status register, Address offset: 0x0C */ + __IO uint32_t CTRL; /*!< Timer x's control register, Address offset: 0x00 */ + __IO uint32_t VALUE; /*!< Timer x's current count register, Address offset: 0x04 */ + __IO uint32_t RELOAD; /*!< Timer x's reload register, Address offset: 0x08 */ + __IO uint32_t INT; /*!< Timer x's interrupt status register, Address offset: 0x0C */ } TMR_TypeDef; /** @@ -401,14 +401,14 @@ typedef struct */ typedef struct { - __IO uint32_t CTL; /*!< PWM Timer x��s control register, Address offset: 0x00 */ - __IO uint32_t TAR; /*!< PWM Timer x��s current count register, Address offset: 0x04 */ - __IO uint32_t CCTL0; /*!< PWM Timer x��s compare/capture control register 0, Address offset: 0x08 */ - __IO uint32_t CCTL1; /*!< PWM Timer x��s compare/capture control register 1, Address offset: 0x0C */ - __IO uint32_t CCTL2; /*!< PWM Timer x��s compare/capture control register 2, Address offset: 0x10 */ - __IO uint32_t CCR0; /*!< PWM Timer x��s compare/capture data register 0, Address offset: 0x14 */ - __IO uint32_t CCR1; /*!< PWM Timer x��s compare/capture data register 1, Address offset: 0x18 */ - __IO uint32_t CCR2; /*!< PWM Timer x��s compare/capture data register 2, Address offset: 0x1C */ + __IO uint32_t CTL; /*!< PWM Timer x's control register, Address offset: 0x00 */ + __IO uint32_t TAR; /*!< PWM Timer x's current count register, Address offset: 0x04 */ + __IO uint32_t CCTL0; /*!< PWM Timer x's compare/capture control register 0, Address offset: 0x08 */ + __IO uint32_t CCTL1; /*!< PWM Timer x's compare/capture control register 1, Address offset: 0x0C */ + __IO uint32_t CCTL2; /*!< PWM Timer x's compare/capture control register 2, Address offset: 0x10 */ + __IO uint32_t CCR0; /*!< PWM Timer x's compare/capture data register 0, Address offset: 0x14 */ + __IO uint32_t CCR1; /*!< PWM Timer x's compare/capture data register 1, Address offset: 0x18 */ + __IO uint32_t CCR2; /*!< PWM Timer x's compare/capture data register 2, Address offset: 0x1C */ } PWM_TypeDef; /** @@ -417,8 +417,8 @@ typedef struct typedef struct { __IO uint32_t OSEL; /*!< PWM output selection register, Address offset: 0x00 */ -// __IO uint32_t ISEL01; /*!< PWM0 and PWM1��s input selection register, Address offset: 0x04 */ -// __IO uint32_t ISEL23; /*!< PWM2 and PWM3��s input selection register, Address offset: 0x08 */ +// __IO uint32_t ISEL01; /*!< PWM0 and PWM1's input selection register, Address offset: 0x04 */ +// __IO uint32_t ISEL23; /*!< PWM2 and PWM3's input selection register, Address offset: 0x08 */ uint32_t RESERVED0; /*!< RESERVED0, Address offset: 0x04 */ uint32_t RESERVED1; /*!< RESERVED1, Address offset: 0x08 */ } PWM_MUX_TypeDef; @@ -655,7 +655,7 @@ typedef struct /************** Bits definition for PMU_CONTROL register ******************/ #define PMU_CONTROL_INT_IOA_EN_Pos (0U) #define PMU_CONTROL_INT_IOA_EN_Msk (0x1U << PMU_CONTROL_INT_IOA_EN_Pos) /*!< 0x00000001 */ -#define PMU_CONTROL_INT_IOA_EN PMU_CONTROL_INT_IOA_EN_Msk /*!< PMU��s interrupt enable register. This bit is used to control the interrupt signal output to CPU */ +#define PMU_CONTROL_INT_IOA_EN PMU_CONTROL_INT_IOA_EN_Msk /*!< PMU's interrupt enable register. This bit is used to control the interrupt signal output to CPU */ #define PMU_CONTROL_RTCLK_SEL_Pos (1U) #define PMU_CONTROL_RTCLK_SEL_Msk (0x1U << PMU_CONTROL_RTCLK_SEL_Pos) /*!< 0x00000002 */ #define PMU_CONTROL_RTCLK_SEL PMU_CONTROL_RTCLK_SEL_Msk /*!< RTC Clock selection */ @@ -679,7 +679,7 @@ typedef struct //#define PMU_CONTROL_PWUPCYC PMU_CONTROL_PWUPCYC_Msk /*!< Power-up cycle count, this register control the power-up wait time when a wake-up even is received. The unit is 32K clock period */ //#define PMU_CONTROL_NOWAITLOCK_Pos (17U) //#define PMU_CONTROL_NOWAITLOCK_Msk (0x1U << PMU_CONTROL_NOWAITLOCK_Pos) /*!< 0x00020000 */ -//#define PMU_CONTROL_NOWAITLOCK PMU_CONTROL_NOWAITLOCK_Msk /*!< if the hardware will wait for PLLL��s lock signal when switch clock source to PLLL/PLLH */ +//#define PMU_CONTROL_NOWAITLOCK PMU_CONTROL_NOWAITLOCK_Msk /*!< if the hardware will wait for PLLL's lock signal when switch clock source to PLLL/PLLH */ /************** Bits definition for PMU_STS register ******************/ #define PMU_STS_INT_32K_Pos (0U) @@ -710,42 +710,42 @@ typedef struct /************** Bits definition for PMU_IOAOEN register ******************/ #define PMU_IOAOEN_Pos (0U) #define PMU_IOAOEN_Msk (0xFFFFU << PMU_IOAOEN_Pos) /*!< 0x0000FFFF */ -#define PMU_IOAOEN_IOAOEN PMU_IOAOEN_Msk /*!< Each bit control the IOA��s output enable signal */ +#define PMU_IOAOEN_IOAOEN PMU_IOAOEN_Msk /*!< Each bit control the IOA's output enable signal */ /************** Bits definition for PMU_IOAIE register ******************/ #define PMU_IOAIE_Pos (0U) #define PMU_IOAIE_Msk (0xFFFFU << PMU_IOAIE_Pos) /*!< 0x0000FFFF */ -#define PMU_IOAIE_IOAIE PMU_IOAIE_Msk /*!< Each bit control the IOA��s input enable signal */ +#define PMU_IOAIE_IOAIE PMU_IOAIE_Msk /*!< Each bit control the IOA's input enable signal */ /************** Bits definition for PMU_IOADAT register ******************/ #define PMU_IOADAT_Pos (0U) #define PMU_IOADAT_Msk (0xFFFFU << PMU_IOADAT_Pos) /*!< 0x0000FFFF */ -#define PMU_IOADAT_IOADAT PMU_IOADAT_Msk /*!< Each bit control the IOA��s output data and pull low/high function */ +#define PMU_IOADAT_IOADAT PMU_IOADAT_Msk /*!< Each bit control the IOA's output data and pull low/high function */ /************** Bits definition for PMU_IOAATT register ******************/ #define PMU_IOAATT_Pos (0U) #define PMU_IOAATT_Msk (0xFFFFU << PMU_IOAATT_Pos) /*!< 0x0000FFFF */ -#define PMU_IOAATT_IOAATT PMU_IOAATT_Msk /*!< Each bit control the IOA��s attribute and pull low/high function */ +#define PMU_IOAATT_IOAATT PMU_IOAATT_Msk /*!< Each bit control the IOA's attribute and pull low/high function */ /************** Bits definition for PMU_IOAWKUEN register ******************/ #define PMU_IOAWKUEN_Pos (0U) #define PMU_IOAWKUEN_Msk (0xFFFFFFFFU << PMU_IOAWKUEN_Pos) /*!< 0xFFFFFFFF */ -#define PMU_IOAWKUEN_IOAWKUEN PMU_IOAWKUEN_Msk /*!< Every 2 bits control the IOA��s wake up function */ +#define PMU_IOAWKUEN_IOAWKUEN PMU_IOAWKUEN_Msk /*!< Every 2 bits control the IOA's wake up function */ /************** Bits definition for PMU_IOASTS register ******************/ #define PMU_IOASTS_Pos (0U) #define PMU_IOASTS_Msk (0xFFFFU << PMU_IOASTS_Pos) /*!< 0x0000FFFF */ -#define PMU_IOASTS_IOASTS PMU_IOASTS_Msk /*!< Each bit represents the current IOA��s input data value */ +#define PMU_IOASTS_IOASTS PMU_IOASTS_Msk /*!< Each bit represents the current IOA's input data value */ /************** Bits definition for PMU_IOAINT register ******************/ #define PMU_IOAINT_Pos (0U) #define PMU_IOAINT_Msk (0xFFFFU << PMU_IOAINT_Pos) /*!< 0x0000FFFF */ -#define PMU_IOAINT_IOAINT PMU_IOAINT_Msk /*!< Each bit represents the IOA��s interrupt status. The corresponded bit will be set to 1 when corresponded wake-up event is detected. This register can be clear to 0 by writing corresponded bit to 1 */ +#define PMU_IOAINT_IOAINT PMU_IOAINT_Msk /*!< Each bit represents the IOA's interrupt status. The corresponded bit will be set to 1 when corresponded wake-up event is detected. This register can be clear to 0 by writing corresponded bit to 1 */ /************** Bits definition for PMU_IOADR register ******************/ #define PMU_IOADR_IOA0DR_Pos (0U) #define PMU_IOADR_IOA0DR_Msk (0x1U << PMU_IOADR_IOA0DR_Pos) /*!< 0x00000001 */ -#define PMU_IOADR_IOA0DR PMU_IOADR_IOA0DR_Msk /*!< IOA0��s driving strength setting, change to this register will change all setting of IOA0~IOA15 */ +#define PMU_IOADR_IOA0DR PMU_IOADR_IOA0DR_Msk /*!< IOA0's driving strength setting, change to this register will change all setting of IOA0~IOA15 */ #define PMU_IOADR_IOAXDR_Pos (1U) #define PMU_IOADR_IOAXDR_Msk (0x7FFFU << PMU_IOADR_IOAXDR_Pos) /*!< 0x0000FFFE */ #define PMU_IOADR_IOAXDR PMU_IOADR_IOAXDR_Msk /*!< Each bit represent the current driving strength setting of IOA1~IOA15 */ @@ -853,13 +853,13 @@ typedef struct //#define ANA_REG1_ADC_SEL_11 (0xBU << ANA_REG1_ADC_SEL_Pos) #define ANA_REG1_RESDIV_Pos (4U) #define ANA_REG1_RESDIV_Msk (0x1U << ANA_REG1_RESDIV_Pos) /*!< 0x00000010 */ -#define ANA_REG1_RESDIV ANA_REG1_RESDIV_Msk /*!< Enable resistor division for M ADC��s input signal */ +#define ANA_REG1_RESDIV ANA_REG1_RESDIV_Msk /*!< Enable resistor division for M ADC's input signal */ #define ANA_REG1_GDE4_Pos (5U) #define ANA_REG1_GDE4_Msk (0x1U << ANA_REG1_GDE4_Pos) /*!< 0x00000020 */ -#define ANA_REG1_GDE4 ANA_REG1_GDE4_Msk /*!< Enable cap division for M ADC��s input signal */ +#define ANA_REG1_GDE4 ANA_REG1_GDE4_Msk /*!< Enable cap division for M ADC's input signal */ //#define ANA_REG1_PRES_EN_Pos (6U) //#define ANA_REG1_PRES_EN_Msk (0x1U << ANA_REG1_PRES_EN_Pos) /*!< 0x00000040 */ -//#define ANA_REG1_PRES_EN ANA_REG1_PRES_EN_Msk /*!