README.md · 雪枯灵T/CH32V003-ST7735-Driver

# CH32V003 ST7735 Driver

A minimal ST7735 LCD driver for CH32V003 that supports both [ch32v003fun](https://github.com/cnlohr/ch32v003fun) and [PlatformIO CH32V](https://github.com/Community-PIO-CH32V/platform-ch32v). It should also work in [MounRiver Studio](http://www.mounriver.com/).

DMA is used to accelerate the data transmission where possible.

![ST7735](images/ST7735.webp)

- [CH32V003 ST7735 Driver](#ch32v003-st7735-driver)
  - [Usage](#usage)
    - [Wiring](#wiring)
    - [Initialization](#initialization)
    - [Text](#text)
    - [Drawing](#drawing)
  - [Configuration](#configuration)
    - [Change Resolution and Offset](#change-resolution-and-offset)
    - [RGB Color Macro](#rgb-color-macro)
    - [Set Rotation and RGB Ordering](#set-rotation-and-rgb-ordering)
    - [Invert Colors](#invert-colors)
  - [Known Issues](#known-issues)
  - [CH32V003 Development Guide](#ch32v003-development-guide)
  - [References](#references)
  - [License](#license)

## Usage

### Wiring

ST7735 8-pin module

![ST7735 8-Pin Module](images/ST7735_8_Pin.webp)

| CH32V003         | ST7735      | Power | Description                           |
| ---------------- | ----------- | ----- | ------------------------------------- |
|                  | 1 - `LEDA`  |       | Connect to 3V3 via a 15-100Ω resistor |
|                  | 2 - `GND`   | `GND` | GND                                   |
| `PC2`            | 3 - `RESET` |       | Reset                                 |
| `PC3`            | 4 - `RS`    |       | DC (Data / Command)                   |
| `PC6` (SPI MOSI) | 5 - `SDA`   |       | SPI MOSI (Master Output Slave In)     |
| `PC5` (SPI SCLK) | 6 - `SCL`   |       | SPI SCLK (Serial Clock)               |
|                  | 7 - `VDD`   | `3V3` | VDD                                   |
| `PC4`            | 8 - `CS`    |       | SPI CS/SS (Chip/Slave Select)         |

Note: To not use CS, define the `ST7735_NO_CS` macro in `st7735.h`. Make ST7735 always enabled by pulling CS to ground.

```C
#define ST7735_NO_CS
```

### Initialization

Include the header file.

```C
#include "st7735.h"
```

Then invoke `tft_init()` function to initialize the driver.

```C
tft_init();
```

### Text

Print a string.

```C
tft_set_color(RED);
tft_set_background_color(BLACK);
tft_set_cursor(2, 2);
tft_print("Hello World!");
```

Print integers.

```C
tft_set_color(RED);
tft_set_background_color(BLACK);
tft_set_cursor(2, 10);
tft_print_number(123, 0);   // Align left as the width is less thant the number.
tft_set_cursor(2, 20);
tft_print_number(-123, 30); // Align right as the width is greater than the number.
```

### Drawing

Draw a pixel.

```C
tft_draw_pixel(80, 30, RED);
```

Draw a line.

```C
tft_draw_line(10, 10, 30, 30, BLUE);
```

Draw a rectangle.

```C
tft_draw_rect(10, 10, 30, 30, BLUE);
```

Fill a rectangle area.

```C
tft_fill_rect(10, 10, 30, 30, BLUE);
```

## Configuration

Depends on which ST7735 variants you have, it may require different configurations. You can configure the behavior in `st7735.h` or `st7735.c`.

### Change Resolution and Offset

```C
// st7735.h
#define ST7735_WIDTH    160
#define ST7735_HEIGHT   80
#define ST7735_X_OFFSET 1
#define ST7735_Y_OFFSET 26
```

### RGB Color Macro

```C
// st7735.h
#define RGB565(r, g, b) ((((r)&0xF8) << 8) | (((g)&0xFC) << 3) | ((b) >> 3))
#define BGR565(r, g, b) ((((b)&0xF8) << 8) | (((g)&0xFC) << 3) | ((r) >> 3))
#define RGB             RGB565
```

### Set Rotation and RGB Ordering

```C
// st7735.c
void tft_init(void)
{
    ...
    // Set rotation
    write_command_8(ST7735_MADCTL);
    write_data_8(ST7735_MADCTL_MY | ST7735_MADCTL_MV | ST7735_MADCTL_BGR);  // 0 - Horizontal
    // write_data_8(ST7735_MADCTL_BGR);                                        // 1 - Vertical
    // write_data_8(ST7735_MADCTL_MX | ST7735_MADCTL_MV | ST7735_MADCTL_BGR);  // 2 - Horizontal
    // write_data_8(ST7735_MADCTL_MX | ST7735_MADCTL_MY | ST7735_MADCTL_BGR);  // 3 - Vertical
    ...
}
```

### Invert Colors

```C
// st7735.c
void tft_init(void)
{
    ...
    // Invert display
    write_command_8(ST7735_INVON);
    // write_command_8(ST7735_INVOFF);
    ...
}
```

## Known Issues

- [x] (Fixed) ~~The CS pin does not work understand PlatformIO. Pull the CS pin to ground as a temporary solution.~~
- [x] (Fixed) ~~The draw text function creates partial text on a diagonal line from top left, I thought it is caused by hardware, it turns out I set a mistake the Y coordinate as X coordinate.~~

## CH32V003 Development Guide

[CH32V003 Development Guide](CH32V003_Dev_Guide.md)

## References

- [moononournation: Arduino_GFX](https://github.com/moononournation/Arduino_GFX)
- [Morita_Hikaru: CH32V003/Driver/CH32V003_LCD_Driver.zip](https://gitee.com/morita/ch32-v003/tree/master/Driver)
- [E. Brombaugh: SPI OLED demonstration](https://github.com/cnlohr/ch32v003fun/tree/master/examples/spi_oled)

## License

![CC by-nc-sa](images/by-nc-sa.svg)

This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0)](https://creativecommons.org/licenses/by-nc-sa/4.0/).

- Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial - You may not use the material for commercial purposes.
- ShareAlike - If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

雪枯灵T/CH32V003-ST7735-Driver

简介

发行版

贡献者

近期动态

雪枯灵T/CH32V003-ST7735-Driver .gitee-modal { width: 500px !important; }

简介

发行版

贡献者

近期动态

搜索帮助

雪枯灵T/CH32V003-ST7735-Driver