< Enable pull down resistor for M ADC��s input signal */ +//#define ANA_REG1_PRES_EN ANA_REG1_PRES_EN_Msk /*!< Enable pull down resistor for M ADC's input signal */ //#define ANA_REG1_ADCRSTM_Pos (7U) //#define ANA_REG1_ADCRSTM_Msk (0x1U << ANA_REG1_ADCRSTM_Pos) /*!< 0x00000080 */ //#define ANA_REG1_ADCRSTM ANA_REG1_ADCRSTM_Msk /*!< */ @@ -1228,7 +1228,7 @@ typedef struct #define ANA_REGD_AVCCTRIM_7 (0x7U << ANA_REGD_AVCCTRIM_Pos) #define ANA_REGD_VREFTRIM_Pos (6U) #define ANA_REGD_VREFTRIM_Msk (0x3U << ANA_REGD_VREFTRIM_Pos) /*!< 0x000000C0 */ -#define ANA_REGD_VREFTRIM ANA_REGD_VREFTRIM_Msk /*!< Trimming of VREF, which will affect DVCC/33��s output by same ratio */ +#define ANA_REGD_VREFTRIM ANA_REGD_VREFTRIM_Msk /*!< Trimming of VREF, which will affect DVCC/33's output by same ratio */ #define ANA_REGD_VREFTRIM_0 (0x0U << ANA_REGD_VREFTRIM_Pos) #define ANA_REGD_VREFTRIM_1 (0x1U << ANA_REGD_VREFTRIM_Pos) #define ANA_REGD_VREFTRIM_2 (0x2U << ANA_REGD_VREFTRIM_Pos) @@ -1697,7 +1697,7 @@ typedef struct /************** Bits definition for RTC_PWD register ******************/ #define RTC_PWD_PWDEN_Pos (0U) #define RTC_PWD_PWDEN_Msk (0x1U << RTC_PWD_PWDEN_Pos) /*!< 0x00000001 */ -#define RTC_PWD_PWDEN RTC_PWD_PWDEN_Msk /*!< This register is used to protect the RTC_CE port��s access. Before access the RTC_CE, programmer should write 0x5AA55AA5 to this port, and the PWDEN will be set to 1. This bit will be cleared automatically after any write to RTC_CE port. Which means programmer should write to this port again before next access to RTC_CE port */ +#define RTC_PWD_PWDEN RTC_PWD_PWDEN_Msk /*!< This register is used to protect the RTC_CE port's access. Before access the RTC_CE, programmer should write 0x5AA55AA5 to this port, and the PWDEN will be set to 1. This bit will be cleared automatically after any write to RTC_CE port. Which means programmer should write to this port again before next access to RTC_CE port */ /************** Bits definition for RTC_CE register ******************/ #define RTC_CE_CE_Pos (0U) @@ -2056,7 +2056,7 @@ typedef struct /************** Bits definition for FLASH_CONF register ******************/ //#define FLASH_CONF_Pos (0U) //#define FLASH_CONF_Msk (0xFFFFFFFFU << FLASH_CONF_Pos) /*!< 0xFFFFFFFF */ -//#define FLASH_CONF_CONF FLASH_CONF_Msk /*!< This register is used to read/write the Flash IP��s configuration register */ +//#define FLASH_CONF_CONF FLASH_CONF_Msk /*!< This register is used to read/write the Flash IP's configuration register */ /************** Bits definition for FLASH_SERASE register ******************/ #define FLASH_SERASE_Pos (0U) @@ -2092,38 +2092,38 @@ typedef struct /************** Bits definition for IOx_OEN register ******************/ #define IOx_OEN_IOXOEN_Pos (0U) #define IOx_OEN_IOXOEN_Msk (0xFFFFU << IOx_OEN_IOXOEN_Pos) /*!< 0x0000FFFF */ -#define IOx_OEN_IOXOEN IOx_OEN_IOXOEN_Msk /*!< Each bit control the IOX��s output enable signal */ +#define IOx_OEN_IOXOEN IOx_OEN_IOXOEN_Msk /*!< Each bit control the IOX's output enable signal */ /************** Bits definition for IOx_IE register ******************/ #define IOx_IE_IOXIE_Pos (0U) #define IOx_IE_IOXIE_Msk (0xFFFFU << IOx_IE_IOXIE_Pos) /*!< 0x0000FFFF */ -#define IOx_IE_IOXIE IOx_IE_IOXIE_Msk /*!< Each bit control the IOX��s input enable signal */ +#define IOx_IE_IOXIE IOx_IE_IOXIE_Msk /*!< Each bit control the IOX's input enable signal */ /************** Bits definition for IOx_DAT register ******************/ #define IOx_DAT_IOXDAT_Pos (0U) #define IOx_DAT_IOXDAT_Msk (0xFFFFU << IOx_DAT_IOXDAT_Pos) /*!< 0x0000FFFF */ -#define IOx_DAT_IOXDAT IOx_DAT_IOXDAT_Msk /*!< Each bit control the IOX��s output data and pull low/high function */ +#define IOx_DAT_IOXDAT IOx_DAT_IOXDAT_Msk /*!< Each bit control the IOX's output data and pull low/high function */ /************** Bits definition for IOx_ATT register ******************/ #define IOx_ATT_IOXATT_Pos (0U) #define IOx_ATT_IOXATT_Msk (0xFFFFU << IOx_ATT_IOXATT_Pos) /*!< 0x0000FFFF */ -#define IOx_ATT_IOXATT IOx_ATT_IOXATT_Msk /*!< Each bit control the IOX��s attribute and pull low/high function */ +#define IOx_ATT_IOXATT IOx_ATT_IOXATT_Msk /*!< Each bit control the IOX's attribute and pull low/high function */ /************** Bits definition for IOx_STS register ******************/ #define IOx_STS_IOXSTS_Pos (0U) #define IOx_STS_IOXSTS_Msk (0xFFFFU << IOx_STS_IOXSTS_Pos) /*!< 0x0000FFFF */ -#define IOx_STS_IOXSTS IOx_STS_IOXSTS_Msk /*!< Each bit represents the current IOX��s input data value */ +#define IOx_STS_IOXSTS IOx_STS_IOXSTS_Msk /*!< Each bit represents the current IOX's input data value */ ///************** Bits definition for IOx_CM register ******************/ //#define IOx_CM_IOXCM0_Pos (0U) //#define IOx_CM_IOXCM0_Msk (0x1U << IOx_CM_IOXCM0_Pos) /*!< 0x00000001 */ -//#define IOx_CM_IOXCM0 IOx_CM_IOXCM0_Msk /*!< IOX0��s Schmitt trigger setting, change to this register will change all setting of IOX0~IOX7 */ +//#define IOx_CM_IOXCM0 IOx_CM_IOXCM0_Msk /*!< IOX0's Schmitt trigger setting, change to this register will change all setting of IOX0~IOX7 */ //#define IOx_CM_IOXCM1_7_Pos (1U) //#define IOx_CM_IOXCM1_7_Msk (0x7FU << IOx_CM_IOXCM1_7_Pos) /*!< 0x000000FE */ //#define IOx_CM_IOXCM1_7 IOx_CM_IOXCM1_7_Msk /*!< Each bit represent the current Schmitt trigger setting of IOX1~IOX7 */ //#define IOx_CM_IOXCM8_Pos (8U) //#define IOx_CM_IOXCM8_Msk (0x1U << IOx_CM_IOXCM8_Pos) /*!< 0x00000100 */ -//#define IOx_CM_IOXCM8 IOx_CM_IOXCM8_Msk /*!< IOX8��s Schmitt trigger setting, change to this register will change all setting of IOX8~IOX15 */ +//#define IOx_CM_IOXCM8 IOx_CM_IOXCM8_Msk /*!< IOX8's Schmitt trigger setting, change to this register will change all setting of IOX8~IOX15 */ //#define IOx_CM_IOXCM9_15_Pos (9U) //#define IOx_CM_IOXCM9_15_Msk (0x7FU << IOx_CM_IOXCM9_15_Pos) /*!< 0x0000FE00 */ //#define IOx_CM_IOXCM9_15 IOx_CM_IOXCM9_15_Msk /*!< Each bit represent the current Schmitt trigger setting of IOX9~IOX15 */ @@ -2131,13 +2131,13 @@ typedef struct ///************** Bits definition for IOx_SR register ******************/ //#define IOx_SR_IOXSR0_Pos (0U) //#define IOx_SR_IOXSR0_Msk (0x1U << IOx_SR_IOXSR0_Pos) /*!< 0x00000001 */ -//#define IOx_SR_IOXSR0 IOx_SR_IOXSR0_Msk /*!< IOX0��s slew rate setting, change to this register will change all setting of IOX0~IOX7 */ +//#define IOx_SR_IOXSR0 IOx_SR_IOXSR0_Msk /*!< IOX0's slew rate setting, change to this register will change all setting of IOX0~IOX7 */ //#define IOx_SR_IOXSR1_7_Pos (1U) //#define IOx_SR_IOXSR1_7_Msk (0x7FU << IOx_SR_IOXSR1_7_Pos) /*!< 0x000000FE */ //#define IOx_SR_IOXSR1_7 IOx_SR_IOXSR1_7_Msk /*!< Each bit represent the current slew rate setting of IOX1~IOX7 */ //#define IOx_SR_IOXSR8_Pos (8U) //#define IOx_SR_IOXSR8_Msk (0x1U << IOx_SR_IOXSR8_Pos) /*!< 0x00000100 */ -//#define IOx_SR_IOXSR8 IOx_SR_IOXSR8_Msk /*!< IOX8��s slew rate setting, change to this register will change all setting of IOX8~IOX15 */ +//#define IOx_SR_IOXSR8 IOx_SR_IOXSR8_Msk /*!< IOX8's slew rate setting, change to this register will change all setting of IOX8~IOX15 */ //#define IOx_SR_IOXSR9_15_Pos (9U) //#define IOx_SR_IOXSR9_15_Msk (0x7FU << IOx_SR_IOXSR9_15_Pos) /*!< 0x0000FE00 */ //#define IOx_SR_IOXSR9_15 IOx_SR_IOXSR9_15_Msk /*!< Each bit represent the current slew rate setting of IOX9~IOX15 */ @@ -2145,13 +2145,13 @@ typedef struct ///************** Bits definition for IOx_DR register ******************/ //#define IOx_DR_IOXDR0_Pos (0U) //#define IOx_DR_IOXDR0_Msk (0x1U << IOx_DR_IOXDR0_Pos) /*!< 0x00000001 */ -//#define IOx_DR_IOXDR0 IOx_DR_IOXDR0_Msk /*!< IOX0��s driving strength setting, change to this register will change all setting of IOX0~IOX7 */ +//#define IOx_DR_IOXDR0 IOx_DR_IOXDR0_Msk /*!< IOX0's driving strength setting, change to this register will change all setting of IOX0~IOX7 */ //#define IOx_DR_IOXDR1_7_Pos (1U) //#define IOx_DR_IOXDR1_7_Msk (0x7FU << IOx_DR_IOXDR1_7_Pos) /*!< 0x000000FE */ //#define IOx_DR_IOXDR1_7 IOx_DR_IOXDR1_7_Msk /*!< Each bit represent the current driving strength setting of IOX1~IOX7 */ //#define IOx_DR_IOXDR8_Pos (8U) //#define IOx_DR_IOXDR8_Msk (0x1U << IOx_DR_IOXDR8_Pos) /*!< 0x00000100 */ -//#define IOx_DR_IOXDR8 IOx_DR_IOXDR8_Msk /*!< IOX8��s driving strength setting, change to this register will change all setting of IOX8~IOX15 */ +//#define IOx_DR_IOXDR8 IOx_DR_IOXDR8_Msk /*!< IOX8's driving strength setting, change to this register will change all setting of IOX8~IOX15 */ //#define IOx_DR_IOXDR9_15_Pos (9U) //#define IOx_DR_IOXDR9_15_Msk (0x7FU << IOx_DR_IOXDR9_15_Pos) /*!< 0x0000FE00 */ //#define IOx_DR_IOXDR9_15 IOx_DR_IOXDR9_15_Msk /*!< Each bit represent the current driving strength setting of IOX9~IOX15 */ @@ -2176,7 +2176,7 @@ typedef struct /************** Bits definition for IO_MISC register ******************/ #define IO_MISC_PLLHDIV_Pos (0U) #define IO_MISC_PLLHDIV_Msk (0x7U << IO_MISC_PLLHDIV_Pos) /*!< 0x00000007 */ -#define IO_MISC_PLLHDIV IO_MISC_PLLHDIV_Msk /*!< When IOB1 is selected to special function 3, this register is used to control the divide ratio of PLLH��s output */ +#define IO_MISC_PLLHDIV IO_MISC_PLLHDIV_Msk /*!< When IOB1 is selected to special function 3, this register is used to control the divide ratio of PLLH's output */ #define IO_MISC_PLLHDIV_1 (0x0U << IO_MISC_PLLHDIV_Pos) #define IO_MISC_PLLHDIV_2 (0x1U << IO_MISC_PLLHDIV_Pos) #define IO_MISC_PLLHDIV_4 (0x2U << IO_MISC_PLLHDIV_Pos) @@ -2632,7 +2632,7 @@ typedef struct #define ISO7816_INFO_RCACK ISO7816_INFO_RCACK_Msk /*!< The received ACK at the end of transmit */ #define ISO7816_INFO_CHKSUM_Pos (1U) #define ISO7816_INFO_CHKSUM_Msk (0x1U << ISO7816_INFO_CHKSUM_Pos) /*!< 0x00000002 */ -#define ISO7816_INFO_CHKSUM ISO7816_INFO_CHKSUM_Msk /*!< The transmitted or received data��s check sum bit */ +#define ISO7816_INFO_CHKSUM ISO7816_INFO_CHKSUM_Msk /*!< The transmitted or received data's check sum bit */ #define ISO7816_INFO_RCERR_Pos (2U) #define ISO7816_INFO_RCERR_Msk (0x1U << ISO7816_INFO_RCERR_Pos) /*!< 0x00000004 */ #define ISO7816_INFO_RCERR ISO7816_INFO_RCERR_Msk /*!< When received data have check sum error */ @@ -2858,10 +2858,10 @@ typedef struct /************** Bits definition for PWMx_CTL register ******************/ #define PWM_CTL_IFG_Pos (0U) #define PWM_CTL_IFG_Msk (0x1U << PWM_CTL_IFG_Pos) /*!< 0x00000001 */ -#define PWM_CTL_IFG PWM_CTL_IFG_Msk /*!< PWM Timer x��s interrupt status flag, write 1 to clear this flag to 0 */ +#define PWM_CTL_IFG PWM_CTL_IFG_Msk /*!< PWM Timer x's interrupt status flag, write 1 to clear this flag to 0 */ #define PWM_CTL_IE_Pos (1U) #define PWM_CTL_IE_Msk (0x1U << PWM_CTL_IE_Pos) /*!< 0x00000002 */ -#define PWM_CTL_IE PWM_CTL_IE_Msk /*!< PWM Timer x��s interrupt enable register */ +#define PWM_CTL_IE PWM_CTL_IE_Msk /*!< PWM Timer x's interrupt enable register */ #define PWM_CTL_CLR_Pos (2U) #define PWM_CTL_CLR_Msk (0x1U << PWM_CTL_CLR_Pos) /*!< 0x00000004 */ #define PWM_CTL_CLR PWM_CTL_CLR_Msk /*!< TAR clear register, when this bit is set to 1, the TAR will be clear to 0 */ @@ -2879,7 +2879,7 @@ typedef struct #define PWM_CTL_MC_UPDOWN (0x3U << PWM_CTL_MC_Pos) /*!< 0x00000030 */ #define PWM_CTL_ID_Pos (6U) #define PWM_CTL_ID_Msk (0x3U << PWM_CTL_ID_Pos) /*!< 0x000000C0 */ -#define PWM_CTL_ID PWM_CTL_ID_Msk /*!< PWM timer x��s Input clock divider control */ +#define PWM_CTL_ID PWM_CTL_ID_Msk /*!< PWM timer x's Input clock divider control */ #define PWM_CTL_ID_DIV2 (0x0U << PWM_CTL_ID_Pos) /*!< 0x00000000 */ #define PWM_CTL_ID_DIV4 (0x1U << PWM_CTL_ID_Pos) /*!< 0x00000040 */ #define PWM_CTL_ID_DIV8 (0x2U << PWM_CTL_ID_Pos) /*!< 0x00000080 */ @@ -2888,7 +2888,7 @@ typedef struct /************** Bits definition for PWMx_TAR register ******************/ #define PWM_TAR_TAR_Pos (0U) #define PWM_TAR_TAR_Msk (0xFFFFU << PWM_TAR_TAR_Pos) /*!< 0x0000FFFF */ -#define PWM_TAR_TAR PWM_TAR_TAR_Msk /*!< PWM Timer x��s current count register */ +#define PWM_TAR_TAR PWM_TAR_TAR_Msk /*!< PWM Timer x's current count register */ /************** Bits definition for PWMx_CCTLy register ******************/ #define PWM_CCTL_CCIGG_Pos (0U) @@ -2902,7 +2902,7 @@ typedef struct #define PWM_CCTL_OUT PWM_CCTL_OUT_Msk /*!< This bit is used to control the output value of OUTx when OUTMOD is set to 0 */ //#define PWM_CCTL_CCI_Pos (3U) //#define PWM_CCTL_CCI_Msk (0x1U << PWM_CCTL_CCI_Pos) /*!< 0x00000008 */ -//#define PWM_CCTL_CCI PWM_CCTL_CCI_Msk /*!< The read only register shows the current status of INx��s input */ +//#define PWM_CCTL_CCI PWM_CCTL_CCI_Msk /*!< The read only register shows the current status of INx's input */ #define PWM_CCTL_CCIE_Pos (4U) #define PWM_CCTL_CCIE_Msk (0x1U << PWM_CCTL_CCIE_Pos) /*!< 0x00000010 */ #define PWM_CCTL_CCIE PWM_CCTL_CCIE_Msk /*!< Compare interrupt enable register */ @@ -2925,7 +2925,7 @@ typedef struct #define PWM_CCTL_OUTEN PWM_CCTL_OUTEN_Msk /*!< OUTx output enable control register */ //#define PWM_CCTL_SCCI_Pos (10U) //#define PWM_CCTL_SCCI_Msk (0x1U << PWM_CCTL_SCCI_Pos) /*!< 0x00000400 */ -//#define PWM_CCTL_SCCI PWM_CCTL_SCCI_Msk /*!< The read only register shows the INx��s input value when the TAR is equal to CCRx */ +//#define PWM_CCTL_SCCI PWM_CCTL_SCCI_Msk /*!< The read only register shows the INx's input value when the TAR is equal to CCRx */ //#define PWM_CCTL_CM_Pos (14U) //#define PWM_CCTL_CM_Msk (0x3U << PWM_CCTL_CM_Pos) /*!< 0x0000C000 */ //#define PWM_CCTL_CM PWM_CCTL_CM_Msk /*!< Capture edge selection */ @@ -2942,56 +2942,56 @@ typedef struct /************** Bits definition for PWM_O_SEL register ******************/ #define PWM_O_SEL_O_SEL0_Pos (0U) #define PWM_O_SEL_O_SEL0_Msk (0xFU << PWM_O_SEL_O_SEL0_Pos) /*!< 0x0000000F */ -#define PWM_O_SEL_O_SEL0 PWM_O_SEL_O_SEL0_Msk /*!< External output PWM0��s output selection register */ +#define PWM_O_SEL_O_SEL0 PWM_O_SEL_O_SEL0_Msk /*!< External output PWM0's output selection register */ #define PWM_O_SEL_O_SEL1_Pos (4U) #define PWM_O_SEL_O_SEL1_Msk (0xFU << PWM_O_SEL_O_SEL1_Pos) /*!< 0x000000F0 */ -#define PWM_O_SEL_O_SEL1 PWM_O_SEL_O_SEL1_Msk /*!< External output PWM1��s output selection register */ +#define PWM_O_SEL_O_SEL1 PWM_O_SEL_O_SEL1_Msk /*!< External output PWM1's output selection register */ #define PWM_O_SEL_O_SEL2_Pos (8U) #define PWM_O_SEL_O_SEL2_Msk (0xFU << PWM_O_SEL_O_SEL2_Pos) /*!< 0x000000F00 */ -#define PWM_O_SEL_O_SEL2 PWM_O_SEL_O_SEL2_Msk /*!< External output PWM2��s output selection register */ +#define PWM_O_SEL_O_SEL2 PWM_O_SEL_O_SEL2_Msk /*!< External output PWM2's output selection register */ #define PWM_O_SEL_O_SEL3_Pos (12U) #define PWM_O_SEL_O_SEL3_Msk (0xFU << PWM_O_SEL_O_SEL3_Pos) /*!< 0x0000F000 */ -#define PWM_O_SEL_O_SEL3 PWM_O_SEL_O_SEL3_Msk /*!< External output PWM3��s output selection register */ +#define PWM_O_SEL_O_SEL3 PWM_O_SEL_O_SEL3_Msk /*!< External output PWM3's output selection register */ ///************** Bits definition for PWM_I_SEL01 register ******************/ //#define PWM_I_SEL01_I_SEL00_Pos (0U) //#define PWM_I_SEL01_I_SEL00_Msk (0x3U << PWM_I_SEL01_I_SEL00_Pos) /*!< 0x00000003 */ -//#define PWM_I_SEL01_I_SEL00 PWM_I_SEL01_I_SEL00_Msk /*!< PWM0��s IN0 external input control */ +//#define PWM_I_SEL01_I_SEL00 PWM_I_SEL01_I_SEL00_Msk /*!< PWM0's IN0 external input control */ //#define PWM_I_SEL01_I_SEL01_Pos (2U) //#define PWM_I_SEL01_I_SEL01_Msk (0x3U << PWM_I_SEL01_I_SEL01_Pos) /*!< 0x000000C */ -//#define PWM_I_SEL01_I_SEL01 PWM_I_SEL01_I_SEL01_Msk /*!< PWM0��s IN1 external input control */ +//#define PWM_I_SEL01_I_SEL01 PWM_I_SEL01_I_SEL01_Msk /*!< PWM0's IN1 external input control */ //#define PWM_I_SEL01_I_SEL02_Pos (4U) //#define PWM_I_SEL01_I_SEL02_Msk (0x3U << PWM_I_SEL01_I_SEL02_Pos) /*!< 0x00000030 */ -//#define PWM_I_SEL01_I_SEL02 PWM_I_SEL01_I_SEL02_Msk /*!< PWM0��s IN2 external input control */ +//#define PWM_I_SEL01_I_SEL02 PWM_I_SEL01_I_SEL02_Msk /*!< PWM0's IN2 external input control */ //#define PWM_I_SEL01_I_SEL10_Pos (16U) //#define PWM_I_SEL01_I_SEL10_Msk (0x3U << PWM_I_SEL01_I_SEL10_Pos) /*!< 0x00030000 */ -//#define PWM_I_SEL01_I_SEL10 PWM_I_SEL01_I_SEL10_Msk /*!< PWM1��s IN0 external input control */ +//#define PWM_I_SEL01_I_SEL10 PWM_I_SEL01_I_SEL10_Msk /*!< PWM1's IN0 external input control */ //#define PWM_I_SEL01_I_SEL11_Pos (18U) //#define PWM_I_SEL01_I_SEL11_Msk (0x3U << PWM_I_SEL01_I_SEL11_Pos) /*!< 0x000C0000 */ -//#define PWM_I_SEL01_I_SEL11 PWM_I_SEL01_I_SEL11_Msk /*!< PWM1��s IN1 external input control */ +//#define PWM_I_SEL01_I_SEL11 PWM_I_SEL01_I_SEL11_Msk /*!< PWM1's IN1 external input control */ //#define PWM_I_SEL01_I_SEL12_Pos (20U) //#define PWM_I_SEL01_I_SEL12_Msk (0x3U << PWM_I_SEL01_I_SEL12_Pos) /*!< 0x00300000 */ -//#define PWM_I_SEL01_I_SEL12 PWM_I_SEL01_I_SEL12_Msk /*!< PWM1��s IN2 external input control */ +//#define PWM_I_SEL01_I_SEL12 PWM_I_SEL01_I_SEL12_Msk /*!< PWM1's IN2 external input control */ // ///************** Bits definition for PWM_I_SEL23 register ******************/ //#define PWM_I_SEL23_I_SEL20_Pos (0U) //#define PWM_I_SEL23_I_SEL20_Msk (0x3U << PWM_I_SEL23_I_SEL20_Pos) /*!< 0x00000003 */ -//#define PWM_I_SEL23_I_SEL20 PWM_I_SEL23_I_SEL20_Msk /*!< PWM2��s IN0 external input control */ +//#define PWM_I_SEL23_I_SEL20 PWM_I_SEL23_I_SEL20_Msk /*!< PWM2's IN0 external input control */ //#define PWM_I_SEL23_I_SEL21_Pos (2U) //#define PWM_I_SEL23_I_SEL21_Msk (0x3U << PWM_I_SEL23_I_SEL21_Pos) /*!< 0x0000000C */ -//#define PWM_I_SEL23_I_SEL21 PWM_I_SEL23_I_SEL21_Msk /*!< PWM2��s IN1 external input control */ +//#define PWM_I_SEL23_I_SEL21 PWM_I_SEL23_I_SEL21_Msk /*!< PWM2's IN1 external input control */ //#define PWM_I_SEL23_I_SEL22_Pos (4U) //#define PWM_I_SEL23_I_SEL22_Msk (0x3U << PWM_I_SEL23_I_SEL22_Pos) /*!< 0x00000030 */ -//#define PWM_I_SEL23_I_SEL22 PWM_I_SEL23_I_SEL22_Msk /*!< PWM2��s IN2 external input control */ +//#define PWM_I_SEL23_I_SEL22 PWM_I_SEL23_I_SEL22_Msk /*!< PWM2's IN2 external input control */ //#define PWM_I_SEL23_I_SEL30_Pos (16U) //#define PWM_I_SEL23_I_SEL30_Msk (0x3U << PWM_I_SEL23_I_SEL30_Pos) /*!< 0x00030000 */ -//#define PWM_I_SEL23_I_SEL30 PWM_I_SEL23_I_SEL30_Msk /*!< PWM3��s IN0 external input control */ +//#define PWM_I_SEL23_I_SEL30 PWM_I_SEL23_I_SEL30_Msk /*!< PWM3's IN0 external input control */ //#define PWM_I_SEL23_I_SEL31_Pos (18U) //#define PWM_I_SEL23_I_SEL31_Msk (0x3U << PWM_I_SEL23_I_SEL31_Pos) /*!< 0x000C0000 */ -//#define PWM_I_SEL23_I_SEL31 PWM_I_SEL23_I_SEL31_Msk /*!< PWM3��s IN1 external input control */ +//#define PWM_I_SEL23_I_SEL31 PWM_I_SEL23_I_SEL31_Msk /*!< PWM3's IN1 external input control */ //#define PWM_I_SEL23_I_SEL32_Pos (20U) //#define PWM_I_SEL23_I_SEL32_Msk (0x3U << PWM_I_SEL23_I_SEL32_Pos) /*!< 0x00300000 */ -//#define PWM_I_SEL23_I_SEL32 PWM_I_SEL23_I_SEL32_Msk /*!< PWM3��s IN2 external input control */ +//#define PWM_I_SEL23_I_SEL32 PWM_I_SEL23_I_SEL32_Msk /*!< PWM3's IN2 external input control */ /******************************************************************************/ /* */ @@ -3058,248 +3058,248 @@ typedef struct /************** Bits definition for LCD_SEGCTRL0 register ******************/ #define LCD_SEGCTRL0_SEG0_Pos (0U) #define LCD_SEGCTRL0_SEG0_Msk (0x1U << LCD_SEGCTRL0_SEG0_Pos) /*!< 0x00000001 */ -#define LCD_SEGCTRL0_SEG0 LCD_SEGCTRL0_SEG0_Msk /*!< SEG 0��s enable control */ +#define LCD_SEGCTRL0_SEG0 LCD_SEGCTRL0_SEG0_Msk /*!< SEG 0's enable control */ #define LCD_SEGCTRL0_SEG1_Pos (1U) #define LCD_SEGCTRL0_SEG1_Msk (0x1U << LCD_SEGCTRL0_SEG1_Pos) /*!< 0x00000002 */ -#define LCD_SEGCTRL0_SEG1 LCD_SEGCTRL0_SEG1_Msk /*!< SEG 1��s enable control */ +#define LCD_SEGCTRL0_SEG1 LCD_SEGCTRL0_SEG1_Msk /*!< SEG 1's enable control */ #define LCD_SEGCTRL0_SEG2_Pos (2U) #define LCD_SEGCTRL0_SEG2_Msk (0x1U << LCD_SEGCTRL0_SEG2_Pos) /*!< 0x00000004 */ -#define LCD_SEGCTRL0_SEG2 LCD_SEGCTRL0_SEG2_Msk /*!< SEG 2��s enable control */ +#define LCD_SEGCTRL0_SEG2 LCD_SEGCTRL0_SEG2_Msk /*!< SEG 2's enable control */ #define LCD_SEGCTRL0_SEG3_Pos (3U) #define LCD_SEGCTRL0_SEG3_Msk (0x1U << LCD_SEGCTRL0_SEG3_Pos) /*!< 0x00000008 */ -#define LCD_SEGCTRL0_SEG3 LCD_SEGCTRL0_SEG3_Msk /*!< SEG 3��s enable control */ +#define LCD_SEGCTRL0_SEG3 LCD_SEGCTRL0_SEG3_Msk /*!< SEG 3's enable control */ #define LCD_SEGCTRL0_SEG4_Pos (4U) #define LCD_SEGCTRL0_SEG4_Msk (0x1U << LCD_SEGCTRL0_SEG4_Pos) /*!< 0x00000010 */ -#define LCD_SEGCTRL0_SEG4 LCD_SEGCTRL0_SEG4_Msk /*!< SEG 4��s enable control */ +#define LCD_SEGCTRL0_SEG4 LCD_SEGCTRL0_SEG4_Msk /*!< SEG 4's enable control */ #define LCD_SEGCTRL0_SEG5_Pos (5U) #define LCD_SEGCTRL0_SEG5_Msk (0x1U << LCD_SEGCTRL0_SEG5_Pos) /*!< 0x00000020 */ -#define LCD_SEGCTRL0_SEG5 LCD_SEGCTRL0_SEG5_Msk /*!< SEG 5��s enable control */ +#define LCD_SEGCTRL0_SEG5 LCD_SEGCTRL0_SEG5_Msk /*!< SEG 5's enable control */ #define LCD_SEGCTRL0_SEG6_Pos (6U) #define LCD_SEGCTRL0_SEG6_Msk (0x1U << LCD_SEGCTRL0_SEG6_Pos) /*!< 0x00000040 */ -#define LCD_SEGCTRL0_SEG6 LCD_SEGCTRL0_SEG6_Msk /*!< SEG 6��s enable control */ +#define LCD_SEGCTRL0_SEG6 LCD_SEGCTRL0_SEG6_Msk /*!< SEG 6's enable control */ #define LCD_SEGCTRL0_SEG7_Pos (7U) #define LCD_SEGCTRL0_SEG7_Msk (0x1U << LCD_SEGCTRL0_SEG7_Pos) /*!< 0x00000080 */ -#define LCD_SEGCTRL0_SEG7 LCD_SEGCTRL0_SEG7_Msk /*!< SEG 7��s enable control */ +#define LCD_SEGCTRL0_SEG7 LCD_SEGCTRL0_SEG7_Msk /*!< SEG 7's enable control */ #define LCD_SEGCTRL0_SEG8_Pos (8U) #define LCD_SEGCTRL0_SEG8_Msk (0x1U << LCD_SEGCTRL0_SEG8_Pos) /*!< 0x00000100 */ -#define LCD_SEGCTRL0_SEG8 LCD_SEGCTRL0_SEG8_Msk /*!< SEG 8��s enable control */ +#define LCD_SEGCTRL0_SEG8 LCD_SEGCTRL0_SEG8_Msk /*!< SEG 8's enable control */ #define LCD_SEGCTRL0_SEG9_Pos (9U) #define LCD_SEGCTRL0_SEG9_Msk (0x1U << LCD_SEGCTRL0_SEG9_Pos) /*!< 0x00000200 */ -#define LCD_SEGCTRL0_SEG9 LCD_SEGCTRL0_SEG9_Msk /*!< SEG 9��s enable control */ +#define LCD_SEGCTRL0_SEG9 LCD_SEGCTRL0_SEG9_Msk /*!< SEG 9's enable control */ #define LCD_SEGCTRL0_SEG10_Pos (10U) #define LCD_SEGCTRL0_SEG10_Msk (0x1U << LCD_SEGCTRL0_SEG10_Pos) /*!< 0x00000400 */ -#define LCD_SEGCTRL0_SEG10 LCD_SEGCTRL0_SEG10_Msk /*!< SEG 10��s enable control */ +#define LCD_SEGCTRL0_SEG10 LCD_SEGCTRL0_SEG10_Msk /*!< SEG 10's enable control */ #define LCD_SEGCTRL0_SEG11_Pos (11U) #define LCD_SEGCTRL0_SEG11_Msk (0x1U << LCD_SEGCTRL0_SEG11_Pos) /*!< 0x00000800 */ -#define LCD_SEGCTRL0_SEG11 LCD_SEGCTRL0_SEG11_Msk /*!< SEG 11��s enable control */ +#define LCD_SEGCTRL0_SEG11 LCD_SEGCTRL0_SEG11_Msk /*!< SEG 11's enable control */ #define LCD_SEGCTRL0_SEG12_Pos (12U) #define LCD_SEGCTRL0_SEG12_Msk (0x1U << LCD_SEGCTRL0_SEG12_Pos) /*!< 0x00001000 */ -#define LCD_SEGCTRL0_SEG12 LCD_SEGCTRL0_SEG12_Msk /*!< SEG 12��s enable control */ +#define LCD_SEGCTRL0_SEG12 LCD_SEGCTRL0_SEG12_Msk /*!< SEG 12's enable control */ #define LCD_SEGCTRL0_SEG13_Pos (13U) #define LCD_SEGCTRL0_SEG13_Msk (0x1U << LCD_SEGCTRL0_SEG13_Pos) /*!< 0x00002000 */ -#define LCD_SEGCTRL0_SEG13 LCD_SEGCTRL0_SEG13_Msk /*!< SEG 13��s enable control */ +#define LCD_SEGCTRL0_SEG13 LCD_SEGCTRL0_SEG13_Msk /*!< SEG 13's enable control */ #define LCD_SEGCTRL0_SEG14_Pos (14U) #define LCD_SEGCTRL0_SEG14_Msk (0x1U << LCD_SEGCTRL0_SEG14_Pos) /*!< 0x00004000 */ -#define LCD_SEGCTRL0_SEG14 LCD_SEGCTRL0_SEG14_Msk /*!< SEG 14��s enable control */ +#define LCD_SEGCTRL0_SEG14 LCD_SEGCTRL0_SEG14_Msk /*!< SEG 14's enable control */ #define LCD_SEGCTRL0_SEG15_Pos (15U) #define LCD_SEGCTRL0_SEG15_Msk (0x1U << LCD_SEGCTRL0_SEG15_Pos) /*!< 0x00008000 */ -#define LCD_SEGCTRL0_SEG15 LCD_SEGCTRL0_SEG15_Msk /*!< SEG 15��s enable control */ +#define LCD_SEGCTRL0_SEG15 LCD_SEGCTRL0_SEG15_Msk /*!< SEG 15's enable control */ #define LCD_SEGCTRL0_SEG16_Pos (16U) #define LCD_SEGCTRL0_SEG16_Msk (0x1U << LCD_SEGCTRL0_SEG16_Pos) /*!< 0x00010000 */ -#define LCD_SEGCTRL0_SEG16 LCD_SEGCTRL0_SEG16_Msk /*!< SEG 16��s enable control */ +#define LCD_SEGCTRL0_SEG16 LCD_SEGCTRL0_SEG16_Msk /*!< SEG 16's enable control */ #define LCD_SEGCTRL0_SEG17_Pos (17U) #define LCD_SEGCTRL0_SEG17_Msk (0x1U << LCD_SEGCTRL0_SEG17_Pos) /*!< 0x00020000 */ -#define LCD_SEGCTRL0_SEG17 LCD_SEGCTRL0_SEG17_Msk /*!< SEG 17��s enable control */ +#define LCD_SEGCTRL0_SEG17 LCD_SEGCTRL0_SEG17_Msk /*!< SEG 17's enable control */ #define LCD_SEGCTRL0_SEG18_Pos (18U) #define LCD_SEGCTRL0_SEG18_Msk (0x1U << LCD_SEGCTRL0_SEG18_Pos) /*!< 0x00040000 */ -#define LCD_SEGCTRL0_SEG18 LCD_SEGCTRL0_SEG18_Msk /*!< SEG 18��s enable control */ +#define LCD_SEGCTRL0_SEG18 LCD_SEGCTRL0_SEG18_Msk /*!< SEG 18's enable control */ #define LCD_SEGCTRL0_SEG19_Pos (19U) #define LCD_SEGCTRL0_SEG19_Msk (0x1U << LCD_SEGCTRL0_SEG19_Pos) /*!< 0x00080000 */ -#define LCD_SEGCTRL0_SEG19 LCD_SEGCTRL0_SEG19_Msk /*!< SEG 19��s enable control */ +#define LCD_SEGCTRL0_SEG19 LCD_SEGCTRL0_SEG19_Msk /*!< SEG 19's enable control */ #define LCD_SEGCTRL0_SEG20_Pos (20U) #define LCD_SEGCTRL0_SEG20_Msk (0x1U << LCD_SEGCTRL0_SEG20_Pos) /*!< 0x00100000 */ -#define LCD_SEGCTRL0_SEG20 LCD_SEGCTRL0_SEG20_Msk /*!< SEG 20��s enable control */ +#define LCD_SEGCTRL0_SEG20 LCD_SEGCTRL0_SEG20_Msk /*!< SEG 20's enable control */ #define LCD_SEGCTRL0_SEG21_Pos (21U) #define LCD_SEGCTRL0_SEG21_Msk (0x1U << LCD_SEGCTRL0_SEG21_Pos) /*!< 0x00200000 */ -#define LCD_SEGCTRL0_SEG21 LCD_SEGCTRL0_SEG21_Msk /*!< SEG 21��s enable control */ +#define LCD_SEGCTRL0_SEG21 LCD_SEGCTRL0_SEG21_Msk /*!< SEG 21's enable control */ #define LCD_SEGCTRL0_SEG22_Pos (22U) #define LCD_SEGCTRL0_SEG22_Msk (0x1U << LCD_SEGCTRL0_SEG22_Pos) /*!< 0x00400000 */ -#define LCD_SEGCTRL0_SEG22 LCD_SEGCTRL0_SEG22_Msk /*!< SEG 22��s enable control */ +#define LCD_SEGCTRL0_SEG22 LCD_SEGCTRL0_SEG22_Msk /*!< SEG 22's enable control */ #define LCD_SEGCTRL0_SEG23_Pos (23U) #define LCD_SEGCTRL0_SEG23_Msk (0x1U << LCD_SEGCTRL0_SEG23_Pos) /*!< 0x00800000 */ -#define LCD_SEGCTRL0_SEG23 LCD_SEGCTRL0_SEG23_Msk /*!< SEG 23��s enable control */ +#define LCD_SEGCTRL0_SEG23 LCD_SEGCTRL0_SEG23_Msk /*!< SEG 23's enable control */ #define LCD_SEGCTRL0_SEG24_Pos (24U) #define LCD_SEGCTRL0_SEG24_Msk (0x1U << LCD_SEGCTRL0_SEG24_Pos) /*!< 0x01000000 */ -#define LCD_SEGCTRL0_SEG24 LCD_SEGCTRL0_SEG24_Msk /*!< SEG 24��s enable control */ +#define LCD_SEGCTRL0_SEG24 LCD_SEGCTRL0_SEG24_Msk /*!< SEG 24's enable control */ #define LCD_SEGCTRL0_SEG25_Pos (25U) #define LCD_SEGCTRL0_SEG25_Msk (0x1U << LCD_SEGCTRL0_SEG25_Pos) /*!< 0x02000000 */ -#define LCD_SEGCTRL0_SEG25 LCD_SEGCTRL0_SEG25_Msk /*!< SEG 25��s enable control */ +#define LCD_SEGCTRL0_SEG25 LCD_SEGCTRL0_SEG25_Msk /*!< SEG 25's enable control */ #define LCD_SEGCTRL0_SEG26_Pos (26U) #define LCD_SEGCTRL0_SEG26_Msk (0x1U << LCD_SEGCTRL0_SEG26_Pos) /*!< 0x04000000 */ -#define LCD_SEGCTRL0_SEG26 LCD_SEGCTRL0_SEG26_Msk /*!< SEG 26��s enable control */ +#define LCD_SEGCTRL0_SEG26 LCD_SEGCTRL0_SEG26_Msk /*!< SEG 26's enable control */ #define LCD_SEGCTRL0_SEG27_Pos (27U) #define LCD_SEGCTRL0_SEG27_Msk (0x1U << LCD_SEGCTRL0_SEG27_Pos) /*!< 0x08000000 */ -#define LCD_SEGCTRL0_SEG27 LCD_SEGCTRL0_SEG27_Msk /*!< SEG 27��s enable control */ +#define LCD_SEGCTRL0_SEG27 LCD_SEGCTRL0_SEG27_Msk /*!< SEG 27's enable control */ #define LCD_SEGCTRL0_SEG28_Pos (28U) #define LCD_SEGCTRL0_SEG28_Msk (0x1U << LCD_SEGCTRL0_SEG28_Pos) /*!< 0x10000000 */ -#define LCD_SEGCTRL0_SEG28 LCD_SEGCTRL0_SEG28_Msk /*!< SEG 28��s enable control */ +#define LCD_SEGCTRL0_SEG28 LCD_SEGCTRL0_SEG28_Msk /*!< SEG 28's enable control */ #define LCD_SEGCTRL0_SEG29_Pos (29U) #define LCD_SEGCTRL0_SEG29_Msk (0x1U << LCD_SEGCTRL0_SEG29_Pos) /*!< 0x20000000 */ -#define LCD_SEGCTRL0_SEG29 LCD_SEGCTRL0_SEG29_Msk /*!< SEG 29��s enable control */ +#define LCD_SEGCTRL0_SEG29 LCD_SEGCTRL0_SEG29_Msk /*!< SEG 29's enable control */ #define LCD_SEGCTRL0_SEG30_Pos (30U) #define LCD_SEGCTRL0_SEG30_Msk (0x1U << LCD_SEGCTRL0_SEG30_Pos) /*!< 0x40000000 */ -#define LCD_SEGCTRL0_SEG30 LCD_SEGCTRL0_SEG30_Msk /*!< SEG 30��s enable control */ +#define LCD_SEGCTRL0_SEG30 LCD_SEGCTRL0_SEG30_Msk /*!< SEG 30's enable control */ #define LCD_SEGCTRL0_SEG31_Pos (31U) #define LCD_SEGCTRL0_SEG31_Msk (0x1U << LCD_SEGCTRL0_SEG31_Pos) /*!< 0x80000000 */ -#define LCD_SEGCTRL0_SEG31 LCD_SEGCTRL0_SEG31_Msk /*!< SEG 31��s enable control */ +#define LCD_SEGCTRL0_SEG31 LCD_SEGCTRL0_SEG31_Msk /*!< SEG 31's enable control */ /************** Bits definition for LCD_SEGCTRL1 register ******************/ #define LCD_SEGCTRL1_SEG32_Pos (0U) #define LCD_SEGCTRL1_SEG32_Msk (0x1U << LCD_SEGCTRL1_SEG32_Pos) /*!< 0x00000001 */ -#define LCD_SEGCTRL1_SEG32 LCD_SEGCTRL1_SEG32_Msk /*!< SEG 32��s enable control */ +#define LCD_SEGCTRL1_SEG32 LCD_SEGCTRL1_SEG32_Msk /*!< SEG 32's enable control */ #define LCD_SEGCTRL1_SEG33_Pos (1U) #define LCD_SEGCTRL1_SEG33_Msk (0x1U << LCD_SEGCTRL1_SEG33_Pos) /*!< 0x00000002 */ -#define LCD_SEGCTRL1_SEG33 LCD_SEGCTRL1_SEG33_Msk /*!< SEG 33��s enable control */ +#define LCD_SEGCTRL1_SEG33 LCD_SEGCTRL1_SEG33_Msk /*!< SEG 33's enable control */ #define LCD_SEGCTRL1_SEG34_Pos (2U) #define LCD_SEGCTRL1_SEG34_Msk (0x1U << LCD_SEGCTRL1_SEG34_Pos) /*!< 0x00000004 */ -#define LCD_SEGCTRL1_SEG34 LCD_SEGCTRL1_SEG34_Msk /*!< SEG 34��s enable control */ +#define LCD_SEGCTRL1_SEG34 LCD_SEGCTRL1_SEG34_Msk /*!< SEG 34's enable control */ #define LCD_SEGCTRL1_SEG35_Pos (3U) #define LCD_SEGCTRL1_SEG35_Msk (0x1U << LCD_SEGCTRL1_SEG35_Pos) /*!< 0x00000008 */ -#define LCD_SEGCTRL1_SEG35 LCD_SEGCTRL1_SEG35_Msk /*!< SEG 35��s enable control */ +#define LCD_SEGCTRL1_SEG35 LCD_SEGCTRL1_SEG35_Msk /*!< SEG 35's enable control */ #define LCD_SEGCTRL1_SEG36_Pos (4U) #define LCD_SEGCTRL1_SEG36_Msk (0x1U << LCD_SEGCTRL1_SEG36_Pos) /*!< 0x00000010 */ -#define LCD_SEGCTRL1_SEG36 LCD_SEGCTRL1_SEG36_Msk /*!< SEG 36��s enable control */ +#define LCD_SEGCTRL1_SEG36 LCD_SEGCTRL1_SEG36_Msk /*!< SEG 36's enable control */ #define LCD_SEGCTRL1_SEG37_Pos (5U) #define LCD_SEGCTRL1_SEG37_Msk (0x1U << LCD_SEGCTRL1_SEG37_Pos) /*!< 0x00000020 */ -#define LCD_SEGCTRL1_SEG37 LCD_SEGCTRL1_SEG37_Msk /*!< SEG 37��s enable control */ +#define LCD_SEGCTRL1_SEG37 LCD_SEGCTRL1_SEG37_Msk /*!< SEG 37's enable control */ #define LCD_SEGCTRL1_SEG38_Pos (6U) #define LCD_SEGCTRL1_SEG38_Msk (0x1U << LCD_SEGCTRL1_SEG38_Pos) /*!< 0x00000040 */ -#define LCD_SEGCTRL1_SEG38 LCD_SEGCTRL1_SEG38_Msk /*!< SEG 38��s enable control */ +#define LCD_SEGCTRL1_SEG38 LCD_SEGCTRL1_SEG38_Msk /*!< SEG 38's enable control */ #define LCD_SEGCTRL1_SEG39_Pos (7U) #define LCD_SEGCTRL1_SEG39_Msk (0x1U << LCD_SEGCTRL1_SEG39_Pos) /*!< 0x00000080 */ -#define LCD_SEGCTRL1_SEG39 LCD_SEGCTRL1_SEG39_Msk /*!< SEG 39��s enable control */ +#define LCD_SEGCTRL1_SEG39 LCD_SEGCTRL1_SEG39_Msk /*!< SEG 39's enable control */ #define LCD_SEGCTRL1_SEG40_Pos (8U) #define LCD_SEGCTRL1_SEG40_Msk (0x1U << LCD_SEGCTRL1_SEG40_Pos) /*!< 0x00000100 */ -#define LCD_SEGCTRL1_SEG40 LCD_SEGCTRL1_SEG40_Msk /*!< SEG 40��s enable control */ +#define LCD_SEGCTRL1_SEG40 LCD_SEGCTRL1_SEG40_Msk /*!< SEG 40's enable control */ #define LCD_SEGCTRL1_SEG41_Pos (9U) #define LCD_SEGCTRL1_SEG41_Msk (0x1U << LCD_SEGCTRL1_SEG41_Pos) /*!< 0x00000200 */ -#define LCD_SEGCTRL1_SEG41 LCD_SEGCTRL1_SEG41_Msk /*!< SEG 41��s enable control */ +#define LCD_SEGCTRL1_SEG41 LCD_SEGCTRL1_SEG41_Msk /*!< SEG 41's enable control */ #define LCD_SEGCTRL1_SEG42_Pos (10U) #define LCD_SEGCTRL1_SEG42_Msk (0x1U << LCD_SEGCTRL1_SEG42_Pos) /*!< 0x00000400 */ -#define LCD_SEGCTRL1_SEG42 LCD_SEGCTRL1_SEG42_Msk /*!< SEG 42��s enable control */ +#define LCD_SEGCTRL1_SEG42 LCD_SEGCTRL1_SEG42_Msk /*!< SEG 42's enable control */ #define LCD_SEGCTRL1_SEG43_Pos (11U) #define LCD_SEGCTRL1_SEG43_Msk (0x1U << LCD_SEGCTRL1_SEG43_Pos) /*!< 0x00000800 */ -#define LCD_SEGCTRL1_SEG43 LCD_SEGCTRL1_SEG43_Msk /*!< SEG 43��s enable control */ +#define LCD_SEGCTRL1_SEG43 LCD_SEGCTRL1_SEG43_Msk /*!< SEG 43's enable control */ #define LCD_SEGCTRL1_SEG44_Pos (12U) #define LCD_SEGCTRL1_SEG44_Msk (0x1U << LCD_SEGCTRL1_SEG44_Pos) /*!< 0x00001000 */ -#define LCD_SEGCTRL1_SEG44 LCD_SEGCTRL1_SEG44_Msk /*!< SEG 44��s enable control */ +#define LCD_SEGCTRL1_SEG44 LCD_SEGCTRL1_SEG44_Msk /*!< SEG 44's enable control */ #define LCD_SEGCTRL1_SEG45_Pos (13U) #define LCD_SEGCTRL1_SEG45_Msk (0x1U << LCD_SEGCTRL1_SEG45_Pos) /*!< 0x00002000 */ -#define LCD_SEGCTRL1_SEG45 LCD_SEGCTRL1_SEG45_Msk /*!< SEG 45��s enable control */ +#define LCD_SEGCTRL1_SEG45 LCD_SEGCTRL1_SEG45_Msk /*!< SEG 45's enable control */ #define LCD_SEGCTRL1_SEG46_Pos (14U) #define LCD_SEGCTRL1_SEG46_Msk (0x1U << LCD_SEGCTRL1_SEG46_Pos) /*!< 0x00004000 */ -#define LCD_SEGCTRL1_SEG46 LCD_SEGCTRL1_SEG46_Msk /*!< SEG 46��s enable control */ +#define LCD_SEGCTRL1_SEG46 LCD_SEGCTRL1_SEG46_Msk /*!< SEG 46's enable control */ #define LCD_SEGCTRL1_SEG47_Pos (15U) #define LCD_SEGCTRL1_SEG47_Msk (0x1U << LCD_SEGCTRL1_SEG47_Pos) /*!< 0x00008000 */ -#define LCD_SEGCTRL1_SEG47 LCD_SEGCTRL1_SEG47_Msk /*!< SEG 47��s enable control */ +#define LCD_SEGCTRL1_SEG47 LCD_SEGCTRL1_SEG47_Msk /*!< SEG 47's enable control */ #define LCD_SEGCTRL1_SEG48_Pos (16U) #define LCD_SEGCTRL1_SEG48_Msk (0x1U << LCD_SEGCTRL1_SEG48_Pos) /*!< 0x00010000 */ -#define LCD_SEGCTRL1_SEG48 LCD_SEGCTRL1_SEG48_Msk /*!< SEG 48��s enable control */ +#define LCD_SEGCTRL1_SEG48 LCD_SEGCTRL1_SEG48_Msk /*!< SEG 48's enable control */ #define LCD_SEGCTRL1_SEG49_Pos (17U) #define LCD_SEGCTRL1_SEG49_Msk (0x1U << LCD_SEGCTRL1_SEG49_Pos) /*!< 0x00020000 */ -#define LCD_SEGCTRL1_SEG49 LCD_SEGCTRL1_SEG49_Msk /*!< SEG 49��s enable control */ +#define LCD_SEGCTRL1_SEG49 LCD_SEGCTRL1_SEG49_Msk /*!< SEG 49's enable control */ #define LCD_SEGCTRL1_SEG50_Pos (18U) #define LCD_SEGCTRL1_SEG50_Msk (0x1U << LCD_SEGCTRL1_SEG50_Pos) /*!< 0x00040000 */ -#define LCD_SEGCTRL1_SEG50 LCD_SEGCTRL1_SEG50_Msk /*!< SEG 50��s enable control */ +#define LCD_SEGCTRL1_SEG50 LCD_SEGCTRL1_SEG50_Msk /*!< SEG 50's enable control */ #define LCD_SEGCTRL1_SEG51_Pos (19U) #define LCD_SEGCTRL1_SEG51_Msk (0x1U << LCD_SEGCTRL1_SEG51_Pos) /*!< 0x00080000 */ -#define LCD_SEGCTRL1_SEG51 LCD_SEGCTRL1_SEG51_Msk /*!< SEG 51��s enable control */ +#define LCD_SEGCTRL1_SEG51 LCD_SEGCTRL1_SEG51_Msk /*!< SEG 51's enable control */ #define LCD_SEGCTRL1_SEG52_Pos (20U) #define LCD_SEGCTRL1_SEG52_Msk (0x1U << LCD_SEGCTRL1_SEG52_Pos) /*!< 0x00100000 */ -#define LCD_SEGCTRL1_SEG52 LCD_SEGCTRL1_SEG52_Msk /*!< SEG 52��s enable control */ +#define LCD_SEGCTRL1_SEG52 LCD_SEGCTRL1_SEG52_Msk /*!< SEG 52's enable control */ #define LCD_SEGCTRL1_SEG53_Pos (21U) #define LCD_SEGCTRL1_SEG53_Msk (0x1U << LCD_SEGCTRL1_SEG53_Pos) /*!< 0x00200000 */ -#define LCD_SEGCTRL1_SEG53 LCD_SEGCTRL1_SEG53_Msk /*!< SEG 53��s enable control */ +#define LCD_SEGCTRL1_SEG53 LCD_SEGCTRL1_SEG53_Msk /*!< SEG 53's enable control */ #define LCD_SEGCTRL1_SEG54_Pos (22U) #define LCD_SEGCTRL1_SEG54_Msk (0x1U << LCD_SEGCTRL1_SEG54_Pos) /*!< 0x00400000 */ -#define LCD_SEGCTRL1_SEG54 LCD_SEGCTRL1_SEG54_Msk /*!< SEG 54��s enable control */ +#define LCD_SEGCTRL1_SEG54 LCD_SEGCTRL1_SEG54_Msk /*!< SEG 54's enable control */ #define LCD_SEGCTRL1_SEG55_Pos (23U) #define LCD_SEGCTRL1_SEG55_Msk (0x1U << LCD_SEGCTRL1_SEG55_Pos) /*!< 0x00800000 */ -#define LCD_SEGCTRL1_SEG55 LCD_SEGCTRL1_SEG55_Msk /*!< SEG 55��s enable control */ +#define LCD_SEGCTRL1_SEG55 LCD_SEGCTRL1_SEG55_Msk /*!< SEG 55's enable control */ #define LCD_SEGCTRL1_SEG56_Pos (24U) #define LCD_SEGCTRL1_SEG56_Msk (0x1U << LCD_SEGCTRL1_SEG56_Pos) /*!< 0x01000000 */ -#define LCD_SEGCTRL1_SEG56 LCD_SEGCTRL1_SEG56_Msk /*!< SEG 56��s enable control */ +#define LCD_SEGCTRL1_SEG56 LCD_SEGCTRL1_SEG56_Msk /*!< SEG 56's enable control */ #define LCD_SEGCTRL1_SEG57_Pos (25U) #define LCD_SEGCTRL1_SEG57_Msk (0x1U << LCD_SEGCTRL1_SEG57_Pos) /*!< 0x02000000 */ -#define LCD_SEGCTRL1_SEG57 LCD_SEGCTRL1_SEG57_Msk /*!< SEG 57��s enable control */ +#define LCD_SEGCTRL1_SEG57 LCD_SEGCTRL1_SEG57_Msk /*!< SEG 57's enable control */ #define LCD_SEGCTRL1_SEG58_Pos (26U) #define LCD_SEGCTRL1_SEG58_Msk (0x1U << LCD_SEGCTRL1_SEG58_Pos) /*!< 0x04000000 */ -#define LCD_SEGCTRL1_SEG58 LCD_SEGCTRL1_SEG58_Msk /*!< SEG 58��s enable control */ +#define LCD_SEGCTRL1_SEG58 LCD_SEGCTRL1_SEG58_Msk /*!< SEG 58's enable control */ #define LCD_SEGCTRL1_SEG59_Pos (27U) #define LCD_SEGCTRL1_SEG59_Msk (0x1U << LCD_SEGCTRL1_SEG59_Pos) /*!< 0x08000000 */ -#define LCD_SEGCTRL1_SEG59 LCD_SEGCTRL1_SEG59_Msk /*!< SEG 59��s enable control */ +#define LCD_SEGCTRL1_SEG59 LCD_SEGCTRL1_SEG59_Msk /*!< SEG 59's enable control */ #define LCD_SEGCTRL1_SEG60_Pos (28U) #define LCD_SEGCTRL1_SEG60_Msk (0x1U << LCD_SEGCTRL1_SEG60_Pos) /*!< 0x10000000 */ -#define LCD_SEGCTRL1_SEG60 LCD_SEGCTRL1_SEG60_Msk /*!< SEG 60��s enable control */ +#define LCD_SEGCTRL1_SEG60 LCD_SEGCTRL1_SEG60_Msk /*!< SEG 60's enable control */ #define LCD_SEGCTRL1_SEG61_Pos (29U) #define LCD_SEGCTRL1_SEG61_Msk (0x1U << LCD_SEGCTRL1_SEG61_Pos) /*!< 0x20000000 */ -#define LCD_SEGCTRL1_SEG61 LCD_SEGCTRL1_SEG61_Msk /*!< SEG 61��s enable control */ +#define LCD_SEGCTRL1_SEG61 LCD_SEGCTRL1_SEG61_Msk /*!< SEG 61's enable control */ #define LCD_SEGCTRL1_SEG62_Pos (30U) #define LCD_SEGCTRL1_SEG62_Msk (0x1U << LCD_SEGCTRL1_SEG62_Pos) /*!< 0x40000000 */ -#define LCD_SEGCTRL1_SEG62 LCD_SEGCTRL1_SEG62_Msk /*!< SEG 62��s enable control */ +#define LCD_SEGCTRL1_SEG62 LCD_SEGCTRL1_SEG62_Msk /*!< SEG 62's enable control */ #define LCD_SEGCTRL1_SEG63_Pos (31U) #define LCD_SEGCTRL1_SEG63_Msk (0x1U << LCD_SEGCTRL1_SEG63_Pos) /*!< 0x80000000 */ -#define LCD_SEGCTRL1_SEG63 LCD_SEGCTRL1_SEG63_Msk /*!< SEG 63��s enable control */ +#define LCD_SEGCTRL1_SEG63 LCD_SEGCTRL1_SEG63_Msk /*!< SEG 63's enable control */ /************** Bits definition for LCD_SEGCTRL2 register ******************/ #define LCD_SEGCTRL2_SEG64_Pos (0U) #define LCD_SEGCTRL2_SEG64_Msk (0x1U << LCD_SEGCTRL2_SEG64_Pos) /*!< 0x00000001 */ -#define LCD_SEGCTRL2_SEG64 LCD_SEGCTRL2_SEG64_Msk /*!< SEG 64��s enable control */ +#define LCD_SEGCTRL2_SEG64 LCD_SEGCTRL2_SEG64_Msk /*!< SEG 64's enable control */ #define LCD_SEGCTRL2_SEG65_Pos (1U) #define LCD_SEGCTRL2_SEG65_Msk (0x1U << LCD_SEGCTRL2_SEG65_Pos) /*!< 0x00000002 */ -#define LCD_SEGCTRL2_SEG65 LCD_SEGCTRL2_SEG65_Msk /*!< SEG 65��s enable control */ +#define LCD_SEGCTRL2_SEG65 LCD_SEGCTRL2_SEG65_Msk /*!< SEG 65's enable control */ #define LCD_SEGCTRL2_SEG66_Pos (2U) #define LCD_SEGCTRL2_SEG66_Msk (0x1U << LCD_SEGCTRL2_SEG66_Pos) /*!< 0x00000004 */ -#define LCD_SEGCTRL2_SEG66 LCD_SEGCTRL2_SEG66_Msk /*!< SEG 66��s enable control */ +#define LCD_SEGCTRL2_SEG66 LCD_SEGCTRL2_SEG66_Msk /*!< SEG 66's enable control */ #define LCD_SEGCTRL2_SEG67_Pos (3U) #define LCD_SEGCTRL2_SEG67_Msk (0x1U << LCD_SEGCTRL2_SEG67_Pos) /*!< 0x00000008 */ -#define LCD_SEGCTRL2_SEG67 LCD_SEGCTRL2_SEG67_Msk /*!< SEG 67��s enable control */ +#define LCD_SEGCTRL2_SEG67 LCD_SEGCTRL2_SEG67_Msk /*!< SEG 67's enable control */ #define LCD_SEGCTRL2_SEG68_Pos (4U) #define LCD_SEGCTRL2_SEG68_Msk (0x1U << LCD_SEGCTRL2_SEG68_Pos) /*!< 0x00000010 */ -#define LCD_SEGCTRL2_SEG68 LCD_SEGCTRL2_SEG68_Msk /*!< SEG 68��s enable control */ +#define LCD_SEGCTRL2_SEG68 LCD_SEGCTRL2_SEG68_Msk /*!< SEG 68's enable control */ #define LCD_SEGCTRL2_SEG69_Pos (5U) #define LCD_SEGCTRL2_SEG69_Msk (0x1U << LCD_SEGCTRL2_SEG69_Pos) /*!< 0x00000020 */ -#define LCD_SEGCTRL2_SEG69 LCD_SEGCTRL2_SEG69_Msk /*!< SEG 69��s enable control */ +#define LCD_SEGCTRL2_SEG69 LCD_SEGCTRL2_SEG69_Msk /*!< SEG 69's enable control */ #define LCD_SEGCTRL2_SEG70_Pos (6U) #define LCD_SEGCTRL2_SEG70_Msk (0x1U << LCD_SEGCTRL2_SEG70_Pos) /*!< 0x00000040 */ -#define LCD_SEGCTRL2_SEG70 LCD_SEGCTRL2_SEG70_Msk /*!< SEG 70��s enable control */ +#define LCD_SEGCTRL2_SEG70 LCD_SEGCTRL2_SEG70_Msk /*!< SEG 70's enable control */ #define LCD_SEGCTRL2_SEG71_Pos (7U) #define LCD_SEGCTRL2_SEG71_Msk (0x1U << LCD_SEGCTRL2_SEG71_Pos) /*!< 0x00000080 */ -#define LCD_SEGCTRL2_SEG71 LCD_SEGCTRL2_SEG71_Msk /*!< SEG 71��s enable control */ +#define LCD_SEGCTRL2_SEG71 LCD_SEGCTRL2_SEG71_Msk /*!< SEG 71's enable control */ #define LCD_SEGCTRL2_SEG72_Pos (8U) #define LCD_SEGCTRL2_SEG72_Msk (0x1U << LCD_SEGCTRL2_SEG72_Pos) /*!< 0x00000100 */ -#define LCD_SEGCTRL2_SEG72 LCD_SEGCTRL2_SEG72_Msk /*!< SEG 72��s enable control */ +#define LCD_SEGCTRL2_SEG72 LCD_SEGCTRL2_SEG72_Msk /*!< SEG 72's enable control */ #define LCD_SEGCTRL2_SEG73_Pos (9U) #define LCD_SEGCTRL2_SEG73_Msk (0x1U << LCD_SEGCTRL2_SEG73_Pos) /*!< 0x00000200 */ -#define LCD_SEGCTRL2_SEG73 LCD_SEGCTRL2_SEG73_Msk /*!< SEG 73��s enable control */ +#define LCD_SEGCTRL2_SEG73 LCD_SEGCTRL2_SEG73_Msk /*!< SEG 73's enable control */ #define LCD_SEGCTRL2_SEG74_Pos (10U) #define LCD_SEGCTRL2_SEG74_Msk (0x1U << LCD_SEGCTRL2_SEG74_Pos) /*!< 0x00000400 */ -#define LCD_SEGCTRL2_SEG74 LCD_SEGCTRL2_SEG74_Msk /*!< SEG 74��s enable control */ +#define LCD_SEGCTRL2_SEG74 LCD_SEGCTRL2_SEG74_Msk /*!< SEG 74's enable control */ #define LCD_SEGCTRL2_SEG75_Pos (11U) #define LCD_SEGCTRL2_SEG75_Msk (0x1U << LCD_SEGCTRL2_SEG75_Pos) /*!< 0x00000800 */ -#define LCD_SEGCTRL2_SEG75 LCD_SEGCTRL2_SEG75_Msk /*!< SEG 75��s enable control */ +#define LCD_SEGCTRL2_SEG75 LCD_SEGCTRL2_SEG75_Msk /*!< SEG 75's enable control */ #define LCD_SEGCTRL2_SEG76_Pos (12U) #define LCD_SEGCTRL2_SEG76_Msk (0x1U << LCD_SEGCTRL2_SEG76_Pos) /*!< 0x00001000 */ -#define LCD_SEGCTRL2_SEG76 LCD_SEGCTRL2_SEG76_Msk /*!< SEG 76��s enable control */ +#define LCD_SEGCTRL2_SEG76 LCD_SEGCTRL2_SEG76_Msk /*!< SEG 76's enable control */ #define LCD_SEGCTRL2_SEG77_Pos (13U) #define LCD_SEGCTRL2_SEG77_Msk (0x1U << LCD_SEGCTRL2_SEG77_Pos) /*!< 0x00002000 */ -#define LCD_SEGCTRL2_SEG77 LCD_SEGCTRL2_SEG77_Msk /*!< SEG 77��s enable control */ +#define LCD_SEGCTRL2_SEG77 LCD_SEGCTRL2_SEG77_Msk /*!< SEG 77's enable control */ #define LCD_SEGCTRL2_SEG78_Pos (14U) #define LCD_SEGCTRL2_SEG78_Msk (0x1U << LCD_SEGCTRL2_SEG78_Pos) /*!< 0x00004000 */ -#define LCD_SEGCTRL2_SEG78 LCD_SEGCTRL2_SEG78_Msk /*!< SEG 78��s enable control */ +#define LCD_SEGCTRL2_SEG78 LCD_SEGCTRL2_SEG78_Msk /*!< SEG 78's enable control */ #define LCD_SEGCTRL2_SEG79_Pos (15U) #define LCD_SEGCTRL2_SEG79_Msk (0x1U << LCD_SEGCTRL2_SEG79_Pos) /*!< 0x00008000 */ -#define LCD_SEGCTRL2_SEG79 LCD_SEGCTRL2_SEG79_Msk /*!< SEG 79��s enable control */ +#define LCD_SEGCTRL2_SEG79 LCD_SEGCTRL2_SEG79_Msk /*!< SEG 79's enable control */ /******************************************************************************/ /* */ diff --git a/bsp/acm32/acm32f0x0-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c b/bsp/acm32/acm32f0x0-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c index 2a0083002d637fb8edc932f93515b5b9e34b0731..d316a8806e909b2eae351ed35a028fffe87ee0cb 100644 --- a/bsp/acm32/acm32f0x0-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c +++ b/bsp/acm32/acm32f0x0-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c @@ -17,7 +17,7 @@ * Description : Handle EXTI interrupt request. * Input : huart: EXTI handle. * Output : -* Author : Chris_Kyle Data : 2020�� +* Author : Chris_Kyle Data : 2020年 **********************************************************************************/ void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) { diff --git a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_FAU.h b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_FAU.h index 617035702c5b6a1defb8626cabae320e3c25b2c7..265a370eb53983ce5b86de77c8e9d0ffeee86732 100644 --- a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_FAU.h +++ b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_FAU.h @@ -8,7 +8,7 @@ /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 1 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -17,7 +17,7 @@ void HAL_CORDIC_CosSin_1(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 2 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -26,7 +26,7 @@ void HAL_CORDIC_CosSin_2(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 3 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -35,7 +35,7 @@ void HAL_CORDIC_CosSin_3(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 4 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -44,7 +44,7 @@ void HAL_CORDIC_CosSin_4(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 5 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -53,7 +53,7 @@ void HAL_CORDIC_CosSin_5(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 6 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -62,7 +62,7 @@ void HAL_CORDIC_CosSin_6(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 7 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None @@ -71,7 +71,7 @@ void HAL_CORDIC_CosSin_7(int angle_para, int* cos_data, int* sin_data); /************************************************************************** * Function Name : HAL_CORDIC_CosSin( precision 8 ) * Description : calculate the sin & cos value of the input angle -* Input : - angle_para : input angle data in radians, divided by [range[-1,1],Q31 format]; +* Input : - angle_para : input angle data in radians, divided by [[[range[-1,1],Q31 format]; * Output : - * cos_data : the cos value of the input angle[range[-1,1],Q31 format] - * sin_data : the sin value of the input angle[range[-1,1],Q31 format] * Return : None diff --git a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_RTC.h b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_RTC.h index 8cc7f50a2b322c833dca5d5204367143fc12d011..0ff1ec6c2f35a794964cf1776dc853e7b915dc56 100644 --- a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_RTC.h +++ b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_RTC.h @@ -21,7 +21,7 @@ #define RTC_IE_STP2FIE (BIT15) #define RTC_IE_STP1RIE (BIT14) #define RTC_IE_STP1FIE (BIT13) -#define RTC_IE_ADJ32 (BIT12) +#define RTC_IE_ADJ32 (BIT12) #define RTC_IE_ALM (BIT11) #define RTC_IE_1KHZ (BIT10) #define RTC_IE_256HZ (BIT9) @@ -40,7 +40,7 @@ #define RTC_SR_STP2FIE (BIT15) #define RTC_SR_STP1RIE (BIT14) #define RTC_SR_STP1FIE (BIT13) -#define RTC_SR_ADJ32 (BIT12) +#define RTC_SR_ADJ32 (BIT12) #define RTC_SR_ALM (BIT11) #define RTC_SR_1KHZ (BIT10) #define RTC_SR_256HZ (BIT9) @@ -311,11 +311,11 @@ typedef enum { RTC_WAKEUP_RTC_INT = 0, RTC_WAKEUP_WKUP1 = 0x00010000, // PA0 - RTC_WAKEUP_WKUP2 = 0x00020000, // PC13 - RTC_WAKEUP_WKUP3 = 0x00040000, // PA2 - RTC_WAKEUP_WKUP4 = 0x00080000, // PC5 - RTC_WAKEUP_WKUP5 = 0x00100000, // PB5 - RTC_WAKEUP_WKUP6 = 0x00200000, // PB15 + RTC_WAKEUP_WKUP2 = 0x00020000, // PC13 + RTC_WAKEUP_WKUP3 = 0x00040000, // PA2 + RTC_WAKEUP_WKUP4 = 0x00080000, // PC5 + RTC_WAKEUP_WKUP5 = 0x00100000, // PB5 + RTC_WAKEUP_WKUP6 = 0x00200000, // PB15 RTC_WAKEUP_STAMP2 = (RTC_IE_STP2RIE | RTC_IE_STP2FIE), RTC_WAKEUP_STAMP1 = (RTC_IE_STP1RIE | RTC_IE_STP1FIE), RTC_WAKEUP_32S = RTC_IE_ADJ32, @@ -324,10 +324,10 @@ typedef enum RTC_WAKEUP_MIN = RTC_IE_MIN, RTC_WAKEUP_HOUR = RTC_IE_HOUR, RTC_WAKEUP_DATE = RTC_IE_DATE, -}enum_WKUP_t; +}enum_WKUP_t; -#define STANDBY_WAKEUP_RISING 0 -#define STANDBY_WAKEUP_FALLING 1 +#define STANDBY_WAKEUP_RISING 0 +#define STANDBY_WAKEUP_FALLING 1 /** * @} @@ -355,13 +355,13 @@ typedef enum */ typedef struct { - uint32_t u32_ClockSource; /*!< The RTC Clock Source to be configured. + uint32_t u32_ClockSource; /*!< The RTC Clock Source to be configured. This parameter can be a value of @ref ClockSource */ - uint32_t u32_Compensation; /*!< The RTC Clock Compensation to be configured. + uint32_t u32_Compensation; /*!< The RTC Clock Compensation to be configured. This parameter can be a value of @ref Clock_Compensation */ - uint32_t u32_CompensationValue; /*!< The RTC Clock Compensation Value to be configured. + uint32_t u32_CompensationValue; /*!< The RTC Clock Compensation Value to be configured. This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x1FF */ }RTC_ConfigTypeDef; @@ -383,7 +383,7 @@ typedef struct uint8_t u8_WeekDay; /*!< Specifies the RTC Date WeekDay. This parameter can be a value of @ref RTC_WeekDay_Definitions */ }RTC_DateTypeDef; -/* Attention: YearMonthDateWeek use BCD code */ +/* Attention: Year、Month、Date、Week use BCD code */ /** @@ -400,7 +400,7 @@ typedef struct uint8_t u8_Seconds; /*!< Specifies the RTC Time Seconds. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x59 */ }RTC_TimeTypeDef; -/* Attention: HourMinuteSecond use BCD code */ +/* Attention: Hour、Minute、Second use BCD code */ /** @@ -414,21 +414,21 @@ typedef struct uint32_t u32_AlarmInterrupt; /*!< Specifies the RTC alarm interrupt Enable or Disable. This parameter can be a value of @ref RTC_AlarmInterrupt */ - uint32_t u32_DayMask; /*!< Specifies the RTC alarm Day/Week Mask. + uint32_t u32_DayMask; /*!< Specifies the RTC alarm Day/Week Mask. This parameter can be a value of @ref RTC_DayMask */ - - uint32_t u32_HourMask; /*!< Specifies the RTC alarm Hour Mask. + + uint32_t u32_HourMask; /*!< Specifies the RTC alarm Hour Mask. This parameter can be a value of @ref RTC_HourMask */ - - uint32_t u32_MinMask; /*!< Specifies the RTC alarm Min Mask. + + uint32_t u32_MinMask; /*!< Specifies the RTC alarm Min Mask. This parameter can be a value of @ref RTC_MinMask */ - + uint32_t u32_AlarmWeek; /*!< Specifies the RTC alarm week select(Select WeekMode this parameter is valid). This parameter can be a value of @ref RTC_Alarm_WeekSelect */ - + uint32_t u32_AlarmDay; /*!< Specifies the RTC alarm day select(Select DayMode this parameter is valid). This parameter must be a number between Min_Data = 0x01 and Max_Data = 0x31 */ - + uint32_t u32_Hours; /*!< Specifies the RTC alarm Hour. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x23 */ @@ -443,7 +443,7 @@ typedef struct /** * @brief RTC Temper structure definition */ -typedef struct +typedef struct { uint32_t u32_TemperEdge; /*!< Specifies the RTC Temper edge select. This parameter can be a value of @ref RTC_Temper_edge */ @@ -459,43 +459,43 @@ typedef struct }RTC_TemperTypeDef; -/** @brief PC13 function select +/** @brief PC13 function select * @param __FUNC__: PC13 function select. - * This parameter can be 0: GPIO1RTC Fout2RTC tamper 3PC13 Value + * This parameter can be 0: GPIO，1：RTC Fout，2：RTC tamper 3：PC13 Value */ #define __HAL_RTC_PC13_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3)) | (__FUNC__)) -/** @brief PC14 function select +/** @brief PC14 function select * @param __FUNC__: PC14 function select. - * This parameter can be 0: GPIO1PC14 Value + * This parameter can be 0: GPIO，1：PC14 Value */ #define __HAL_RTC_PC14_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3 << 3)) | (__FUNC__ << 3)) -/** @brief PC15 function select +/** @brief PC15 function select * @param __FUNC__: PC15 function select. - * This parameter can be 0: GPIO1PC15 Value + * This parameter can be 0: GPIO，1：PC15 Value */ #define __HAL_RTC_PC15_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3 << 5)) | (__FUNC__ << 5)) -/** @brief PC13 Value set +/** @brief PC13 Value set * @param __FUNC__: PC13 Value set. - * This parameter can be 0: set1claer + * This parameter can be 0: set，1：claer */ #define __HAL_RTC_PC13_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 8)) | (__VALUE__ << 8)) -/** @brief PC14 Value set +/** @brief PC14 Value set * @param __FUNC__: PC14 Value set. - * This parameter can be 0: set1claer + * This parameter can be 0: set，1：claer */ #define __HAL_RTC_PC14_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 9)) | (__VALUE__ << 9)) -/** @brief PC15 Value set +/** @brief PC15 Value set * @param __FUNC__: PC15 Value set. - * This parameter can be 0: set1claer + * This parameter can be 0: set，1：claer */ #define __HAL_RTC_PC15_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 10)) | (__VALUE__ << 10)) -/* @brief PC13PC14PC15 pull up or pull down */ +/* @brief PC13、PC14、PC15 pull up or pull down */ #define __HAL_RTC_PC13_PULL_UP_ENABLE() (PMU->IOCR |= BIT0) #define __HAL_RTC_PC13_PULL_UP_DISABLE() (PMU->IOCR &= ~BIT0) #define __HAL_RTC_PC13_PULL_DOWN_ENABLE() (PMU->IOCR |= BIT1) @@ -511,7 +511,7 @@ typedef struct #define __HAL_RTC_PC15_PULL_DOWN_ENABLE() (PMU->IOCR |= BIT17) #define __HAL_RTC_PC15_PULL_DOWN_DISABLE() (PMU->IOCR &= ~BIT17) -/* @brief PC13PC14PC15 digit or analog */ +/* @brief PC13、PC14、PC15 digit or analog */ #define __HAL_RTC_PC13_ANALOG() (PMU->IOCR |= BIT6) #define __HAL_RTC_PC13_DIGIT() (PMU->IOCR &= ~BIT6) @@ -571,7 +571,7 @@ typedef struct #define IS_RTC_ALARM_DAY_MASK(__MASKD__) (((__MASKD__) == RTC_ALARM_DAY_MASK_ENABLE) || \ ((__MASKD__) == RTC_ALARM_DAY_MASK_DISABLE)) - + #define IS_RTC_ALARM_HOUR_MASK(__MASKH__) (((__MASKH__) == RTC_ALARM_HOUR_MASK_ENABLE) || \ ((__MASKH__) == RTC_ALARM_HOUR_MASK_DISABLE)) @@ -607,35 +607,35 @@ typedef struct * @} */ -/* RTC stamp1 interrupt enabledisable */ +/* RTC stamp1 interrupt enable、disable */ #define __HAL_RTC_ENABLE_STAMP1_IT (RTC->IE |= (RTC_IE_STP1RIE | RTC_IE_STP1FIE)) #define __HAL_RTC_DISABLE_STAMP1_IT (RTC->IE &= ~(RTC_IE_STP1RIE | RTC_IE_STP1FIE)) -/* RTC stamp2 interrupt enabledisable */ +/* RTC stamp2 interrupt enable、disable */ #define __HAL_RTC_ENABLE_STAMP2_IT (RTC->IE |= (RTC_IE_STP2RIE | RTC_IE_STP2FIE)) #define __HAL_RTC_DISABLE_STAMP2_IT (RTC->IE &= ~(RTC_IE_STP2RIE | RTC_IE_STP2FIE)) -/* RTC 32S interrupt enabledisable */ +/* RTC 32S interrupt enable、disable */ #define __HAL_RTC_ENABLE_32S_IT (RTC->IE |= RTC_IE_ADJ32) #define __HAL_RTC_DISABLE_32S_IT (RTC->IE &= ~RTC_IE_ADJ32) -/* RTC alarm interrupt enabledisable */ +/* RTC alarm interrupt enable、disable */ #define __HAL_RTC_ENABLE_ALM_IT (RTC->IE |= RTC_IE_ALM) #define __HAL_RTC_DISABLE_ALM_IT (RTC->IE &= RTC_IE_ALM) -/* RTC sec interrupt enabledisable */ +/* RTC sec interrupt enable、disable */ #define __HAL_RTC_ENABLE_SEC_IT (RTC->IE |= RTC_IE_SEC) #define __HAL_RTC_DISABLE_SEC_IT (RTC->IE &= ~RTC_IE_SEC) -/* RTC Minutes interrupt enabledisable */ +/* RTC Minutes interrupt enable、disable */ #define __HAL_RTC_ENABLE_MIN_IT (RTC->IE |= RTC_IE_MIN) #define __HAL_RTC_DISABLE_MIN_IT (RTC->IE &= ~RTC_IE_MIN) -/* RTC Hour interrupt enabledisable */ +/* RTC Hour interrupt enable、disable */ #define __HAL_RTC_ENABLE_HOUR_IT (RTC->IE |= RTC_IE_HOUR) #define __HAL_RTC_DISABLE_HOUR_IT (RTC->IE &= ~RTC_IE_HOUR) -/* RTC Date interrupt enabledisable */ +/* RTC Date interrupt enable、disable */ #define __HAL_RTC_ENABLE_DATE_IT (RTC->IE |= RTC_IE_DATE) #define __HAL_RTC_DISABLE_DATE_IT (RTC->IE &= ~RTC_IE_DATE) diff --git a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_UART.h b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_UART.h index 0c662da6d93a086e1b2f41530b7690a7ad410533..9ec4283bb11f413afe78e8e87340dfb318e7bdc3 100644 --- a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_UART.h +++ b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_UART.h @@ -127,7 +127,7 @@ #define UART_MODE_RX (0x00000200) /*!< RX mode */ #define UART_MODE_TX (0x00000100) /*!< TX mode */ #define UART_MODE_TX_RX (0x00000300) /*!< RX and TX mode */ -#define UART_MODE_TX_RX_DEBUG (0x10000300) /*!< RXTX mode and Debug use this uart */ +#define UART_MODE_TX_RX_DEBUG (0x10000300) /*!< RX、TX mode and Debug use this uart */ #define UART_MODE_HALF_DUPLEX (0x20000300) /*!< Single half duplex */ /** * @} diff --git a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c index ff2ab720cf204313b4d69c5e42892d7cf392824a..3cf776b8da68ec993badecd8dda2254c3c9793ac 100644 --- a/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c +++ b/bsp/acm32/acm32f4xx-nucleo/libraries/HAL_Driver/Src/HAL_EXTI.c @@ -17,7 +17,7 @@ * Description : Handle EXTI interrupt request. * Input : huart: EXTI handle. * Output : -* Author : Chris_Kyle Data : 2020�� +* Author : Chris_Kyle Data : 2020年 **********************************************************************************/ void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) { diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/dma/hal_dma.c b/bsp/allwinner/libraries/sunxi-hal/hal/source/dma/hal_dma.c index 1828abb11adbe294e026f91e0784eed52727b5af..111d5389375bea3456e1836ebffc3986c3fec2f7 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/dma/hal_dma.c +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/dma/hal_dma.c @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/gpio/hal_gpio.c b/bsp/allwinner/libraries/sunxi-hal/hal/source/gpio/hal_gpio.c index b54de96cb0450aad5d1de2c5638e173089953466..b17b49c2417582e404b7c4e06213ad10aabeabd4 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/gpio/hal_gpio.c +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/gpio/hal_gpio.c @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/timer/sunxi_timer.h b/bsp/allwinner/libraries/sunxi-hal/hal/source/timer/sunxi_timer.h index 606c6fdd74f67a1d2b9375dfcce7ab9e2aae84cc..3b236ea87387f84f2158ad6150d9708b03d15069 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/timer/sunxi_timer.h +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/timer/sunxi_timer.h @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun20iw1/usb_sun20iw1.h b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun20iw1/usb_sun20iw1.h index d4e8d5f2a182194a9e794d4a2bbba2cfb5d5434a..b0feedb6390902a23c28910c91c3e01141caac98 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun20iw1/usb_sun20iw1.h +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun20iw1/usb_sun20iw1.h @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw18/usb_sun8iw18.h b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw18/usb_sun8iw18.h index 476302605093b161e01f8422299be4f4f5537da0..c641f429d2b200b942cdc55f4a397819f286db86 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw18/usb_sun8iw18.h +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw18/usb_sun8iw18.h @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw19/usb_sun8iw19.h b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw19/usb_sun8iw19.h index 7e8af29d54c4eefb8bf54ecb651fd27e5041d7fa..4a1b911ee3ad4a0a6f6a4a0b4460e7fd58483d24 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw19/usb_sun8iw19.h +++ b/bsp/allwinner/libraries/sunxi-hal/hal/source/usb/platform/sun8iw19/usb_sun8iw19.h @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/hal/test/gpio/test_gpio.c b/bsp/allwinner/libraries/sunxi-hal/hal/test/gpio/test_gpio.c index 52ea6b21c2be4b367b51398ec8bef2ce0ee55f0a..14f328451e90931f067e9c6058d2878197fb91ea 100644 --- a/bsp/allwinner/libraries/sunxi-hal/hal/test/gpio/test_gpio.c +++ b/bsp/allwinner/libraries/sunxi-hal/hal/test/gpio/test_gpio.c @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/allwinner/libraries/sunxi-hal/include/hal/hal_gpio.h b/bsp/allwinner/libraries/sunxi-hal/include/hal/hal_gpio.h index fdce560d3f72bcc0f324468af4ae83a656328b06..4d5cfccdcf3d3a947cf3167b25496507f95b76dd 100644 --- a/bsp/allwinner/libraries/sunxi-hal/include/hal/hal_gpio.h +++ b/bsp/allwinner/libraries/sunxi-hal/include/hal/hal_gpio.h @@ -7,12 +7,12 @@ * * DISCLAIMER * THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT. -* IF YOU NEED TO INTEGRATE THIRD PARTY��S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) +* IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.) * IN ALLWINNERS��SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN * ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES. * ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS * COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE. -* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY��S TECHNOLOGY. +* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY. * * * THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT diff --git a/bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sdl/registers/regsiomuxc.h b/bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sdl/registers/regsiomuxc.h index 9b8bc3c42a01d911ba876dc6570442ebd3baebcc..0e534a7bb4be06045f58e8ffbe7ac49dc724a837 100644 --- a/bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sdl/registers/regsiomuxc.h +++ b/bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sdl/registers/regsiomuxc.h @@ -3199,7 +3199,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Write AXI ID=00 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx -3 lsb’s will be passed as configured + * - 0000 - 0xxx -3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3223,7 +3223,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Write AXI ID=01 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3247,7 +3247,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Write AXI ID=10 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3271,7 +3271,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Write AXI ID=11 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3295,7 +3295,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Read AXI ID=00 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3319,7 +3319,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Read AXI ID=01 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3343,7 +3343,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Read AXI ID=10 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ @@ -3367,7 +3367,7 @@ typedef union _hw_iomuxc_gpr6 * IPU1 Read AXI ID=11 Quality of Service (QoS) priority * * Values: - * - 0000 - 0xxx - 3 lsb’s will be passed as configured + * - 0000 - 0xxx - 3 lsb's will be passed as configured * - 1000 - 1xxx - 1111 */ //@{ diff --git a/bsp/stm32/stm32h743-atk-apollo/board/ports/drv_ov2640.h b/bsp/stm32/stm32h743-atk-apollo/board/ports/drv_ov2640.h index e85e559421444fb142759ccecd90988644a77d98..a00faf0ffa3e84cc3ff058ecf65e7dd2a671cb3a 100644 --- a/bsp/stm32/stm32h743-atk-apollo/board/ports/drv_ov2640.h +++ b/bsp/stm32/stm32h743-atk-apollo/board/ports/drv_ov2640.h @@ -21,7 +21,7 @@ extern "C" { #define OV2640_PID 0X2642 -//褰撻�夋嫨DSP鍦板潃(0XFF=0X00)鏃�,OV2640鐨凞SP瀵勫瓨鍣ㄥ湴鍧�鏄犲皠琛� +//ѡDSPַ(0XFF=0X00)ʱOV2640DSP洢ַļĴַ #define OV2640_DSP_R_BYPASS 0x05 #define OV2640_DSP_Qs 0x44 #define OV2640_DSP_CTRL 0x50 @@ -57,7 +57,7 @@ extern "C" { #define OV2640_DSP_P_STATUS 0xFE #define OV2640_DSP_RA_DLMT 0xFF -//褰撻�夋嫨浼犳劅鍣ㄥ湴鍧�(0XFF=0X01)鏃�,OV2640鐨凞SP瀵勫瓨鍣ㄥ湴鍧�鏄犲皠琛� +//ѡͷĴ(0XFF=0X01)ʱOV2640SP洢ַļĴַ #define OV2640_SENSOR_GAIN 0x00 #define OV2640_SENSOR_COM1 0x03 #define OV2640_SENSOR_REG04 0x04 diff --git a/bsp/tkm32F499/Libraries/Hal_lib/src/HAL_dma_bak.c b/bsp/tkm32F499/Libraries/Hal_lib/src/HAL_dma_bak.c index 5261f0cab80ff7371e3b5f72066d1af038db3e7e..50503ef3be732818b8f29dd23835f5c5006b8ec2 100644 --- a/bsp/tkm32F499/Libraries/Hal_lib/src/HAL_dma_bak.c +++ b/bsp/tkm32F499/Libraries/Hal_lib/src/HAL_dma_bak.c @@ -480,7 +480,7 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT) } /** -* @brief Clears the DMAy Channelx’s interrupt pending bits. +* @brief Clears the DMAy Channelx's interrupt pending bits. * @param DMA_IT: specifies the DMA interrupt pending bit to clear. * This parameter can be any combination (for the same DMA) of * the following values: